Hickory Hardware Bridges pull is a 12 inch center to center cabinet pull designed for drawers and doors where a long, continuous grip is needed. The pull belongs to the Bridges collection, so its crisp edges and strong lines follow a consistent design language that helps visually tie multiple fronts together on the same run of cabinetry. The pull is made from zinc, giving a solid metal construction that supports everyday use on frequently opened cabinets. A satin nickel finish covers the pull, so it presents a muted metallic look that works well across many surrounding hinge and knob finishes on the same installation. The overall length of 12-3/4 inches means the ends overhang slightly past the 12 inch drill spread, which visually frames wider drawer fronts while still keeping hole locations standard. A projection of 1-1/2 inches sets the gripping surface off the face of the cabinet to provide finger clearance during normal opening and closing.
This Bridges series pull is drilled for a 12 inch center to center hole spacing, which sets the exact distance between mounting holes when laying out new fronts or matching an existing pattern. The 12-3/4 inch overall length means the bar extends 3/8 inch beyond each hole, so the installer can position the fasteners at predictable points while still getting a full-length handle appearance. With a 3/4 inch width, the pull sits as a narrow band across the face, which helps when aligning multiple pulls along a rail or stile because there is a clear linear reference. The 1-1/2 inch projection establishes how far the grip stands off the cabinet surface, so doors can swing or drawers slide without knuckles contacting the face during normal operation.
This satin nickel pull from the Bridges collection is sized for installations that call for a 12 inch center to center span, so it fits cabinets or drawers where that drilling pattern is specified on shop drawings or templates. On long drawer fronts, the 12-3/4 inch overall length lets the pull cover more of the horizontal run, giving a centered grip point that still leaves visible field around the hardware for the wood or panel finish. The 3/4 inch width keeps the visual footprint slim, which is useful on overlay doors or narrow rails where a bulkier handle could crowd edge reveals. Because the finish is satin nickel, the pull can sit alongside satin nickel hinges or other decorative hardware from the same Bridges collection to keep surfaces visually coordinated across a full kitchen or built-in project.
The fixed 12 inch center to center dimension provides a predictable mounting reference, which helps when drilling repeated fronts using jigs or CNC programs that are set to that spacing. The 1-1/2 inch projection defines the stand-off from the face, giving enough clearance for hands behind the bar so drawers can be pulled open without fingers rubbing against the cabinet surface. With a 12-3/4 inch overall length, the ends of the pull extend evenly beyond both mounting points, which helps installers align the hardware visually to door and drawer edges by referencing the bar rather than just the fastener locations. The zinc material gives the pull a metal body that supports daily gripping forces on active doors and drawers, while the satin nickel finish provides a consistent exterior surface that maintains the Bridges collection look wherever this model is used.
The P3238-SN pull has a 12 inch center to center spacing, a 12-3/4 inch overall length, a 3/4 inch width, and a 1-1/2 inch projection, which together define its footprint and hand clearance on the cabinet.
The 12 inch center to center layout gives a standard drilling distance between mounting holes, which supports consistent hole placement when repeating this Bridges collection pull across multiple doors and drawers.
The Hickory Hardware Bridges pull is made from zinc, so the handle body is metal and suited to repeated gripping on frequently used cabinet doors and drawers in day-to-day use.
This Bridges collection cabinet pull uses a satin nickel finish, giving it a soft metallic appearance that pairs with other satin nickel decorative hardware on the same project.
The P3238-SN pull has a 1-1/2 inch projection, so the gripping surface stands that distance off the cabinet face, creating finger clearance during normal opening and closing.
This satin nickel cabinet pull belongs to the Bridges collection by Hickory Hardware, so it carries the collection's crisp edges and strong lines that support a coordinated hardware layout.
This Hickory Hardware Bridges pull, model P3238-SN, combines a 12 inch center to center drilling with a 12-3/4 inch overall length, giving a long handle suited to wider cabinet fronts. The zinc construction and satin nickel finish align with the Bridges collection design, so the pull matches other Bridges pieces on the same run. With a 3/4 inch width and 1-1/2 inch projection, the handle offers a defined grip line and workable clearance from the cabinet face. For projects calling for a 12 inch drilling pattern and a satin nickel Bridges aesthetic, this pull provides the specified dimensions and collection styling in a single part.
Sold In: 1 Each
