Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Extent edge pull is an aluminum tab pull designed to give cabinets a streamlined, modern grip point along the door or drawer edge. The 8-9/16 in (217 mm) center-to-center dimension sets consistent screw spacing, which helps line up multiple pulls across a run of doors or drawers. The 11-11/16 in overall length provides a long finger grab area, useful on wider drawers where hands may approach from different spots. A projection of 1-5/8 in creates clearance for fingers to hook behind the pull, which reduces fumbling when opening heavier fronts. The 13/16 in width keeps the pull visually slim while still presenting a defined edge to grab. The polished nickel finish reflects surrounding light, so the pull reads as a crisp, bright detail against many cabinet finishes. As part of the Extent collection, this piece helps create a unified look when the same style is used throughout a project.
The 8-9/16 in (217 mm) center-to-center spacing on this Amerock Extent edge pull sets a precise drilling pattern, which supports accurate jig setup and faster production work. With a projection of 1-5/8 in, the pull stands off the cabinet face enough to clear fingers even when doors sit flush, helping reduce knuckle contact with the surface. The 13/16 in width defines how far onto the door or drawer edge the pull presents, guiding layout along the top or side edge for an even reveal. The 11-11/16 in overall length is useful when aligning multiple pulls, because the ends can be referenced visually to keep hardware in straight, parallel lines. Together, these dimensions help translate drawings into installed hardware that looks straight and feels comfortable in regular operation.
The Amerock Extent Series BP36753PN tab pull, with its 8-9/16 in center-to-center size, suits medium to large cabinet doors and drawers where a longer grip is preferred. The 11-11/16 in length matches well with wider fronts, because the pull spans more of the edge and presents a clear hand target across the face. Its polished nickel finish ties visually into other polished nickel decorative hardware, which helps when coordinating handles and pulls across a kitchen or bath. The aluminum construction keeps overall hardware weight low on each front, which is helpful when working with large doors or wide drawers that already carry significant load from contents and fronts.
The defined 8-9/16 in (217 mm) center-to-center measurement on this Amerock Extent edge pull allows installers to base drilling templates on a single fixed dimension, which saves layout time across multiple identical cabinets. Because the projection is set at 1-5/8 in, the installer can anticipate how far the pull will stand off the face, which aids in planning clearances near adjacent walls, appliances, or other hardware. The 13/16 in width and 11-11/16 in overall length give predictable proportions, so when several pulls are aligned along a tall pantry or a bank of drawers, the visual rhythm stays consistent from piece to piece. As part of the Extent collection, repeating this BP36753PN pull across a project builds a uniform hardware line, which helps designs move smoothly from drawings to installed cabinetry without rethinking measurements for each opening.
The Amerock Extent BP36753PN pull has 8-9/16 in center-to-center hole spacing, 11-11/16 in overall length, 1-5/8 in projection, and 13/16 in width, which define drilling layout and hand clearance.
The 8-9/16 in center-to-center spacing provides a fixed drilling dimension, supporting repeatable hole placement across multiple doors or drawers in a cabinet run.
The aluminum construction of this Amerock Extent edge pull keeps the hardware light while still offering a solid grip area, which is useful on larger or heavier cabinet fronts.
A 1-5/8 in projection sets the pull off the cabinet face so fingers can hook behind it more easily, supporting a comfortable grip when opening doors and drawers.
The polished nickel finish gives the pull a bright, reflective surface that visually coordinates with other polished nickel decorative hardware in the same room.
The 11-11/16 in length spans more of a wide drawer edge, offering a larger target area for hands and helping the hardware stay visually proportionate to the front.
The Amerock Extent edge pull BP36753PN pairs an 8-9/16 in center-to-center layout with 11-11/16 in overall length, giving installers predictable drilling and a generous grip span. Its aluminum construction and 1-5/8 in projection support everyday use on cabinet doors and drawers, while the polished nickel finish coordinates with other nickel hardware details on the project. For runs of medium to large fronts where a consistent, modern tab pull is needed, this Extent piece offers defined dimensions that translate directly into clean alignment across the job.
Sold In: 1 Each
