Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Bridges pull gives a cabinet or drawer a strong, architectural look using crisp edges and straight lines, so it fits well on both new work and upgrades. This Bridges collection piece is a cabinet and drawer pull designed around a 7-9/16 inch (192 mm) center to center dimension, so it spans wider drawer fronts comfortably while keeping mounting points consistent. The Belwith Keeler zinc construction creates a solid-feeling handle, which supports repeated daily use on kitchen, bath, or shop cabinetry. An oil rubbed bronze highlighted finish adds contrast along the edges, so the pull reads clearly against many door and drawer finishes. At 8-3/8 inches overall length, the pull covers previous handle marks on many common cabinet layouts, which helps when changing from another handle style. A 3/4 inch width and 1-1/4 inch projection give enough finger clearance for a positive grip.
This Bridges series pull is built around a 7-9/16 inch (192 mm) center to center mounting distance, so hole placement follows a known standard for longer cabinet pulls. Using that fixed spread lets layouts line up across banks of doors and drawers without recalculating each location. The 8-3/8 inch overall length gives a clear visual reference for locating the pull relative to panel edges, which helps when working from the end of a stile or rail. With a 1-1/4 inch projection, the handle stands off the face enough to clear fingers while remaining close to the cabinet, which matters on doors that open near adjacent walls or appliances. A 3/4 inch width keeps the footprint narrow on the face, helping align the pull on slim rails while still marking a straight visual line.
The Bridges collection design is described as drawing on architectural forms, so it suits cabinet runs where straight lines and sharp transitions are part of the overall look. With a 7-9/16 inch (192 mm) center to center span, this pull fits well on wider drawers that benefit from a longer grip point, such as kitchen base cabinets or deeper storage drawers. The 8-3/8 inch overall length allows the handle to visually anchor on tall pantry doors or long vanity drawers, helping tie multiple fronts together. Its 3/4 inch width keeps the pull from dominating narrow fronts, so it can be used on both doors and drawers within the same project. The oil rubbed bronze highlighted finish supports use on cabinets where a darker metal tone is preferred, while the highlighted edges maintain definition across changing light conditions in kitchens and workrooms.
The specified 7-9/16 inch (192 mm) center to center dimension allows installers to reuse common drilling templates, which speeds layout when repeating the same pull across a whole kitchen or bank of built-ins. Because the pull length is fixed at 8-3/8 inches, measuring from the handle ends back to edges of doors or drawers becomes straightforward, which helps keep reveals consistent. The 1-1/4 inch projection establishes predictable clearance for hand access, reducing the chance of knuckles brushing adjacent faces when operating doors close to corners. A 3/4 inch width on the face gives a reliable straight reference line, aiding in leveling each pull by sight even before final tightening. The zinc material adds weight and rigidity to the handle body, translating into a more solid feel when opening heavier storage, which matters in frequently used kitchen and shop cabinetry. The oil rubbed bronze highlighted finish delivers a defined edge line, supporting visual alignment checks down a long run of doors and drawers.
The Hickory Hardware Bridges pull uses a 7-9/16 inch (192 mm) center to center span, which suits wider cabinet doors and drawers where a longer grip improves leverage and visual balance.
The Bridges series pull measures 8-3/8 inches in overall length, so it stretches beyond the mounting holes and covers more of the drawer or door face for a stronger visual line.
The 1-1/4 inch projection is how far the pull stands off the surface, providing finger and knuckle clearance so doors and drawers can be operated comfortably in daily cabinet use.
The P3236-OBH Bridges pull is made from zinc, which gives the handle body rigidity and a solid feel when opening and closing heavier cabinet doors and drawers.
The oil rubbed bronze highlighted finish creates a dark base with lighter highlights on edges, helping the pull stand out visually on cabinet faces under typical interior lighting.
The manufacturer part number P3236-OBH identifies this Bridges collection zinc pull in the oil rubbed bronze highlighted finish, supporting consistent reordering across multiple cabinet projects.
The Hickory Hardware Bridges pull in oil rubbed bronze highlighted finish combines a 7-9/16 inch (192 mm) center to center span with an 8-3/8 inch overall length, so it bridges wider fronts while maintaining standard drilling. With a 3/4 inch width and 1-1/4 inch projection, it offers a usable grip and predictable clearance on doors and drawers. The zinc construction and defined architectural lines support use across multiple rooms where a consistent handle is preferred. For projects calling for this specific look and dimensional layout, this P3236-OBH Bridges pull from Wurth Baer Supply is ready for cabinet runs that need a coordinated, measured hardware choice.
Sold In: 1 Each
