Amerock Aloft tab pull turns the practical pull into a low-profile grip that works cleanly across modern cabinet runs. The pull is part of the Amerock Aloft collection, so its shape and proportions follow that coordinated contemporary design family. The aluminum construction keeps weight down while delivering a solid metal part that suits everyday cabinet use. A polished chrome finish adds a bright, reflective surface that visually ties into other chrome decorative hardware. Center-to-center length of 6-9/16 in, or 167 mm, sets consistent spacing for cabinet drilling layouts across doors and drawers. Overall base length of 9-3/4 in, or 248 mm, lets the pull visually span wider drawer fronts for a balanced look. A projection of 1-9/16 in, or 40 mm, creates finger clearance from the cabinet face for a usable grip. Base width of 11/16 in, or 17 mm, keeps the profile slim along cabinet edges.
The listed center-to-center of 6-9/16 in, or 167 mm, defines the distance between mounting points, so existing or planned boring patterns can match this pull precisely. An overall base length of 9-3/4 in, or 248 mm, means the pull will visually cover that span along the cabinet edge, which matters when aligning several pulls in a row. Base width of 11/16 in, or 17 mm, sets how much surface at the cabinet edge the pull will occupy, which impacts how it sits on narrow or thick door fronts. The 1-9/16 in, or 40 mm, projection establishes how far the grip extends from the face, positioning fingers away from the cabinet surface during operation. With a slim profile and consistent measurements, this Amerock Aloft edge pull supports repeatable hole drilling and alignment across multiple cabinet pieces.
The Amerock Aloft series design turns a simple pull into a linear edge detail that suits contemporary cabinet banks. The polished chrome finish works well where bright metal details are already part of the space, such as chrome faucets or chrome-framed appliances. With a center-to-center dimension of 6-9/16 in, or 167 mm, this pull fits layouts based on that metric or inch spacing, supporting consistent hole placement along upper and base cabinets. The 9-3/4 in, or 248 mm, length lets the pull visually anchor wider drawers and tall doors, helping larger fronts look proportionate. A projection of 1-9/16 in, or 40 mm, provides grip depth that keeps fingers clear of the door or drawer face, which is useful on heavier fronts that see frequent use. The aluminum material keeps added weight to a minimum when many pulls are installed in a kitchen or commercial bank.
The 167 mm center-to-center measurement ties directly to drill locations, so installers can run repeatable boring patterns across a project without adjusting jigs between doors and drawers. That same consistent spacing simplifies planning when replacing existing 6-9/16 in pulls with this Amerock BP3674526 pull. The 11/16 in, or 17 mm, width defines how much flat area at the edge is covered, which helps when choosing door styles that leave enough surface for the pull to sit fully on the face. Projection of 1-9/16 in, or 40 mm, gives enough clearance for an easy grasp while keeping the pull low-profile so it does not visually dominate the cabinet fronts. The 9-3/4 in total length offers a long grip path, which benefits wider drawers where users might pull from different points along the edge. As part of the Aloft collection, this consistent geometry helps multiple pulls line up cleanly across aligned cabinet rows.
The pull has a 6-9/16 in, or 167 mm, center-to-center, a 9-3/4 in length, 11/16 in width, and a 1-9/16 in projection, which define drilling layout and hand clearance.
The 167 mm center-to-center spacing sets fixed hole positions, so jigs and boring patterns can be aligned for uniform placement across multiple cabinets.
The pull is made from aluminum, which provides a metal feel while keeping overall hardware weight lower on cabinet doors and drawers.
The pull has a polished chrome finish, giving it a bright, reflective surface that pairs with other polished chrome decorative hardware.
The pull projects 1-9/16 in, or 40 mm, from the cabinet face, providing room for fingers while maintaining a low-profile appearance.
This pull is part of the Amerock Aloft collection, so its profile and proportions coordinate with other Aloft decorative hardware pieces.
The Amerock Aloft edge pull with 6-9/16 in, or 167 mm, center-to-center spacing offers defined dimensions that support accurate cabinet drilling and alignment. Its aluminum construction and polished chrome finish deliver a contemporary look that ties into other metal elements across a project. The 9-3/4 in overall length and 1-9/16 in projection establish a comfortable grip area along doors and drawers. For cabinet runs built around the Aloft collection geometry and polished chrome hardware, this Amerock BP3674526 pull provides a consistent, measurable option ready for layout-driven work.
Sold In: 1 Each
