Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Extent edge pull gives cabinets a low-profile tab grip using a 4-3/16 in (106 mm) center-to-center layout, so installers get a predictable hole pattern for repeatable runs across doors and drawers. The pull uses Amerock Extent Series styling, which keeps the look consistent wherever the line is specified. Aluminum construction keeps the piece light while still providing a solid grasp point across the 5-13/16 in overall length, which helps when aligning multiple pulls by eye. A polished nickel finish reflects surrounding surfaces, so the pull visually ties in with other polished nickel decorative hardware on the job. The 1-5/8 in projection sets the front edge away from the cabinet face, creating comfortable finger clearance. A 13/16 in width keeps the tab visually slim while still giving enough surface area to grab, which supports controlled opening on heavier fronts.
The 4-3/16 in (106 mm) center-to-center drilling dimension defines exactly where to place mounting holes, which supports tight alignment from cabinet to cabinet. With a total length of 5-13/16 in, the Amerock Extent edge pull spans more of the door or drawer edge, making it easier to visually center the hardware on wider fronts. The 1-5/8 in projection positions the gripping edge forward from the face, which helps fingers catch the pull without scraping along the cabinet surface. A 13/16 in width keeps the tab compact, so installers can set pulls close to adjacent doors while retaining a comfortable contact area for opening.
The Amerock Extent Series 4-3/16 in (106 mm) center-to-center polished nickel tab pull suits cabinet layouts that call for a modern edge-mounted grip with a consistent drilling pattern. Its 5-13/16 in overall length lets the pull sit confidently on standard and wider drawer fronts, helping the hardware read as part of the cabinet proportion instead of an undersized detail. The polished nickel finish works alongside other polished nickel decorative hardware and moldings, so the pull can be specified across kitchens, baths, or built-ins that repeat this finish. With aluminum construction, the pull contributes minimal additional weight to doors and drawers, which is useful where hardware is multiplied across large banks of fronts.
The 4-3/16 in (106 mm) center-to-center measurement on this BP36750PN tab pull ties directly to drilling jigs and layout measurements, allowing installers to run a single setup for every cabinet using this pull. The 1-5/8 in projection defines a regular hand clearance depth, so the grip feels the same from one cabinet to the next and reduces variability in user experience. A 13/16 in width stabilizes the feel of the pull under the fingers, helping users get a secure grasp even on heavier or taller fronts. The polished nickel finish presents a smooth, reflective surface that visually aligns with other polished nickel components, supporting a coordinated hardware schedule on professional jobs. Aluminum as the base material keeps the pull rigid while limiting overall mass, which contributes to a precise feel when fronts are opened and closed repeatedly.
The Amerock Extent edge pull has a 4-3/16 in (106 mm) center-to-center dimension, giving a fixed drilling spread that simplifies layout and keeps hole locations consistent on multiple cabinets.
The BP36750PN tab pull measures 5-13/16 in in overall length, so it visually spans more of the cabinet edge and centers cleanly on standard and wider drawer or door fronts.
This polished nickel pull projects 1-5/8 in from the mounting surface, establishing consistent finger clearance and helping users catch the pull comfortably without scraping the cabinet face.
The Amerock Extent Series tab pull is 13/16 in wide, creating a slim profile that keeps the hardware discreet while maintaining enough surface for a controlled fingertip grip.
The Extent edge pull is made from aluminum, which keeps the pull lightweight while still providing a rigid gripping surface across its full length.
This Amerock Extent pull has a polished nickel finish, allowing it to coordinate visually with other polished nickel decorative hardware used on the same project.
The Amerock Extent edge pull BP36750PN combines a 4-3/16 in (106 mm) center-to-center layout with a 5-13/16 in overall length, giving clear drilling and visual proportions for professional cabinet runs. With aluminum construction, a 1-5/8 in projection, 13/16 in width, and a polished nickel finish, this tab pull supports consistent alignment, comfortable grip, and coordination with other polished nickel decorative hardware. Use these confirmed dimensions and finish details to match this pull to your cabinet fronts and extend the Extent Series look across your project.
Sold In: 1 Each
