Amerock Extent edge pull is a tab-style cabinet pull designed to give doors and drawers a clean, modern grip point using a slim profile. The pull is part of the Amerock Extent collection, so it follows a consistent design language for projects using this series. Its 4-3/16 inch (106 mm) center-to-center drilling sets a clear layout standard across a run of fronts, which helps keep alignment consistent on banks of cabinets. The satin nickel finish provides a neutral metal tone that works with many hinge and knob finishes from the same material family. An overall length of 5-13/16 inches creates a visual border beyond the fastener spread, which can help with hand clearance on larger drawer fronts. A 1-5/8 inch projection gives enough space to grip without extending excessively into walkways. The 13/16 inch width concentrates the pull into a narrow band for a minimal look while still providing tactile surface.
The BP36750G10 Amerock pull uses a 4-3/16 inch (106 mm) center-to-center hole pattern, so drilling must match this spread for the pull to sit correctly. Its projection of 1-5/8 inches tells you how far the grip edge stands out from the cabinet face, which can be important when working near adjacent walls or appliances. With a 13/16 inch width, the pull occupies a narrow strip along the edge of the door or drawer, leaving more visible panel surface for the finish material. The 5-13/16 inch overall length also means the pull will extend past the mounting points, which can help distribute visual weight on wider drawer fronts and balance multiple pulls in a bank.
This Amerock Extent tab pull is categorized under handles and pulls for decorative hardware and moldings, positioning it for use on cabinet doors and drawers in woodworking projects. The aluminum construction suits typical interior cabinet environments where a metal pull is desired on wood or composite fronts. Because it is part of the Amerock Extent Series, the pull can be used wherever a consistent linear tab style is needed across multiple cabinets, such as kitchen runs, bath vanities, or built-ins. The 4-3/16 inch (106 mm) center-to-center size fits layouts designed around that drilling pattern, letting installers repeat the same spacing on each front for a uniform grid. Its satin nickel finish gives a muted metallic appearance that ties in with other satin nickel handles, allowing coordinated hardware across a room without mixing finishes.
The precise 4-3/16 inch (106 mm) center-to-center measurement provides a repeatable reference when setting up jigs or drilling templates, which can reduce layout time and help keep rows of pulls straight. The 5-13/16 inch overall length creates predictable coverage on the edge of the panel, helpful when aligning the pull relative to door or drawer corners to achieve consistent reveals. The 1-5/8 inch projection defines how far the hand grip stands away from the face, which affects how fronts open when used near tall doors or stacked drawers. At 13/16 inch wide, the pull concentrates its contact area so that each installed piece has the same slim visual band, supporting a uniform minimal look. The manufacturer part number BP36750G10 uniquely identifies this satin nickel, 106 mm Extent edge pull, which is useful for specifying exact replacements or matching additional pulls on expansion work.
The Amerock Extent edge pull has a 4-3/16 inch (106 mm) center-to-center measurement, which sets the required hole spacing for cabinet door or drawer mounting.
The BP36750G10 Extent pull has a 5-13/16 inch overall length, so it extends beyond the mounting holes to give a longer gripping edge along the cabinet front.
This satin nickel tab pull is made from aluminum, providing a metal gripping surface while keeping each pull relatively light for cabinet installations.
The Amerock Extent edge pull has a 1-5/8 inch projection, indicating how far it stands off the cabinet surface for hand clearance and door operation.
The BP36750G10 Extent pull has a satin nickel finish, which offers a soft metallic look that coordinates with other satin nickel cabinet hardware.
The Amerock Extent Series edge pull has a width of 13/16 inch, creating a slim tab profile along the cabinet edge while still offering a defined gripping surface.
This Amerock Extent edge pull combines a 4-3/16 inch (106 mm) center-to-center layout, satin nickel finish, and aluminum construction for cabinet projects that need a slim tab profile. The defined projection, width, and overall length give clear planning dimensions, helping installers and fabricators align drilling, layout, and visual balance across doors and drawers when selecting hardware for new work or matching existing Extent Series installations.
Sold In: 1 Each
