Amerock Aloft Series 4-3/16 in (106 mm) Center to Center Polished Nickel Tab Pull, -BP36743PN

Amerock Aloft Tab Pull For Contemporary Cabinets

Amerock Aloft tab pull turns functional cabinet hardware into a clean modern detail by using a graceful curved profile that creates a visually seamless look across the cabinet edge. The pull is part of the Amerock Aloft Collection, so it follows a consistent design language for contemporary spaces. The aluminum construction keeps the pull light while still providing a solid feel in hand during everyday cabinet and drawer use. A polished nickel finish gives the metal a bright, reflective appearance that pairs well with many modern laminates and contemporary wood tones. The tab style profile lets the pull sit low while still providing finger clearance, which supports a smooth open-and-close motion on doors or drawers. With these details working together, this pull delivers a streamlined, practical touch point that suits professional woodworking projects and serious DIY installations.

Key Aloft Edge Pull Details For Projects

• The 4-3/16 in (106 mm) center-to-center drilling matches the stated length between mounting holes, which supports straightforward layout on cabinet doors and drawers using common metric or imperial marking tools.
• The overall length of 5-13/16 in (148 mm) gives the pull enough span across the door or drawer edge to feel substantial in use while keeping proportions balanced on many standard cabinet fronts.
• A projection of 1-9/16 in (40 mm) sets the working distance from the cabinet face, which provides finger room behind the pull while keeping the profile tight to the front for a minimal appearance.
• The 11/16 in (17 mm) width establishes a slim face dimension, which helps maintain a light visual line across the cabinet edge while still presenting a defined grip surface.
• Matching base length of 5-13/16 in (148 mm) and base width of 11/16 in (17 mm) create a uniform footprint on the cabinet surface, which helps distribute hand force and align the pull cleanly with door or drawer edges.

Mounting Dimensions That Support Clean Alignment

The 4-3/16 in (106 mm) center-to-center spacing provides a precise drilling reference, which helps installers align multiple Amerock Aloft pulls consistently across a bank of doors or drawers. Because the center-to-center dimension is given in both inches and millimeters, it fits into layout workflows based on either system, which can streamline shop preparation and on-site fitting. The 5-13/16 in (148 mm) overall length and matching base length allow the pull to span the cabinet edge in a controlled way, which aids in visually lining the ends with panel lines or door corners. With a projection of 1-9/16 in (40 mm), the pull stands off the surface enough for fingers to engage from below or the side, which helps users operate heavier doors and drawers without scraping knuckles against the front.

Using The Aloft Edge Pull In Real Projects

Amerock Aloft Pull In Contemporary Cabinet Runs

The Amerock Aloft Series 4-3/16 in (106 mm) center-to-center polished nickel tab pull is built for decorative hardware applications, so it fits naturally into cabinet, furniture, and built-in projects that call for a modern, streamlined profile. The polished nickel finish reflects surrounding light and finishes, which can help tie together other bright metal elements in a kitchen, bath, or commercial millwork installation. Aluminum material keeps the pull lighter than many solid brass options, which can be useful when outfitting large runs of upper cabinets or tall doors where overall door weight is a consideration. Because the base length and face length both measure 5-13/16 in (148 mm), the pull creates one continuous line along the cabinet edge, which supports clean alignment on frameless and face-frame styles where visual continuity matters.

Dimensions And Finish That Reduce Rework

The defined 4-3/16 in (106 mm) center-to-center drilling dimension allows jigs or drill guides to be set once and repeated, which reduces layout time and helps limit rework caused by misaligned holes. A consistent 11/16 in (17 mm) width from base to top face means the pull seats on a predictable footprint, which can simplify edge reveals and help installers keep parallel lines along adjacent doors. The 1-9/16 in (40 mm) projection gives a known stand-off, which lets designers coordinate clearances with nearby walls, appliances, or adjacent doors in tight cabinetry runs. The polished nickel finish works over the aluminum body to present a unified surface, which helps projects maintain a cohesive appearance between pulls on doors and drawers. Together, these measured details support repeatable results when the Amerock BP36743PN pull is used across multiple cabinets in a job.

Common Questions About Amerock Aloft Tab Pull

Select This Aloft Pull For Defined Modern Lines

The Amerock Aloft Series 4-3/16 in (106 mm) center-to-center polished nickel tab pull combines aluminum construction, a polished nickel finish, and a low-profile tab form to support clean, modern cabinet lines. With clearly defined center-to-center, length, width, and projection dimensions, this Amerock decorative hardware piece fits into layouts that depend on repeatable drilling and consistent visual spacing. For projects where a slim, contemporary edge pull is needed across multiple doors and drawers, this BP36743PN model offers a precise set of measurements and a coordinated finish that work well in professional woodworking and advanced DIY cabinet work.