Amerock Aloft edge pull is an aluminum tab pull in the Aloft collection with a polished nickel finish, so it delivers a slim modern look that matches other polished nickel decorative hardware on a project. The pull has a center-to-center dimension of 4-9/16 in (116 mm), which sets the bore spacing for cabinet or drawer fronts and keeps drilling layouts consistent across a run of doors. Overall length is 7-3/4 in (197 mm), so the pull extends past the bore pattern to create a clean edge detail and a secure finger grip point along the cabinet front. The projection of 1-9/16 in (40 mm) sets how far the pull stands off the surface, giving room for fingers while keeping a low-profile appearance on contemporary casework. A width of 11/16 in (17 mm) creates a narrow tab edge that reads light visually on doors and drawers.
This Amerock Aloft series tab pull is defined by a 4-9/16 in (116 mm) center-to-center dimension, so hole spacing on cabinet or drawer fronts follows that measurement for proper fit. The 7-3/4 in (197 mm) length and matching base length determine how much linear space is required on the mounting edge, which guides placement on narrower or wider fronts. A width of 11/16 in (17 mm) sets the strip of hardware visible on the cabinet face, allowing planning of reveals relative to door thickness and adjacent fronts. The 1-9/16 in (40 mm) projection establishes the stand-off distance from the surface, which affects how the pull feels in hand and how far it extends into the working envelope around the cabinetry.
The Amerock Aloft series 4-9/16 in (116 mm) center-to-center polished nickel tab pull is part of the Aloft collection, so it fits projects built around that coordinated family of decorative hardware. Its polished nickel finish suits cabinet and furniture installations that already feature polished nickel hinges, knobs, or pulls, keeping metal tones consistent across the room. With a length of 7-3/4 in (197 mm) and a narrow 11/16 in (17 mm) width, the pull works on doors and drawer fronts where a slim linear edge detail is preferred rather than a bulkier handle. The 1-9/16 in (40 mm) projection and tab profile support contemporary residential or commercial cabinetry where a low visual mass and clear finger grip are both needed in daily use.
The fixed 4-9/16 in (116 mm) center-to-center spacing on this BP36744PN tab pull allows installers to standardize boring jigs or CNC programs, which helps keep handle locations uniform from piece to piece. Having the base length match the overall 7-3/4 in (197 mm) length simplifies layout along the cabinet edge, because the visible hardware footprint equals the mounting footprint. The 11/16 in (17 mm) base width provides a repeatable reveal line, so when multiple Aloft pulls are aligned, the slim band of polished nickel appears consistent across every front. The 1-9/16 in (40 mm) projection stays the same on each installation, producing a predictable reach depth for users and helping casework designers understand exactly how far the hardware will extend into door clearances and walk paths.
The Amerock Aloft BP36744PN is an aluminum tab-style edge pull with a polished nickel finish, so it presents a slim modern profile on cabinet doors and drawers.
This Aloft edge pull has a 4-9/16 in (116 mm) center-to-center dimension, setting the exact drilling distance between mounting holes on cabinet or drawer fronts.
The Amerock Aloft edge pull measures 7-3/4 in (197 mm) in overall length, so it spans a noticeable portion of the cabinet edge for grip and visual impact.
The BP36744PN tab pull projects 1-9/16 in (40 mm) from the mounting surface, providing finger clearance while maintaining a streamlined contemporary look.
This Aloft pull has a width of 11/16 in (17 mm) and a base length of 7-3/4 in (197 mm), defining the narrow visible band along the cabinet edge.
The Aloft 116 mm center pull is made from aluminum with a polished nickel finish, pairing light weight with a bright metallic surface on cabinetry.
The Amerock Aloft series 4-9/16 in (116 mm) center-to-center polished nickel tab pull BP36744PN combines aluminum construction, a defined 7-3/4 in (197 mm) length, and a 1-9/16 in (40 mm) projection, giving installers predictable drilling, grip depth, and visual reveal on contemporary cabinet and drawer fronts.
Sold In: 1 Each
