Rev-A-Shelf 4WTCD Series 22-1/2"W Maple Cutlery Drawer Soft-close Full extension Slides, Door Mount - 4WTCD-572HFLSC-1

Choose a Rev-A-Shelf cutlery drawer

Rev-A-Shelf cutlery drawer adds tiered utensil storage to a frameless kitchen cabinet opening while keeping installation focused on a replacement drawer box format. This maple cutlery drawer is a pre-assembled wood drawer system made for a 24 inch frameless cabinet with a 22.5 inch opening. The Rev-A-Shelf product uses full-extension drawer slides with BLUMOTION soft-close and a top tier that slides back inside the cabinet on ball-bearing slides. It is also a door mount cutlery drawer, so the included adjustable door mount brackets are required for operation. For installers and serious DIY buyers, this layout helps increase usable drawer organization without changing the cabinet box itself.

See maple cutlery drawer advantages

• Two-tiered drawer layout - The Rev-A-Shelf cutlery drawer doubles up drawer organization so flatware and kitchen tools can be separated in one cabinet opening.
• Pre-assembled drawer box - This replacement drawer box arrives ready to install, which helps reduce shop time and field assembly steps.
• Frameless cabinet design - The wood drawer system is made for frameless cabinet construction only, helping buyers match the product to the correct cabinet type.
• Designed for a 24 inch frameless cabinet with a 22.5 inch opening - The verified opening target helps buyers confirm cabinet fit before ordering.
• Top tier slides back on ball-bearing drawer slides - The upper tray moves out of the way inside the cabinet so users can access the lower storage area.
• Full-extension TANDEM concealed slides - The soft-close cutlery drawer opens fully for better access to contents at the back of the drawer.
• BLUMOTION soft-close - The Rev-A-Shelf cutlery drawer closes smoothly and helps reduce slam at the end of travel.
• 110 lb. rated concealed slides - The verified slide rating gives buyers a clear reference point when reviewing drawer hardware details.
• Adjustable door mount brackets included - The door mount cutlery drawer includes the brackets required for operation, supporting attachment of the existing drawer front.
• Maple wood construction with clear coat finish - The maple cutlery drawer provides a finished wood interior surface intended for durability in cabinet use.

Confirm soft-close cutlery drawer fit

Key specs to confirm: This Rev-A-Shelf cutlery drawer is designed for frameless cabinet construction only. The verified target application is a 24 inch frameless cabinet with a 22.5 inch opening. Buyers should confirm the cabinet opening width, drawer opening condition, and whether the existing cabinet can accept a door mount cutlery drawer with adjustable brackets. Because the unit uses full-extension TANDEM concealed slides with BLUMOTION soft-close and a top tier that slides back on ball-bearing slides, installers should also verify available internal cabinet clearance for both tiers and slide travel. The product data includes a 110 lb. slide rating. Any additional compliance, load use limits, or technical installation details should be confirmed with the manufacturer or technical documentation.

What's included: A fully assembled maple wood cutlery drawer box, full-extension concealed slides with BLUMOTION soft-close, a sliding top tier, and adjustable door mount brackets required for operation. The existing cabinet drawer front is attached by the buyer or installer.

What to verify before ordering: Confirm frameless cabinet construction, a 22.5 inch opening in a 24 inch cabinet, required interior clearance for the two-tier layout, drawer front attachment method, and that your project calls for a replacement drawer box rather than a new cabinet build.

Use a two-tiered cutlery drawer

Use a frameless cabinet cutlery drawer

A two-tiered cutlery drawer fits projects where the cabinet footprint stays the same but the drawer interior needs to work harder. In many kitchens, the main flatware drawer becomes crowded with serving pieces, prep tools, and small utensils. A standard single tray often forces users to stack items or spread tools into multiple cabinets. This Rev-A-Shelf cutlery drawer addresses that problem by adding a second tier inside the same drawer opening.

The verified design is built for frameless cabinet construction only, so this product is best suited to buyers replacing an existing drawer box in a frameless kitchen cabinet. The unit comes pre-assembled, which helps installers who want a more direct swap instead of building a custom insert from scratch. Because it is a replacement drawer box, the existing cabinet drawer front attaches to the unit. The included adjustable door mount brackets are required for operation, which is an important detail for ordering and install planning.

Access is another practical reason buyers choose this product type. The top tier slides back inside the cabinet on ball-bearing drawer slides, allowing access to the lower section without removing trays. The lower drawer uses full-extension drawer slides, so tools stored toward the back remain reachable. The BLUMOTION soft-close action also supports a controlled close in a busy kitchen setting.

This maple cutlery drawer is useful for remodel work, cabinet refresh projects, and service jobs where a homeowner wants better utensil organization without replacing the cabinet box. It is also relevant for installers looking for a wood drawer system with a finished appearance, since the product uses maple wood construction with a clear coat finish. Before purchase, confirm the opening width, frameless cabinet type, and interior clearances needed for the moving upper tier and concealed slide hardware.

Compare soft-close cutlery drawer details

When buyers compare cutlery drawer options, the main differences usually come down to cabinet compatibility, assembly level, slide type, and how the upper storage area is accessed. This Rev-A-Shelf product stands out in practical terms because the verified data clearly defines those points. It is not described as a loose insert or organizer tray. It is a fully assembled replacement drawer box made for a specific frameless cabinet application.

That distinction matters for ordering. A generic organizer may drop into an existing drawer, but this wood drawer system replaces the drawer box itself and works with adjustable door mount brackets. Buyers who need a door mount cutlery drawer should confirm that their drawer front can be attached properly and that the cabinet opening matches the intended size. The verified target is a 24 inch frameless cabinet with a 22.5 inch opening, which gives a clear starting point for fit checks.

Slide details also affect daily use. This soft-close cutlery drawer uses full-extension TANDEM concealed slides with BLUMOTION soft-close, and the top tier moves on ball-bearing slides. That combination supports access to both levels while keeping hardware mostly out of sight. Compared with simpler drawer organizers or unfinished field-built trays, a pre-assembled Rev-A-Shelf cutlery drawer can help standardize the install process and provide a finished maple interior. Buyers should still review technical documents for any project-specific clearance or mounting questions that are not listed in the verified product data.

Ask fit questions about cutlery drawers

Order the right wood drawer system

Wood drawer system buyers usually need clear fit details more than extra sales language. This Rev-A-Shelf cutlery drawer is a pre-assembled maple replacement drawer box for frameless cabinets, designed for a 24 inch cabinet with a 22.5 inch opening. It includes the adjustable door mount brackets required for operation and uses full-extension concealed slides with BLUMOTION soft-close. Before purchase, confirm your cabinet construction, opening size, interior clearance for the sliding top tier, and how your existing drawer front will attach.