Amerock Extent tab pull gives cabinets a low-profile grip using a 6-9/16 in (167 mm) center-to-center layout, which spreads the load across the door or drawer front and supports consistent alignment on multi-pull runs. The pull uses an aluminum body, keeping weight down while providing a solid metal feel at the edge of the front. A polished chrome finish reflects surrounding surfaces, which helps the pull visually tie into other chrome decorative hardware in the same space. The profile projects 1-5/8 in from the mounting surface, giving fingers room to grab without forcing deep recess cuts in the cabinet. A 13/16 in width concentrates the visual line along the edge, which suits modern fronts where a slim pull is preferred. Overall length at 9-3/4 in spans wider fronts, helping distribute opening forces along more of the panel.
This Amerock Extent Series tab pull uses a defined 6-9/16 in (167 mm) center-to-center hole spacing, so layouts can be transferred directly from shop templates or CNC drilling patterns to the cabinet fronts. The 9-3/4 in overall length means the pull overhangs beyond the mounting holes on both sides, giving a balanced look when centered on the panel. With a 1-5/8 in projection, the grip stands off the face enough for fingers to catch the edge without crowding adjacent doors or walls in typical cabinet layouts. The 13/16 in width keeps the metal band tight to the edge, which helps the pull sit comfortably on narrow rails while still being visible and functional in daily use.
The Amerock BP3675226 pull, from the Extent Collection, suits cabinet doors and drawers that benefit from a slim edge-mounted grip with a defined 6-9/16 in (167 mm) center-to-center pattern. Because the pull runs 9-3/4 in in overall length, it visually matches mid-size to wider fronts, helping maintain proportion on kitchen, bath, or shop cabinets using similar door widths. Aluminum material makes the pull a practical option when many units are mounted on large installations, since it limits added load on hinges and drawer slides. The polished chrome finish coordinates with polished chrome decorative hardware, so hinges, knobs, and other pulls in the same finish can be used together without visual conflict on the project.
The defined 6-9/16 in center-to-center spacing lets fabricators build drilling jigs or program machinery once, then repeat that pattern across a full job with predictable results. The 9-3/4 in overall length ensures the pull extends past the fastener points, which spreads the gripping area and reduces concentrated stress at a single spot on the panel. With a 1-5/8 in projection off the surface, the pull offers clearance that supports comfortable hand access while still reading as a low-profile tab rather than a bulky bar. The 13/16 in width gives enough surface area at the edge for a steady feel when pulling, yet stays narrow enough to maintain a clean, streamlined profile that aligns with modern cabinet designs.
The Amerock BP3675226 pull has a 6-9/16 in center-to-center, 9-3/4 in overall length, 1-5/8 in projection, and 13/16 in width, which together define drilling layout and clearance.
The 6-9/16 in center-to-center spacing gives a fixed drilling pattern, so jigs or templates can be reused across multiple doors and drawers for consistent alignment.
The Amerock Extent Series BP3675226 pull is made from aluminum, which keeps weight down while still providing a metal grip surface on the cabinet front.
The Amerock Extent tab pull uses a polished chrome finish, allowing it to coordinate with other polished chrome decorative hardware on the same project.
The pull projects 1-5/8 in from the mounting surface, which sets hand clearance and helps the pull function as a low-profile edge grip.
The Amerock Extent BP3675226 pull is 13/16 in wide, creating a slim metal band at the cabinet edge that supports a streamlined appearance.
The Amerock Extent Series BP3675226 tab pull combines a 6-9/16 in (167 mm) center-to-center pattern with a 9-3/4 in overall length, giving installers a predictable drilling layout and a long, usable grip. Aluminum construction with a polished chrome finish ties into existing polished chrome decorative hardware while keeping added weight modest across a run of cabinets. With 1-5/8 in projection and 13/16 in width, the pull delivers a slim, functional profile at the edge of doors and drawers, ready to integrate into cabinet projects that call for a clean, linear tab pull.
Sold In: 1 Each
