Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Bridges Series pull gives cabinets and drawers a defined architectural look, using crisp edges and strong lines that visually echo bridge structures on finished projects. This P3235-CH pull from the Bridges collection is produced under the Belwith Keeler brand, so part numbers match common hardware schedules and purchasing lists across jobs. The pull uses a 6-5/16 inch (160 mm) center to center mounting dimension, which aligns directly with drilling patterns laid out for this standard size on cabinet doors and drawer fronts. Its overall length of 7 inches gives the hardware a balanced span across medium and wider fronts, helping handles look proportionate on contemporary layouts. The 1-3/16 inch projection holds the hand away from the surface during use, while the 3/4 inch width keeps the grip slim for a clean, linear appearance on face frames and panel fronts.
This P3235-CH Bridges Series pull is specified with a 6-5/16 inch (160 mm) center to center dimension, so hole locations align with that metric standard during layout. That spacing works well across a range of drawer widths, giving hardware a consistent mounting reference line across banks of cabinets. The pull length of 7 inches leaves a small margin beyond each mounting point, which helps hardware appear centered and balanced without crowding panel edges. A projection of 1-3/16 inches brings the gripping surface forward enough for the hand, while still keeping the handle close to the cabinet face to stay within typical clearance envelopes. The 3/4 inch width narrows the contact footprint on the front, which is useful where stile widths, rail sizes, or edge profiles limit available flat space.
The P3235-CH Hickory Hardware Bridges Series pull works on cabinet drawers and cabinet doors that use the 6-5/16 inch (160 mm) mounting standard, tying both into a single visual family. Its chrome finish supports use in kitchens, baths, and utility spaces where other chrome fixtures appear, allowing the pull to repeat that metal tone across casework. The Bridges collection styling, with its crisp edges and strong lines, suits cabinets that lean toward architectural or structured designs, aligning hardware with squared face frames, flat-panel doors, or slab drawer fronts. Because Belwith Keeler is identified as the brand, the P3235-CH part number can match specifications that call for Belwith decorative hardware in the handles and pulls category. This keeps cabinet hardware consistent whether it is selected for new construction or for refresh work on existing cabinets.
The 160 mm center to center measurement on this Bridges pull gives installers a fixed metric reference, simplifying layout jigs set up around that spacing for repeated drilling across multiple fronts. When replacing other 160 mm hardware, this dimension lets the P3235-CH pull occupy the same mounting holes, which keeps fronts intact while upgrading the visual style to the Bridges collection. The 7 inch length spreads the pull almost a full inch beyond the mounting points, which helps mask slight variances in drilling while still reading as centered hardware. Its 1-3/16 inch projection creates a defined stand-off that protects finished cabinet faces from direct handling contact as drawers and doors are operated. The 3/4 inch width produces a linear, easily aligned edge that can visually track with stiles, rails, or adjacent pulls, supporting straight sightlines across longer cabinet runs.
The Hickory Hardware Bridges Series pull P3235-CH has a 6-5/16 inch (160 mm) center to center size, so drilling layouts follow that metric standard on cabinet doors and drawers.
The P3235-CH pull has a 7 inch overall length, giving it visual reach across the front while still fitting comfortably on typical cabinet doors and drawer fronts.
The Bridges Series P3235-CH pull has a 1-3/16 inch projection, positioning the grip forward from the cabinet face for hand clearance during everyday use.
The P3235-CH Bridges collection pull is made from zinc, providing a stable base material under the chrome finish on cabinet installations.
The Belwith Keeler Bridges Series pull P3235-CH has a chrome finish, allowing it to coordinate with other chrome cabinet hardware and fixtures.
The P3235-CH pull is part of the Hickory Hardware Bridges collection and is identified under the Belwith Keeler brand within the handles and pulls product class.
Hickory Hardware Bridges Series pull P3235-CH combines a 6-5/16 inch (160 mm) center to center size with a 7 inch length, 1-3/16 inch projection, and 3/4 inch width to support consistent cabinet hardware layouts. Its chrome finish and zinc construction align with Bridges collection styling, while the Belwith Keeler branding and clear part number simplify specifying this pull alongside other decorative hardware. For projects built around 160 mm drilling patterns and a structured architectural look, selecting this Bridges Series pull helps align cabinet doors and drawers to a single, coordinated handle profile.
Sold In: 1 Each
