
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Allison Value Series pull gives you a 5-1/16 in (128 mm) center-to-center layout, which aligns with common drilling patterns so existing cabinet or drawer holes can often be reused for straightforward changeouts. The pull measures 5-7/8 in (149 mm) overall length, so it spans the stile cleanly while leaving enough finger clearance around neighboring doors. A 1-1/8 in (29 mm) projection sets the hand away from the door face, providing practical grip space without sticking out excessively into walkways. The 3/16 in (5 mm) width keeps the profile slim, which helps it sit visually light on face frames and slab fronts. Flat Black finish establishes a dark, uniform appearance that reads modern or transitional on both light and dark surfaces. Zinc construction provides a solid-feeling handle body for repeated door and drawer use in residential or commercial settings.
This Everyday Heritage pull is specified at 5-1/16 in (128 mm) center-to-center, so hole placement is defined from the start of layout through final install. Base pads measure 9/16 in (14 mm) in length and 1/4 in (6 mm) in width, giving a small footprint at each mounting point that seats neatly on cabinet faces. That compact base helps when working near narrow rails or stile edges. The flat black finish runs across the full 5-7/8 in (149 mm) length and 1-1/8 in (29 mm) projection, presenting a consistent edge line when several pulls are installed in a row. Zinc construction carries that profile without flex, which supports firm fastening on both doors and drawers.
The Everyday Heritage pull 128mm center dimension pairs well with both residential and commercial applications named for this series, so runs of doors in kitchens, offices, or break areas can share the same handle layout. The 5-7/8 in (149 mm) overall length spans wider drawer fronts cleanly, yet still suits narrower cabinet doors because the 3/16 in (5 mm) width keeps the profile light. A 1-1/8 in (29 mm) projection creates a defined hand space that helps when door overlays or applied panels add thickness, giving enough clearance between fingers and the front. Flat Black finish offers a neutral, dark tone that works across painted, laminated, or stained surfaces by creating a clear outline around the handle. Zinc material supports this extended use by forming a solid pull body that responds consistently as drawers and doors are opened throughout the day.
This Amerock decorative cabinet pull uses the 5-1/16 in (128 mm) center-to-center layout to keep drilling or redrilling consistent from cabinet to cabinet, which simplifies setting up jigs or repetitive drilling patterns. The compact 9/16 in (14 mm) by 1/4 in (6 mm) base size concentrates contact at each end, helping the pull seat flat against the surface for a uniform look. With a 3/16 in (5 mm) bar width carried across the 5-7/8 in (149 mm) length, the pull establishes a continuous straight line that aligns neatly along drawer tops. The 1-1/8 in (29 mm) projection works as a standard reach distance, which supports predictable clearances relative to adjacent cabinets or appliance fronts. Flat Black finish maintains a uniform appearance across all these dimensions, which helps multiple pulls present as a coordinated set on large runs.
The Amerock BP1214FB pull has a 5-1/16 in (128 mm) center-to-center dimension, which sets a consistent hole spread for cabinet and drawer layouts.
The pull length is 5-7/8 in (149 mm), so it extends slightly beyond the mounting holes for a balanced look on doors and drawers.
The BP1214FB pull projects 1-1/8 in (29 mm) from the mounting surface, providing functional hand clearance in front of cabinet faces.
The Everyday Heritage pull uses zinc material, giving a solid handle body suitable for repeated opening and closing of doors and drawers.
This Amerock cabinet pull has a flat black finish, creating a dark, even surface that pairs with many cabinet colors.
Each base measures 9/16 in (14 mm) in length and 1/4 in (6 mm) in width, providing a compact footprint on the cabinet surface.
The Amerock Allison Value Series pull in the Everyday Heritage line brings a 5-1/16 in (128 mm) center-to-center layout, 5-7/8 in (149 mm) overall length, and 1-1/8 in (29 mm) projection together in a flat black zinc design suited to residential or commercial cabinets. These defined dimensions, along with the 3/16 in (5 mm) width and compact base pads, give you a clear set of measurements to match across doors and drawers. For projects built around a consistent flat black look and a common 128 mm drilling pattern, this BP1214FB pull provides a straightforward, repeatable choice.
Sold In: 1 Each