Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf cutlery drawer adds organized utensil storage to a kitchen cabinet by replacing an existing drawer box with a pre-assembled two-tier unit. This brand-specific wood drawer system is made from maple with a clear coat finish and is designed for a 36 inch cabinet with a 33 inch opening. The upper tier slides back inside the cabinet on ball-bearing drawer slides, giving access to both storage levels without wasting space. BLUMOTION soft-close full extension slides are included on this version, and adjustable brackets support door mount cutlery drawer operation. For installers working on a face frame cabinet drawer layout, this unit is intended for 1-1/2 inch face frame cabinet construction only. Buyers supply or reattach their own drawer front for a drawer front replacement project.
Key specs to confirm: This wood drawer system is designed for a 36 inch cabinet with a 33 inch opening and for 1-1/2 inch face frame cabinet construction only. Confirm your cabinet opening width, face frame construction, and available depth and height in the existing drawer space before ordering. This Rev-A-Shelf cutlery drawer is a two-tiered drawer box with BLUMOTION soft-close full extension slides and a top tier that moves on ball-bearing slides. Because buyers attach their own drawer front, verify that your front size and mounting layout will align with the included adjustable brackets. If any additional load, compliance, or installation tolerances are needed beyond the verified 90 lb slide rating, confirm them with the manufacturer or technical documentation.
What's included: A fully assembled maple drawer box, BLUMOTION soft-close full extension slides on this model, and adjustable door mount brackets required for operation. The buyer supplies or reuses the drawer front.
What to verify before ordering: Check cabinet width and opening size, confirm 1-1/2 inch face frame construction, measure the drawer cavity for two-tier clearance, and make sure your existing or planned drawer front can be attached to the included door-mount hardware.
A two-tiered cutlery drawer is useful when a standard single drawer does not give enough organized space for flatware, serving pieces, or kitchen tools. In many remodels, the cabinet box is still in good condition, but the existing drawer wastes vertical space. This Rev-A-Shelf cutlery drawer addresses that problem with an upper tier and lower tier inside one cabinet opening. The top section slides back into the cabinet on ball-bearing drawer slides so the lower compartment stays reachable.
For a professional installer, this format can simplify an upgrade when the customer wants better organization without changing the whole cabinet. The drawer box comes pre-assembled, which can reduce field work compared with building a custom insert from scratch. Because this model includes BLUMOTION soft-close full extension slides, the drawer can open fully for access and close with controlled motion. That is useful in busy kitchens where cutlery drawers are opened often.
This door mount cutlery drawer is designed to work by attaching the cabinet drawer front to the unit. Adjustable brackets are included and required for operation, so the installer can align the front during setup. It is also important to note that this is intended for 1-1/2 inch face frame cabinet construction only. If the cabinet uses a different frame style or opening detail, the buyer should confirm compatibility before purchase. For a drawer front replacement project, verify that the front dimensions and reveal will work with the new drawer box and slide path.
Buyers searching for a 36 inch cabinet cutlery drawer should also pay attention to the opening size. The verified fit is for a 36 inch cabinet with a 33 inch opening. Measuring the actual opening is the safest way to avoid ordering the wrong drawer system.
When comparing a wood drawer system like this one to other cabinet storage options, buyers usually focus on construction, slide type, installation method, and how much usable storage the layout creates. This Rev-A-Shelf unit offers a fully assembled maple drawer box with a clear coat finish, which can appeal to buyers who want a finished wood interior rather than a field-built insert. The two-tier format is also a practical difference because it increases storage density inside a single drawer opening.
Another point to compare is access. A standard drawer organizer sits inside one drawer and does not add a second moving level. Here, the upper tier slides back so both levels can be used within the same opening. That can make a real difference in cabinets where every inch matters. Buyers looking for soft-close cutlery drawer options should also note that this version includes BLUMOTION soft-close full extension slides, rather than leaving slide selection to the installer.
Installation style matters too. This product is meant to replace an existing drawer box and use the buyer's own drawer front. That makes it a fit for projects where the cabinet exterior should stay consistent with the rest of the kitchen. Since adjustable door mount brackets are included and required, the front can be attached as part of the operating drawer system. As with any face frame cabinet drawer retrofit, careful measuring is essential. Confirm the 36 inch cabinet application, the 33 inch opening, the 1-1/2 inch face frame requirement, and the space needed for the tiered drawer movement before ordering.
This Rev-A-Shelf cutlery drawer is designed for a 36 inch cabinet with a 33 inch opening.
This cutlery drawer is for 1-1/2 inch face frame cabinet construction only, so other cabinet styles should be confirmed before ordering.
This wood drawer system includes 90 lb BLUMOTION soft-close full extension slides on this model.
This Rev-A-Shelf cutlery drawer requires the buyer to add or reuse a cabinet drawer front.
This door mount cutlery drawer includes adjustable door mount brackets, and they are required for operation.
The top tier slides back inside the cabinet on ball-bearing drawer slides to expose the lower storage area.
This maple cutlery drawer comes fully assembled and is made to replace an existing drawer box.
This drawer system requires confirmation of cabinet width, 33 inch opening size, face frame construction, and clearance for the two-tier movement. Follow manufacturer installation guidance and local building requirements where applicable.
This cutlery drawer is built from maple wood with a clear coat finish.
Soft-close cutlery drawer buyers usually want clear fit details before replacing an existing drawer box, and this model provides several key checkpoints. It is a fully assembled Rev-A-Shelf maple unit for a 36 inch cabinet with a 33 inch opening, built for 1-1/2 inch face frame construction only. BLUMOTION soft-close full extension slides and adjustable door mount brackets are included, while the drawer front is supplied by the buyer. Before purchase, confirm your cabinet opening, front attachment plan, and the clearance needed for the two-tier drawer movement.
Sold In: 1 Each
