Amerock Extent edge pull is an aluminum tab pull in the Extent collection that provides a low-profile way to operate doors or drawers, which helps when a clean front is important on cabinet runs and furniture pieces. The polished chrome finish reflects surrounding surfaces, so the pull visually matches other polished chrome cabinet hardware in the same space. The 4-9/16 in (116 mm) center-to-center drilling matches common metric layouts, which supports straightforward layout on cabinet fronts during new work or refacing. Overall length of 7-3/4 in gives hand contact along more of the edge, which can feel more secure on wider drawers. Projection of 1-5/8 in creates space for the fingers behind the tab, improving grip without pulling the front too far out from the cabinet line. A width of 13/16 in gives a slim look at the edge while still covering the drilling area.
The 4-9/16 in (116 mm) center-to-center layout defines the drilling pattern, so installers can mark this span along the cabinet edge and know the pull will align correctly on multiple fronts. The 7-3/4 in overall length affects where the pull ends land relative to the cabinet width, which helps with visual balance when repeating this piece across a bank of doors or drawers. A 1-5/8 in projection sets how far the tab stands off the front, which influences finger room and clearance near adjacent walls or appliances. The 13/16 in width determines how much of the edge face is covered, which can help conceal the drilled holes while keeping the metal edge line tight. Using these dimensions together supports repeatable layouts from one cabinet run to the next.
The Extent series identity ties this pull to other Amerock decorative hardware in the same collection, which lets builders carry a single design language through kitchens, baths, or built-ins. Its 4-9/16 in (116 mm) center-to-center drilling lines up with cabinets laid out on that metric spacing, which is common in many modern casework systems. The polished chrome finish coordinates with polished chrome faucets, hinges, and other fittings, which is useful when aligning finishes across an entire room. With an overall 7-3/4 in length and slim 13/16 in width, the pull suits medium to wider drawer fronts where a longer linear pull looks proportional, helping projects maintain consistent visual rhythm across multiple fronts.
The 4-9/16 in (116 mm) center-to-center measurement means once jigs or drilling templates are set to that span, installers can repeat the pattern across many cabinets, saving layout time and reducing rework. The 1-5/8 in projection defines the stand-off from the front, which affects user comfort when grasping the edge and can reduce fingertip contact with the cabinet surface over time. Aluminum construction keeps each pull relatively light for its 7-3/4 in length, which can be an advantage on thin or lightweight drawer fronts that do not need additional load. The polished chrome finish on the aluminum body creates a bright, reflective surface that visually pairs with other polished chrome decorative hardware, helping projects reach a coordinated finish schedule without mixing unrelated looks.
The Amerock Extent edge pull has a 4-9/16 in (116 mm) center-to-center dimension, which sets the drilling span used to align the mounting holes on cabinet doors or drawers.
The Amerock BP3675126 pull measures 7-3/4 in in overall length, giving a longer gripping area that works well across medium or wider drawer and door fronts.
This Extent series tab pull projects 1-5/8 in from the mounting surface, providing space for fingers behind the pull while keeping the hardware relatively low profile.
This cabinet pull is made from aluminum with a polished chrome finish, combining a lighter-weight body with a bright, reflective surface that matches polished chrome hardware.
The Extent edge pull is 13/16 in wide, so it presents a narrow metal band at the cabinet edge while still covering the drilled mounting area.
This aluminum edge pull suits cabinet or furniture fronts that use a 4-9/16 in (116 mm) center-to-center drilling and call for a polished chrome, low-profile tab style.
The Amerock Extent edge pull in polished chrome brings a defined 4-9/16 in (116 mm) center-to-center layout, making it straightforward to plan consistent drilling across cabinet fronts. Its 7-3/4 in length, 1-5/8 in projection, and 13/16 in width give a slim, modern profile that still offers practical grip. The aluminum construction with polished chrome finish ties into other polished chrome decorative hardware. Choose this Amerock BP3675126 pull when a coordinated Extent series look and repeatable metric drilling pattern are priorities on the project.
Sold In: 1 Each
