Amerock Extent Series 4-9/16 in (116 mm) Center to Center Polished Nickel Tab Pull, -BP36751PN

Amerock Extent Edge Pull For Clean Cabinet Lines

Amerock Extent edge pull is a tab-style cabinet pull from Amerock Corporation designed for a modern, low-profile grip on cabinet fronts. The pull uses a 4-9/16 in (116 mm) center-to-center dimension, which sets accurate drilling spacing when you are laying out multiple doors or drawers in a run. Its aluminum construction creates a solid, lightweight pull that is straightforward to handle during installation and consistent across a larger project. The polished nickel finish provides a bright, reflective surface that pairs with many hinge finishes and appliances in kitchens or casework. With a length of 7-3/4 in, the pull extends slightly past the mounting points, giving more finger surface while keeping a streamlined edge look. A 1-5/8 in projection defines how far the pull stands off the face, which affects clearance when opening doors next to walls or tall panels.

Key Extent Edge Pull Details For Projects

• The 4-9/16 in (116 mm) center-to-center layout sets repeatable hole spacing, helping keep handles aligned across cabinet rows and simplifying jig setup.
• The 7-3/4 in overall length spreads the pull visually across the cabinet edge, which helps longer fronts look balanced and reduces crowded hardware placement.
• The 1-5/8 in projection gives enough stand-off for fingers behind the pull while limiting how far it reaches into walkways, useful on tight galley runs.
• The 13/16 in width defines a slim tab profile, letting the pull sit neatly on door or drawer edges without dominating narrow rail sections.
• The polished nickel finish offers a bright metallic appearance that coordinates with many contemporary fixtures, helping one hardware style carry through an entire room.
• The aluminum material keeps each pull light yet rigid, which is helpful when installing multiples on large cabinet banks or tall pantry fronts.

Installation Dimensions That Guide Mounting Work

The 4-9/16 in (116 mm) center-to-center dimension on this Amerock aluminum cabinet pull sets the exact distance between fastener holes, which drives your drilling template or CNC program. Its 7-3/4 in overall length means the pull extends beyond those mounting points, so you can position it confidently near door corners without losing hand clearance. A 1-5/8 in projection defines how far the working edge stands off the face, which matters when cabinets open beside walls or appliances. The 13/16 in width gives a compact mounting footprint, leaving plenty of material around the holes on narrow rails or thin drawer fronts.

Using This BP36751PN Tab Pull In Real Projects

Where The Amerock Extent Series Pull Fits Best

This Amerock Extent series pull sits in the Decorative Hardware & Moldings category under Handles and Pulls, so it is suited for cabinet doors and drawers in woodworking projects. The 116 mm center-to-center measurement aligns well with common metric layouts on European-style cabinetry, allowing the pull to integrate into existing drilling patterns. Its tab form is designed to register along an edge, which lets you run a clean hardware line across upper and base cabinets. With a 7-3/4 in length, the pull works on both standard door widths and medium-size drawer fronts, keeping proportions consistent across a kitchen or built-in. The aluminum material fits well in shop-built casework where weight and ease of handling matter during hanging and adjustment.

Why These Extent Edge Pull Specs Support Consistent Results

The 4-9/16 in (116 mm) center-to-center spec on the BP36751PN tab pull gives an exact drilling reference, which supports fast repetition whether you use a drill guide or line boring equipment. The 1-5/8 in projection keeps the gripping surface away from the cabinet face, which reduces finger scraping and gives better leverage when opening heavier drawers. Its 13/16 in width concentrates load along a narrow strip, which can help maintain a crisp visual line on slab fronts without visually widening the rail. The polished nickel finish on the Amerock Extent edge pull provides a consistent reflective look, which helps doors and drawers read as one coordinated set when light hits the hardware. Aluminum construction keeps each pull lighter than many solid-cast options, which can ease alignment when you are working alone on tall stacks or oversized fronts.

Common Questions About This Amerock Extent Pull

Selecting This Pull For Cabinet Edge Layouts

The Amerock Extent edge pull in polished nickel combines a 4-9/16 in (116 mm) center-to-center layout with a 7-3/4 in length, giving a clear drilling reference and generous grip area on cabinet fronts. Its 1-5/8 in projection and 13/16 in width define a compact, usable tab shape that suits modern casework. With aluminum construction and a reflective polished nickel finish, this BP36751PN tab pull aligns with decorative cabinet hardware needs where consistent sizing and coordinated appearance matter.