Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Extent edge pull gives a low-profile grip that mounts at the cabinet edge, so doors and drawers open with a slim, modern tab instead of a bulky handle. The 4-9/16 in (116 mm) center-to-center layout sets consistent hole spacing across a run of fronts, which helps installers line up multiple pulls quickly on site. Aluminum construction keeps the pull light while still providing a solid feel for repeated daily use on cabinet and furniture projects. The satin nickel finish brings a neutral metallic look that coordinates with many hinges and other decorative hardware in the same tone. A 7-3/4 in overall length stretches the visual line beyond the mounting span, which can help visually balance wider drawer fronts. The 13/16 in width keeps the pull discreet, while the 1-5/8 in projection gives enough finger clearance for a comfortable grip.
The 4-9/16 in center-to-center measurement on this Amerock cabinet edge pull defines the distance between mounting holes, which lets installers mark and drill consistently for a straight, aligned hardware line. With an overall length of 7-3/4 in, there is extra metal extending past the screw locations, so the pull can visually center on wider fronts while the mounting pattern stays standard. The 1-5/8 in projection controls how far the pull stands proud of the face, influencing how doors clear adjacent faces when opened. A 13/16 in width keeps the mounting footprint compact at the edge, which can help when working on narrower rails or thinner drawer headers. The M4 x 1/2 in screw size matches the threaded mounting points in the pull, which affects the pilot hole size and thread engagement during installation.
The Amerock Extent series 4-9/16 in center-to-center satin nickel tab pull fits cabinet and furniture applications where a slim edge pull is preferred over a full-depth handle. The satin nickel finish supports use in kitchens, baths, and built-ins that already use satin nickel cabinet hardware, keeping a unified metal tone across doors and drawers. With a 7-3/4 in overall length, this pull works well on medium to wider drawer fronts, as the longer bar visually bridges more of the panel. The aluminum construction keeps overall weight modest, which can suit large banks of wall cabinets where many pulls are installed. A projection of 1-5/8 in helps on doors near walls or appliances, as the tab offers space for fingers while remaining relatively close to the surface.
The 4-9/16 in center-to-center specification on the BP36751G10 tab pull lets installers repeat a single drilling setup across an entire job, which saves time when laying out multiple fronts. The consistent 13/16 in width and 1-5/8 in projection give predictable clearance, so spacing from adjacent doors and drawer heads can be planned without constant re-measurement. Using M4 x 1/2 in screws with the matching threaded mount simplifies hardware selection during cabinet assembly, because the screw diameter and length are already defined by the pull design. The 7-3/4 in overall length provides a known edge-to-edge dimension, helping align the pull relative to panel edges or centerlines for a uniform appearance. The satin nickel finish used on this aluminum pull maintains the same look pull-to-pull, which supports a consistent finish line through a full room installation.
The BP36751G10 is an Amerock Extent series edge-style tab pull, which provides a slim gripping point mounted at the cabinet edge for doors and drawers.
This Amerock cabinet edge pull has a 4-9/16 in (116 mm) center-to-center dimension, which sets the hole spacing for drilling and alignment across multiple fronts.
The Amerock Extent edge pull measures 7-3/4 in overall length, so it visually spans a larger portion of the door or drawer front than the mounting centers alone.
This tab pull is made from aluminum with a satin nickel finish, giving a light metal body with a soft, neutral metallic appearance on cabinet fronts.
The pull projects 1-5/8 in from the surface and is 13/16 in wide, which provides finger clearance while keeping a narrow profile at the cabinet edge.
The BP36751G10 is specified with M4 x 1/2 in screws, so the threaded holes in the pull are sized for metric M4 fasteners at that length.
The Amerock Extent edge pull with 4-9/16 in (116 mm) center-to-center spacing and 7-3/4 in overall length offers a defined drilling pattern and proportion for cabinet projects. With aluminum construction, satin nickel finish, 1-5/8 in projection, and 13/16 in width, it supports slim, modern edge gripping points across doors and drawers. Selecting the BP36751G10 tab pull keeps center-to-center dimensions, finish tone, and profile consistent throughout a run of cabinetry, which helps deliver a unified look on completed installations.
Sold In: 1 Each
