Amerock Aloft edge pull is an aluminum tab pull in a black chrome finish designed for modern cabinet and furniture projects. The 4-3/16 in (106 mm) center-to-center drilling lines this pull up with standard metric boring, which helps maintain consistent spacing across multiple fronts. Its subtle profile described as graceful curvature creates a low-visual-height option, useful when a project calls for clean, contemporary lines rather than bulky projections. The 5-13/16 in (148 mm) overall length spreads the grip visually across the door or drawer, giving more design presence without adding extra mounting holes. With a projection of 1-9/16 in (40 mm), the pull stands off the surface far enough to get fingers behind it, which supports comfortable opening and closing on everyday-use cabinets.
The 4-3/16 in (106 mm) center-to-center mounting dimension defines the drilling pattern for the Amerock Aloft edge pull, which guides hole placement on doors and drawers. Using this spacing keeps each pull aligned, particularly on banks of drawers where small deviations show quickly. The base length and overall length of 5-13/16 in (148 mm) mean the pull extends past the mounting holes at both ends, so the visible metal covers the bored area and presents a continuous edge. With a base width of 11/16 in (17 mm), the pull occupies a narrow band at the panel edge, helping maintain clearances to adjacent fronts in tight reveals.
The Amerock Aloft Series tab pull fits decorative hardware applications across cabinets and furniture, where a contemporary look is desired. Its aluminum construction keeps the pull lightweight, which suits both framed and frameless cabinet fronts without adding unnecessary door weight. In a run of upper cabinets, the 5-13/16 in (148 mm) length creates a continuous visual rhythm along the edges, supporting a uniform hardware line. On drawer stacks, the 4-3/16 in (106 mm) center-to-center spacing allows multiple pulls to share a common drilling layout, which helps align fronts across different cabinet widths. The black chrome finish supports designs using darker paints, stains, or laminates, tying hardware into the overall color story.
The defined 4-3/16 in (106 mm) center-to-center dimension on the Aloft edge pull gives installers a single reference point for boring patterns, which reduces layout variation from cabinet to cabinet. Its 1-9/16 in (40 mm) projection provides a fixed stand-off from the face, helping maintain consistent hand clearance even when door thickness varies within a project. The 11/16 in (17 mm) width limits how far the pull occupies the face, which can help preserve reveals on minimalist fronts and keep hardware inside narrow rails. Matching base length and overall length at 5-13/16 in (148 mm) mean what is measured is what shows, which simplifies planning when aligning pulls to panel edges or adjacent hardware. The aluminum material pairs with the M4 screw sizing noted in the description, supporting a straightforward connection between the pull body and standard cabinet fronts.
The Amerock Aloft pull has a 4-3/16 in (106 mm) center-to-center, 5-13/16 in (148 mm) length, 1-9/16 in (40 mm) projection, and 11/16 in (17 mm) width, which defines drilling layout and hand clearance.
The pull uses aluminum with a black chrome finish, which provides a lightweight construction with a dark, reflective surface suited to contemporary cabinet and furniture designs.
The 106 mm center-to-center spacing matches a common metric drilling pattern, which helps installers maintain consistent hole locations across multiple cabinet doors and drawers.
The 1-9/16 in (40 mm) projection sets how far the pull stands off the cabinet face, giving room for fingers to grip while keeping the profile relatively low on the door or drawer.
The pull is 11/16 in (17 mm) wide across the face, which keeps the hardware visually slim and helps it fit tight reveals or narrow rails on modern cabinet designs.
The BP36743BCR part number identifies this specific Aloft Series aluminum edge pull in black chrome, which helps match additional pulls to an existing installation.
The Amerock Aloft Series 4-3/16 in (106 mm) center-to-center black chrome tab pull gives installers a defined drilling pattern, clear projection, and slim width for contemporary cabinet work. Using its 5-13/16 in (148 mm) length and 11/16 in (17 mm) face width, projects can repeat the same hardware geometry from door to door, helping banks of cabinets, drawer stacks, and furniture pieces present a unified, modern hardware line.
Sold In: 1 Each
