Aloft edge pull 106mm satin nickel is an Amerock aluminum tab pull designed for contemporary cabinet and furniture projects, so it gives installers a clean modern option grounded in precise dimensions. The pull has a 4-3/16 in (106 mm) center-to-center, which aligns well with common drilling patterns for streamlined layout on multi-door runs. Its 5-13/16 in (148 mm) overall length provides visual presence across wider fronts while still fitting on standard cabinet doors and drawers. The 11/16 in (17 mm) width creates a slim tab profile that suits minimalist designs where the hardware should stay visually light. A 1-9/16 in (40 mm) projection offers enough finger clearance for everyday use, supporting comfortable opening without crowding adjacent fronts. The satin nickel finish ties into many contemporary hinge and fixture finishes, helping maintain a consistent look across the installation.
The 4-3/16 in (106 mm) center-to-center spacing on the Amerock BP36743G10 edge pull sets precise hole locations, so shop drilling jigs or CNC programs can repeat the pattern efficiently. With a base length and overall length both at 5-13/16 in (148 mm), the pull covers the full drilled area, which helps conceal slight variances at the ends of routed or drilled edges. Its 11/16 in (17 mm) base width defines the tab footprint on the door or drawer front, guiding edge reveals and hardware layout near adjacent fronts. The 1-9/16 in (40 mm) projection determines how far the gripping surface stands off the face, affecting clearance when doors open near walls or appliances. Satin nickel finish on the aluminum body brings a consistent color tone from pull to pull, which matters when hardware lines across large cabinet banks.
The Amerock Aloft series tab pull is part of Amerock decorative handles and pulls, placing it directly in cabinet and furniture applications where appearance and precise sizing both matter. Its 4-3/16 in (106 mm) center-to-center spacing suits modern frameless and face-frame cabinetry that favors elongated hardware lines. The 5-13/16 in (148 mm) length makes this pull well suited to medium and wider drawer fronts, adding a clear grasp point without overwhelming narrow faces. A slim 11/16 in (17 mm) width keeps the hardware visually light, which supports designs that rely on flat slab doors and uninterrupted grain patterns. Satin nickel finish works alongside many popular appliance and faucet finishes, allowing this pull to sit comfortably in kitchens, baths, and built-ins that share the same metal tone.
The defined 4-3/16 in (106 mm) center-to-center measurement on the Amerock BP36743G10 edge pull simplifies layout for installers building repetitive cabinet runs, because every pull shares the same fixed spacing. Matching base length and overall length at 5-13/16 in (148 mm) give a straight, continuous edge presentation, which helps lined-up doors and drawers read as a clean band of metal. The 11/16 in (17 mm) width controls how much of the door or drawer edge is covered, giving designers a predictable reveal line to echo across a project. Its 1-9/16 in (40 mm) projection establishes a consistent hand feel from cabinet to cabinet, so users experience the same grip depth across the installation. Aluminum material keeps each satin nickel aluminum cabinet pull light, which can help maintain alignment when mounted on thinner fronts or lighter doors.
The Amerock Aloft BP36743G10 pull has 4-3/16 in (106 mm) center-to-center spacing, giving clear drilling locations for consistent mounting across doors and drawers.
The pull length is 5-13/16 in (148 mm), so it spans a good portion of typical cabinet doors and drawers for balanced appearance and usable grip area.
The Aloft edge pull projects 1-9/16 in (40 mm) from the cabinet face, giving practical finger clearance while keeping the profile tight to the front.
The Amerock Aloft series BP36743G10 pull is made from aluminum, which supports a modern metal look with relatively light weight on the door or drawer.
The pull has a satin nickel finish, so it coordinates with satin nickel hinges, faucets, and lighting used in many contemporary cabinet projects.
The Amerock Aloft BP36743G10 tab pull is 11/16 in (17 mm) wide, creating a slim edge detail that supports minimalist cabinet and furniture designs.
The Amerock Aloft edge pull 106mm satin nickel offers clearly stated dimensions, from its 4-3/16 in (106 mm) center-to-center spacing to its 5-13/16 in (148 mm) length and 1-9/16 in (40 mm) projection. Those fixed measurements help installers and designers plan hole locations, reveals, and clearances with confidence. The aluminum construction and satin nickel finish tie the pull to contemporary cabinet hardware programs. Select this Amerock BP36743G10 tab pull when a slim, modern profile with predictable sizing is a priority for your next cabinet or furniture run.
Sold In: 1 Each
