Amerock Extent edge pull gives cabinets a streamlined grip point using an 8-9/16 in (217 mm) center-to-center layout, so installers can span larger drawer or door fronts with a single pull that matches modern layouts. The pull is made from aluminum, which keeps the piece light while still giving a solid feel during daily use. Its satin nickel finish creates a muted metallic look that blends with many hinge finishes for visual consistency across a project. Overall length of 11-11/16 in provides extra hand clearance beyond the mounting centers, helpful on wider drawers. A projection of 1-5/8 in sets the pull far enough off the surface for a comfortable grasp. Width of 13/16 in keeps the profile slim at the cabinet edge, supporting contemporary flat-front designs in kitchens, baths, and built-ins.
The 8-9/16 in (217 mm) center-to-center measurement on this Amerock Corporation Extent Series pull defines exact hole spacing, which supports repeatable drilling using jigs or CNC patterns. With an 11-11/16 in overall length, the pull extends past the mounting points, so installers can position the centers for structural strength while still presenting a longer grip area. A projection of 1-5/8 in determines how far the pull stands off the face, which affects door swing clearance near walls or tall panels. The 13/16 in width informs edge placement, giving enough surface area for stable seating on the door or drawer front while keeping the profile narrow for tight reveals. Material construction in aluminum keeps loads low on fasteners and substrates, useful when working on lighter cabinet fronts.
This Amerock Extent Series tab pull in satin nickel works in decorative hardware and moldings applications where a contemporary handle profile is required. The 8-9/16 in (217 mm) center-to-center dimension suits medium to wide cabinet drawers and doors, giving enough span for comfortable use on kitchen base cabinets, bathroom vanities, or storage pieces. The 11-11/16 in overall length helps the pull read correctly on larger fronts, so a single pull can serve as the main grip on wide drawers without looking undersized. Its 13/16 in width and 1-5/8 in projection create a lean stance off the cabinet edge, aligning with flat-panel or slab-style designs. The satin nickel finish supports hardware packages built around similar satin nickel hinges or knobs under the Amerock Corporation brand.
The defined 8-9/16 in (217 mm) center-to-center layout on the BP36753G10 pull allows use of standard drilling templates, which streamlines layout across large runs of cabinetry and reduces rework from misaligned holes. The 11-11/16 in overall length gives fabricators flexibility to center the pull visually while keeping the fastening points in stronger areas of the rail or stile. A 1-5/8 in projection makes it easier for users to grab the pull from different angles, which is useful on deeper drawers or on doors mounted near adjacent walls. The 13/16 in width sets a dependable bearing surface against the cabinet, helping the pull sit flat along the edge line. Aluminum construction reduces weight at each installation point, which can be important on thinner drawer fronts or lighter materials. The satin nickel finish supports consistent visual results job to job when repeating Amerock Extent cabinet hardware.
The Amerock Extent BP36753G10 pull has an 8-9/16 in center-to-center, 11-11/16 in overall length, 1-5/8 in projection, and 13/16 in width, giving installers clear layout and grip expectations.
The 8-9/16 in (217 mm) center-to-center sets exact hole spacing, supporting consistent drilling across multiple doors and drawers using jigs, fixtures, or programmed CNC patterns.
The Extent Series BP36753G10 pull is made from aluminum, which keeps the hardware relatively light on the door or drawer front while still providing a solid-feeling grip point.
This Amerock Extent edge pull has a satin nickel finish, giving a muted metallic look that pairs well with satin nickel hinges and other decorative cabinet hardware.
The Amerock BP36753G10 pull measures 11-11/16 in overall, so it visually suits wider cabinet drawers and doors while still mounting on the 8-9/16 in center-to-center points.
The 1-5/8 in projection sets the pull away from the cabinet face, providing finger clearance and an easier grip on thicker doors, deep drawers, or cabinets near adjacent surfaces.
The Amerock Extent edge pull BP36753G10 combines an 8-9/16 in (217 mm) center-to-center span, 11-11/16 in length, and satin nickel finish to serve medium and wide cabinet fronts. Aluminum construction keeps each pull light on the door or drawer, useful on broad installations. With defined projection and width, this tab pull sets clear expectations for clearance and grip. When a project calls for a contemporary satin nickel tab pull with these dimensions, this Amerock Extent piece is designed to match that layout and appearance.
Sold In: 1 Each
