Amerock Aloft edge pull is a satin nickel tab pull designed to give contemporary cabinets a clean, streamlined grip point. The pull uses a 4-9/16 in (116 mm) center-to-center hole spacing, which fits common modern cabinet drilling layouts and supports straightforward alignment during layout work. Its aluminum construction keeps the pull light while still providing a defined edge to catch with fingertips, which helps when opening large or heavy fronts. The satin nickel finish delivers a muted metallic look that visually blends with many hinge and appliance finishes, supporting a consistent appearance across a run of doors and drawers. A projection of 1-9/16 in (40 mm) creates a usable hand clearance from the cabinet face, helping fingers hook the pull without rubbing the surface. The slim 11/16 in (17 mm) width keeps the profile minimal, which suits flat-panel and slab fronts where a low visual footprint is preferred.
This Aloft series tab pull is built around a 4-9/16 in (116 mm) center-to-center layout, so the distance between mounting holes is fixed for predictable drilling on cabinet faces. The 7-3/4 in (197 mm) overall and base length mean the pull extends beyond the screw locations, giving some visual coverage around the fastener line once mounted. With an 11/16 in (17 mm) base width, the pull occupies a narrow strip along the door or drawer edge, which matters when working near panel reveals or tight gaps. Its 1-9/16 in (40 mm) projection defines the stand-off from the cabinet front, affecting how deep a finger grip an installer or user experiences in daily operation.
The Amerock Aloft series 4-9/16 in (116 mm) center-to-center satin nickel tab pull lines up well with contemporary cabinet layouts that favor linear hardware. Because the pull length is 7-3/4 in (197 mm), it occupies a noticeable span along door and drawer edges, which suits medium to wider fronts that benefit from a longer handle line. The slim 11/16 in (17 mm) width allows it to sit close to edges and reveals without visually crowding adjacent fronts, supporting tight, uniform gaps common in modern cabinetry. Its aluminum construction and satin nickel finish position it for use on projects where a metal pull is desired without a bulky handle shape, such as flat-panel kitchens, baths, or built-ins that call for a minimal tab profile.
The fixed 4-9/16 in (116 mm) center-to-center measurement helps installers repeat the same drilling pattern across a run, which is important for clean sight lines when doors and drawers line up. Having the base length match the overall length at 7-3/4 in (197 mm) means the visible footprint corresponds directly to the pull body, which simplifies layout when aligning multiple pulls at the same distance from cabinet edges. The 1-9/16 in (40 mm) projection gives consistent hand clearance from piece to piece, so users experience the same grip depth on every front. The satin nickel finish applied across the aluminum body creates a uniform look from pull to pull, supporting visual continuity on large installations. The defined tab profile that results from the 11/16 in (17 mm) width and 40 mm projection offers a repeatable feel when opening cabinets, helping everyday use remain consistent throughout the space.
The Amerock Aloft edge pull has a 4-9/16 in (116 mm) center-to-center dimension, which sets the hole spacing and aids in laying out consistent drilling across cabinets.
The Aloft BP36744G10 tab pull has an overall and base length of 7-3/4 in (197 mm), providing a long gripping line along the cabinet edge.
This satin nickel Aloft pull projects 1-9/16 in (40 mm) from the cabinet face, creating space for fingers to hook behind the tab during use.
The Amerock Aloft edge pull has a base width of 11/16 in (17 mm), producing a narrow visible band that suits modern, minimal cabinet designs.
The pull is made from aluminum with a satin nickel finish, combining a metal body with a soft metallic appearance for contemporary spaces.
This Aloft edge pull is identified by Amerock manufacturer part number BP36744G10, which distinguishes it from other sizes or finishes in the collection.
The Amerock Aloft edge pull BP36744G10 brings a 4-9/16 in (116 mm) center-to-center layout, 7-3/4 in (197 mm) length, and 1-9/16 in (40 mm) projection together in a satin nickel aluminum body, giving installers a defined, repeatable hardware option for contemporary cabinet runs. Selecting this specific size and finish lets project specs call out a consistent tab pull profile across kitchens, baths, or built-ins where a slim 11/16 in (17 mm) width and modern appearance are part of the design intent.
Sold In: 1 Each
