Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Aloft tab pull gives you a low-profile handle solution designed for contemporary spaces, so it fits clean-lined cabinet layouts where visible hardware needs to stay minimal. The aluminum construction provides a light, rigid pull body, which supports straightforward handling during layout, drilling, and fastening. Its polished nickel finish delivers a bright, reflective surface, which visually aligns with other polished nickel decorative hardware in the same project. The 8-9/16 in (217 mm) center-to-center dimension defines the mounting hole spread, so it sets your drilling pattern when laying out multiple doors or drawers. Overall length of 11-11/16 in (297 mm) extends the pull beyond the mounting points, which offers more finger contact area along the edge. A projection of 1-9/16 in (40 mm) stands the pull off the cabinet face enough to grab comfortably while still reading as a subtle tab profile.
The 8-9/16 in (217 mm) center-to-center measurement on this Amerock Aloft edge pull fixes the distance between mounting holes, which lets installers set up drilling templates for consistent alignment across doors and drawer fronts. With a base length of 11-11/16 in (297 mm), the pull extends past the holes toward each end, which helps visually center the pull along wider edges and provides more contact surface for users. The 11/16 in (17 mm) width defines how far the pull face runs across the cabinet edge, which influences how it visually frames the door or drawer front. Matching base width of 11/16 in (17 mm) maintains a uniform strip along the edge, which keeps the profile slim while still presenting a defined gripping line.
The Amerock Corporation BP36746PN Aloft edge pull is built for decorative hardware roles on cabinets and similar casework, so it suits handle and pull applications where a tab-style profile is preferred over bulkier handles. Its subtle Aloft collection styling delivers a visually seamless design, which supports modern and contemporary room plans that emphasize flat-panel fronts and straight lines. The polished nickel finish brings a reflective, metallic tone, which can coordinate with appliances, faucets, or other bright metal elements in kitchens or baths. Because the center-to-center drilling is 8-9/16 in (217 mm), this pull aligns well with layouts that call for longer pulls on wider drawers or tall doors, giving a proportionally scaled handle across the cabinet run.
The defined 8-9/16 in (217 mm) center-to-center spacing on the Amerock Aloft tab pull translates directly into repeatable drilling, which helps installers maintain straight sightlines across long banks of cabinets. With an overall length of 11-11/16 in (297 mm), the pull offers extra edge coverage beyond the hole pattern, which can help visually mask minor drilling variances along the run. The 1-9/16 in (40 mm) projection sets the stand-off from the door face, which guides how far to position adjacent doors and drawers when planning reveals so fingers can enter behind the pull comfortably. At 11/16 in (17 mm) width, the slim front profile presents a narrow bar along the edge, which can reduce visual clutter on minimalist cabinet fronts. The aluminum material keeps the pull lighter than many solid metal options, which can be useful when hardware weight is a consideration across large installations.
The Amerock Aloft tab pull has an 8-9/16 in (217 mm) center-to-center dimension, which sets the exact spacing for drilling the two mounting holes on cabinet doors and drawers.
The Amerock Corporation BP36746PN pull is 11-11/16 in (297 mm) long, so it spans a wider section of the cabinet edge and suits larger drawers or taller doors.
The Aloft edge pull is made from aluminum with a polished nickel finish, which provides a light pull body with a bright, reflective surface for contemporary cabinet designs.
This Amerock Aloft tab pull projects 1-9/16 in (40 mm) from the cabinet face, providing hand clearance while keeping a low-profile tab look on the door or drawer.
The BP36746PN Aloft pull has a width of 11/16 in (17 mm), creating a slim strip along the cabinet edge that fits modern, minimal front designs.
This pull is part of the Amerock Aloft collection, so its graceful curvature and subtle profile coordinate with other Aloft decorative hardware pieces.
The Amerock Aloft tab pull BP36746PN pairs a polished nickel finish with an 8-9/16 in (217 mm) center-to-center layout, giving you a contemporary handle solution that aligns visually and dimensionally across cabinet runs. With its 11-11/16 in (297 mm) length, 1-9/16 in (40 mm) projection, and 11/16 in (17 mm) width, the pull offers an elongated yet slim profile suited to flat-panel doors and drawers. Choosing this aluminum Aloft edge pull lets you coordinate modern styling and precise drilling dimensions from one decorative hardware source on your next project.
Sold In: 1 Each
