Amerock Extent edge pull defines this tab-style handle as part of the Extent collection from Amerock Corporation, giving you a consistent look across projects that call for the same modern family of decorative cabinet hardware. The pull is described as an aluminum piece, so it provides a solid metal feel while keeping weight manageable when you are outfitting larger cabinet runs. A polished nickel finish is specified, which creates a bright, reflective surface that pairs well with many hinge finishes and helps doors read clean and finished on the job. The center-to-center dimension is listed as 6-9/16 in, or 167 mm, so this pull fits layouts drilled to that common spread without layout changes. Overall length is given as 9-3/4 in, which leaves material at each end of the pull beyond the fastener points, helping the handle visually anchor wider drawer fronts.
The pull features a 6-9/16 in, or 167 mm, center-to-center mounting dimension, giving you a clear drilling pattern when laying out holes on doors or drawers. The specified overall length of 9-3/4 in means the pull extends beyond the screw centers at each end, so you can plan its position in relation to panel edges and neighboring hardware. A width of 13/16 in defines how far the tab spans across the door face, which matters when you are lining it up with edge reveals or other trim details. With a projection of 1-5/8 in, the pull stands off the surface enough to allow fingers to engage the edge consistently across various door thicknesses.
The product is identified as a pull in the handles and pulls category, so it is suited to cabinet doors and drawer fronts where a graspable edge is required. Being part of the Amerock Extent collection, it works on projects where that specific series is used as the design reference, helping you line up this piece with matching pulls elsewhere in a kitchen or commercial millwork run. The 6-9/16 in, or 167 mm, center-to-center size matches drill patterns built around that spread, which is practical when replacing existing hardware already bored to this dimension. Its overall length of 9-3/4 in allows it to span a meaningful portion of wider fronts, helping the pull read in scale with larger drawers or tall doors. The 13/16 in width at the tab edge gives a defined band of metal across the surface, which matters when you want the pull to register visually without overpowering narrow fronts.
The specified 167 mm center-to-center measurement translates directly to metric-based drilling jigs, making it easier to repeat hole placement across multiple fronts with consistent results. When working in imperial, the 6-9/16 in notation provides a clear reference for tape-based layout or shop-made templates. The 1-5/8 in projection allows room for fingers behind the pull edge, which helps users grip the door reliably while also defining how far the pull will stand off in relation to adjacent fronts. Aluminum construction keeps each pull light, which can streamline handling and setup during large-scale installations with many fronts on sawhorses or benches. The polished nickel finish ties the piece visually to other polished nickel hardware on the job, so hinges and other pulls can align in color and sheen, supporting a consistent finished appearance across the entire run.
The Amerock Extent edge pull has a 6-9/16 in, or 167 mm, center-to-center dimension, so it matches drill patterns and templates set to that specific mounting spread.
The Amerock BP36752PN pull has a listed overall length of 9-3/4 in, so it stretches beyond the fastener points and suits wider cabinet doors or drawers.
The Extent Series tab pull is described as aluminum, providing a metal construction that is straightforward to handle and mount across multiple cabinet fronts.
The polished nickel edge tab pull has a projection of 1-5/8 in, giving enough clearance for fingers behind the pull while defining stand-off from the cabinet face.
The Amerock aluminum cabinet pull has a width of 13/16 in, which sets the visible band across the door edge and helps you gauge its visual presence.
The Amerock BP36752PN pull is listed as part of the Extent collection, so it aligns with other Extent pieces when building a coordinated hardware layout.
The Amerock Extent edge pull BP36752PN combines a 6-9/16 in, or 167 mm, center-to-center layout with a 9-3/4 in overall length, so it suits fronts drilled to that spread while visually spanning wider faces. Aluminum construction with a polished nickel finish delivers a defined metal look that coordinates with other polished nickel hardware in the same space. With a 13/16 in width and 1-5/8 in projection, the pull sets a clear footprint and hand clearance on cabinet doors or drawers. Use these verified dimensions and collection details to align this pull with your drilling patterns and Extent Series design intent.
Sold In: 1 Each
