Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf maple cutlery drawer adds organized utensil storage to an existing cabinet drawer opening with a pre-assembled wood drawer system. This Rev-A-Shelf product is a two-tiered cutlery drawer built from natural maple with a semi-gloss finish and 5/8 inch drawer side material. It uses BLUMOTION soft-close slides and full-extension concealed slides, so the drawer opens fully and closes quietly. The sliding top tray and lower drawer provide up to seven compartments each, giving a kitchen cutlery storage drawer more usable sorting space without changing the cabinet box. The unit is designed for 15 inch, 18 inch, 21 inch, and 24 inch base cabinet drawers, and it mounts to the cabinet drawer front, rear, and side walls with Figure 8 door mount brackets.
Key specs to confirm: This door mount cutlery drawer is 19-1/2 inches wide and is designed for 15 inch, 18 inch, 21 inch, and 24 inch base cabinet drawers. Buyers should confirm the existing cabinet drawer opening, interior cabinet depth, side clearance, and drawer front sizing before ordering. The drawer uses 5/8 inch side material and installs with full-extension TANDEM concealed slides with BLUMOTION soft-close. The product description states a 110 lb. rated slide system. If any load, compliance, or installation details are critical for your project, confirm them with the manufacturer or technical documentation before purchase.
What's included: Verified information shows a pre-assembled two-tiered maple drawer box, full-extension concealed soft-close slides, and Figure 8 door mount brackets. The description states this is a complete drawer system and that the buyer adds the drawer front.
What to verify before ordering: Confirm cabinet type, opening width, required depth, drawer front compatibility, mounting points at the front, rear, and side walls, and whether your project matches the listed base cabinet drawer sizes.
A two-tiered cutlery drawer is useful when a kitchen needs more organized storage but the cabinet footprint stays the same. In many projects, a standard drawer becomes crowded with flatware, serving pieces, and small prep tools. This Rev-A-Shelf maple cutlery drawer addresses that issue by adding a sliding top tray over a lower drawer section. Both levels offer up to seven compartments, so the buyer can separate everyday cutlery from specialty utensils without mixing items together.
This product also fits buyers who want a cleaner upgrade path in an existing cabinet drawer opening. The verified description states that the drawer box comes pre-assembled and ready to install. That matters for installers trying to reduce shop time and field assembly. Instead of building a custom maple drawer organizer from raw parts, the installer can work from a ready-made wood drawer system and then add the drawer front.
The soft-close full extension drawer format also helps in routine use. Full-extension concealed slides give access to the back of the drawer, which is important when the lower tier holds longer tools or less frequently used pieces. BLUMOTION soft-close slides help control closing action and reduce abrupt shut movement. For households or workspaces where drawers open often, that can improve day-to-day function.
This product is intended for 15 inch, 18 inch, 21 inch, and 24 inch base cabinet drawers, but buyers should still confirm exact cabinet opening conditions before ordering. A base cabinet drawer insert or replacement drawer system must match the real interior space, not just the nominal cabinet size. Check width, depth, drawer front planning, and available mounting surfaces at the cabinet drawer front, rear, and side walls. If your application has unusual obstructions or nonstandard construction, confirm fit with technical documentation before installation.
When buyers compare a wood drawer system, the most useful differences are usually material, assembly status, slide type, and mounting method. This Rev-A-Shelf unit gives verified details in each of those areas. It is made from natural maple with a semi-gloss finish, arrives pre-assembled, uses full-extension TANDEM concealed slides with BLUMOTION soft-close, and mounts to the cabinet drawer front, rear, and side walls.
That combination can help buyers who want fewer unknowns during installation. A pre-assembled maple drawer organizer can reduce layout and fabrication work compared with piecing together a custom arrangement from separate organizers. A complete drawer system also helps clarify what the buyer still needs, because the verified description states to add the drawer front.
The two-tiered design is another practical point of comparison. Some organizers only divide a single drawer level. This product creates two working levels within the drawer, which may improve kitchen cutlery storage drawer capacity without expanding the cabinet. The sliding top tray keeps the upper layer usable while preserving access to the lower section.
For trade buyers and careful DIY installers, the main decision should come down to fit and mounting compatibility. Confirm the cabinet opening, the intended drawer front, and the listed base cabinet drawer size range. If your project depends on exact load use, compliance requirements, or special cabinet construction, verify those details directly with the manufacturer before ordering.
This Rev-A-Shelf cutlery drawer is designed for 15 inch, 18 inch, 21 inch, and 24 inch base cabinet drawers.
This maple cutlery drawer is listed at 19-1/2 inches wide in the verified product name.
This wood drawer system comes pre-assembled and ready to install into an existing cabinet drawer opening.
This complete drawer system requires the buyer to add the drawer front.
This door mount cutlery drawer mounts to the cabinet drawer front, rear, and side walls and uses Figure 8 door mount brackets.
This soft-close full extension drawer uses full-extension TANDEM concealed slides with BLUMOTION soft-close.
This two-tiered cutlery drawer features up to seven compartments in the drawer and up to seven compartments in the sliding top tray.
This Rev-A-Shelf drawer is made from natural maple and has a semi-gloss finish.
This base cabinet drawer insert requires checking the cabinet opening, interior depth, mounting surfaces, and planned drawer front size before ordering.
This drawer system lists TSCA Title VI compliance. Follow manufacturer installation guidance and local building requirements where applicable.
Soft-close full extension drawer performance, a pre-assembled maple box, and a two-tiered layout make this Rev-A-Shelf unit a practical choice for organized cutlery storage. Verified contents include the drawer system, concealed soft-close slides, and Figure 8 door mount brackets, while the drawer front is added separately. Before purchase, confirm your cabinet opening, the listed base cabinet drawer size range, mounting points, and drawer front plan so the installation matches your cabinet and workflow.
Sold In: 1 Each
