Rev-A-Shelf 4WTCD Series 27"W Maple Cutlery Drawer Soft-close Full extension Slides, Door Mount - 4WTCD-30HSC-1

Choose a Rev-A-Shelf cutlery drawer

Rev-A-Shelf cutlery drawer adds organized utensil storage to an existing cabinet drawer opening with a pre-assembled two-tier design. This maple cutlery drawer from Rev-A-Shelf Corporation is a wood drawer system built for kitchen cabinet drawer replacement when you want more usable space without building a drawer box from scratch. The unit includes 90 lb full extension slides with soft-close operation, and the top tier slides back inside the cabinet on ball-bearing drawer slides for access to both levels. This door mount drawer is designed for 1-1/2 inch face frame cabinet construction only, and adjustable door mount brackets are included and required for operation. The fully assembled maple wood construction has a clear coat finish for added durability.

Gain more storage with cutlery drawer

• Two-tiered drawer system - The cutlery drawer doubles up drawer space so utensils and flatware can be separated across two levels.
• Pre-assembled drawer box - The Rev-A-Shelf wood drawer system installs as a replacement for an existing drawer, which reduces assembly time on site.
• 90 lb full-extension BLUMOTION slides with soft-close - Full travel and controlled closing help the drawer open fully and close smoothly during daily kitchen use.
• Top-tier slides back inside the cabinet on ball-bearing drawer slides - The upper tray moves out of the way so the lower storage area stays accessible.
• Designed for 1-1/2 inch face frame cabinet construction only - This verified fit requirement helps buyers confirm cabinet compatibility before ordering.
• Adjustable door mount brackets included and required for operation - The included brackets support attaching the drawer front and are necessary for proper function.
• Fully assembled maple wood construction - Maple construction gives the drawer system a finished wood interior that is ready to install.
• Clear coat finish for durability - The coated maple surface helps the drawer box stand up to regular kitchen use.
• Designed for a 24 inch cabinet with a 21 inch opening - The product data provides a clear cabinet application to check before purchase.
• Simply attach your existing cabinet drawer front - The drawer system is built so the buyer can reuse the current drawer front rather than replace the visible exterior.

Confirm cutlery drawer fit and included parts

Key specs to confirm: This two-tiered cutlery drawer is described as a 27 inch wide maple unit and is designed for a 24 inch cabinet with a 21 inch opening. It is for 1-1/2 inch face frame cabinet construction only. The product data also verifies 90 lb full-extension BLUMOTION slides with soft-close and notes that the top tier slides back on ball-bearing drawer slides. Before ordering, confirm your actual cabinet opening, face frame construction, and that your existing drawer front can be attached to this door mount drawer. If you need additional dimensional details, load details beyond the stated 90 lb slide rating, or any compliance information, confirm those with the manufacturer or technical documentation.

What's included: A fully assembled maple wood drawer box, 90 lb full-extension BLUMOTION soft-close slides, top-tier slide hardware, and adjustable door mount brackets that are included and required for operation. The buyer supplies or reuses the cabinet drawer front.

What to verify before ordering: Confirm your cabinet is the correct application, including a 24 inch cabinet with a 21 inch opening and 1-1/2 inch face frame construction. Check that your existing drawer front is suitable for attachment, and verify the opening width, depth, and clearances in your cabinet before replacing the current drawer.

Compare this wood drawer system for use

Use a two-tiered cutlery drawer daily

A two-tiered cutlery drawer is a practical choice when a standard drawer is full but the cabinet still has room to organize more efficiently. In many kitchens, installers and homeowners run into the same issue: one shallow utensil drawer becomes crowded, and the lower cabinet space is not used well. This Rev-A-Shelf cutlery drawer addresses that problem with a pre-assembled drawer box that creates two storage levels inside the existing drawer opening.

For a kitchen cabinet drawer replacement project, the pre-assembled format matters. Instead of building a new insert or fabricating a custom box, the buyer gets a ready-to-install maple cutlery drawer with a clear coat finish. That can simplify planning for remodel work, service replacements, or cabinet upgrades where the goal is to improve organization while keeping the cabinet exterior consistent. The product data states that you simply attach your existing cabinet drawer front to the unit, which helps preserve the look of the kitchen.

The upper tier is not fixed in place. It slides back inside the cabinet on ball-bearing drawer slides, which allows access to the lower section. That layout can help separate everyday flatware from serving pieces, prep tools, or specialty utensils. The included 90 lb full extension slides with BLUMOTION soft-close also support a smoother travel path and controlled closing action. For buyers who use drawers heavily throughout the day, full access and soft-close movement can make the storage area easier to use.

This door mount drawer is not universal, so fit must be checked closely. The verified application is for 1-1/2 inch face frame cabinet construction only, and the web description says it is designed for a 24 inch cabinet with a 21 inch opening. If your opening, face frame, or drawer front setup differs, confirm compatibility before purchase. Buyers should also verify cabinet depth and interior clearance because the product data does not list every installation dimension.

Compare wood drawer system details carefully

When comparing a wood drawer system, the most useful differences are usually construction style, included hardware, and installation requirements. This Rev-A-Shelf unit is a fully assembled maple cutlery drawer rather than a loose organizer tray. That means it is intended to replace an existing drawer box, not just sit inside one. For buyers who want a more integrated result, that distinction is important.

Another point to compare is slide package and drawer access. This product includes full extension slides with soft-close, and the top tier has its own sliding action on ball-bearing hardware. That combination supports access to both levels of the drawer system. Some buyers may be looking at drawer organizers that do not include slide hardware or that require more field assembly. Here, the included adjustable door mount brackets are also a key part of the installation because they are required for operation.

Material and finish also affect the buying decision. The product data identifies fully assembled maple wood construction with a clear coat finish. For cabinet interiors where a finished wood look matters, that can be more appropriate than unfinished parts or non-wood organizers. At the same time, buyers should compare only verified fit information. This product is specifically described for face frame cabinet construction and a defined cabinet application. If a project uses a different cabinet style or opening size, the buyer should verify technical fit before ordering rather than assume interchangeability.

Ask fit questions before drawer install

Finish your soft-close cutlery drawer plan

Soft-close cutlery drawer projects go more smoothly when the cabinet application is confirmed before purchase. This Rev-A-Shelf wood drawer system includes the assembled maple drawer box, BLUMOTION full extension slides, and adjustable door mount brackets, while your existing drawer front attaches to the unit. Before ordering, confirm that your cabinet matches the stated face frame requirement, that the opening fits the listed application, and that your drawer front and cabinet clearances support installation. A careful fit check helps avoid replacement delays and keeps the upgrade straightforward.