Choose a Rev-A-Shelf cutlery drawer

Rev-A-Shelf cutlery drawer is a pre-assembled wood drawer system designed to double drawer storage in an existing cabinet opening. This Rev-A-Shelf maple cutlery drawer uses a two-tier layout so flatware and kitchen tools can be separated without taking extra cabinet space. The drawer includes 90 lb full extension slides with soft-close action, and the top tier slides back inside the cabinet on ball-bearing drawer slides for layered access. This door mount drawer is made for 1-1/2 inch face frame cabinet construction only and is designed for a 21 inch cabinet with an 18 inch opening. Adjustable door mount brackets are included and required for operation, making it a practical replacement drawer box when you want to reuse your existing drawer front.

Gain more access with a wood drawer system

• Two-tier drawer layout - The Rev-A-Shelf cutlery drawer helps organize flatware and utensils in two levels so buyers can use vertical space inside one cabinet opening.
• Pre-assembled drawer box - This wood drawer system arrives assembled, which reduces install time when replacing an existing drawer.
• Maple wood construction with clear coat finish - The maple cutlery drawer provides a durable finished interior that is ready for kitchen use.
• 90 lb full-extension BLUMOTION slides with soft-close - Full extension slides and soft-close action help the drawer open fully and close smoothly.
• Top tier slides back on ball-bearing slides - The upper tray moves back inside the cabinet so buyers can reach items stored below.
• Designed for a 21 inch cabinet with an 18 inch opening - This verified sizing helps buyers match the drawer to the intended cabinet space before ordering.
• For 1-1/2 inch face frame cabinet construction only - The stated cabinet requirement helps installers confirm whether this drawer system fits the cabinet style on site.
• Adjustable door mount brackets included and required - The included hardware supports attachment of the existing cabinet drawer front for proper operation.
• Existing drawer front attaches to the unit - This replacement drawer box lets buyers keep the current cabinet look while upgrading the inside storage layout.

Confirm fit for your face frame cabinet

Key specs to confirm: This soft-close cutlery drawer is designed for a 21 inch cabinet with an 18 inch opening and for 1-1/2 inch face frame cabinet construction only. Buyers should confirm the cabinet opening width, the cabinet construction style, and whether the existing drawer front can be attached to a door mount drawer with the included adjustable brackets. The product data confirms maple wood construction, a clear coat finish, two-tier storage, and 90 lb full extension BLUMOTION slides with soft-close. If you need exact height, depth, or detailed clearance requirements, those should be confirmed with the manufacturer or technical documentation before ordering. Any compliance, load use beyond the stated slide rating, or other technical requirements should also be confirmed there.

What's included: Verified included items are the pre-assembled maple drawer box, 90 lb full extension BLUMOTION slides with soft-close, top-tier ball-bearing slides, and adjustable door mount brackets. The unit is intended to replace an existing drawer, and the buyer attaches their own existing cabinet drawer front.

What to verify before ordering: Confirm your cabinet is a 21 inch cabinet with an 18 inch opening, confirm 1-1/2 inch face frame construction, check that your drawer front can be reused, and review cabinet interior clearances so the two-tier drawer and sliding top tray can operate correctly.

Use a two-tier cutlery drawer well

Use a maple cutlery drawer daily

A two-tier cutlery drawer fits buyers who want more organized storage without rebuilding the cabinet box. In many kitchens, the main drawer near the dishwasher or prep area becomes crowded with flatware, serving pieces, and small tools. A standard single drawer often forces users to stack items or spread them across multiple cabinets. This Rev-A-Shelf cutlery drawer addresses that problem by using two levels inside one opening. The upper tier slides back on ball-bearing drawer slides, which gives access to the lower section when needed.

This setup is useful for remodel work, service replacements, and cabinet upgrades where the exterior drawer front should stay consistent with the rest of the kitchen. Because the unit is pre-assembled, installers can focus on confirming fit, mounting the slides, and attaching the existing drawer front. The included adjustable brackets are required for operation, so this is not just a drop-in tray. It is a door mount drawer system designed to work as part of the cabinet front.

The maple wood construction with a clear coat finish also matters for buyers who want a finished wood interior rather than a bare utility insert. The soft-close cutlery drawer uses 90 lb full extension slides with BLUMOTION, which helps the drawer extend fully and close in a controlled way. For busy kitchens, that can improve access and reduce the abrupt closing common with basic drawer hardware.

The main fit issue is cabinet compatibility. This wood drawer system is for 1-1/2 inch face frame cabinet construction only and is designed for a 21 inch cabinet with an 18 inch opening. If your cabinet style, opening, or interior clearances differ, confirm those details before purchase. If you are planning a replacement drawer box for a cabinet with a different frame style or if you need exact dimensional drawings, review manufacturer documentation first.

Compare this wood drawer system confidently

When buyers compare a wood drawer system like this one with more basic drawer organizers, the main difference is that this product replaces the existing drawer box rather than sitting loosely inside it. That matters for long-term use, front attachment, and access to both tiers. A pre-assembled Rev-A-Shelf cutlery drawer is built as a cabinet component, not just a removable insert.

Another practical difference is the included slide package. Verified product data states that this unit includes 90 lb full extension BLUMOTION slides with soft-close, plus ball-bearing slides for the top tier. That combination supports layered access and a controlled closing motion. Buyers looking at simpler organizers may not get that integrated slide function or the same door mount arrangement.

Material and install style also affect the buying decision. This maple cutlery drawer is fully assembled and finished with a clear coat, which can help maintain a consistent cabinet interior appearance. It is also designed specifically for a defined cabinet application: a 21 inch cabinet with an 18 inch opening and 1-1/2 inch face frame construction. That clear fit guidance helps buyers screen the product for compatibility before ordering.

For installers and serious DIY buyers, the value is in matching the product type to the cabinet job. If the project needs a two-tier cutlery drawer that reuses the existing drawer front and mounts with included adjustable brackets, this product aligns with that use case. If the cabinet construction or opening differs, the safer path is to confirm dimensions and installation requirements before purchase rather than assuming interchangeability.

Ask fit questions before drawer install

Order the right soft-close cutlery drawer

Soft-close cutlery drawer selection starts with fit. This Rev-A-Shelf wood drawer system includes the pre-assembled maple drawer box, full extension BLUMOTION slides, top-tier ball-bearing slides, and adjustable door mount brackets needed for operation. Before purchase, confirm that your cabinet is a 21 inch cabinet with an 18 inch opening, that it uses 1-1/2 inch face frame construction, and that your existing drawer front can be attached to the unit. Those checks help avoid ordering a drawer system that does not match the cabinet application.