Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf cutlery drawer gives frameless cabinet installations a pre-assembled way to organize flatware, knives, large utensils, and wrap storage in one wood drawer system. This maple cutlery drawer is designed for full access frameless 30 inch cabinets with 5/8 inch side panels and a 28.5 inch opening. Rev-A-Shelf builds this tiered cutlery drawer with full extension slides, BLUMOTION soft-close action, and adjustable door mount brackets that are required for operation. The upper tier slides back inside the cabinet on ball-bearing drawer slides, helping users reach lower storage without removing inserts or shifting contents. This kitchen cabinet accessory is intended to replace an existing drawer box, and the buyer adds their own drawer front.
Key specs to confirm: This frameless cabinet cutlery drawer is designed for full access frameless 30 inch cabinetry with 5/8 inch side panels and a 28.5 inch opening. Product data also references full access frameless 30 inch and 36 inch cabinets, so buyers should confirm the exact cabinet application in the manufacturer documentation before ordering. Verify that your cabinet construction is frameless, that the opening matches the specified width, and that your existing drawer front can be attached to the included adjustable door mount brackets. Confirm drawer front size, interior depth, height clearance for the top tier, and any needed space for the top tier to slide back. Any unlisted load, compliance, or additional dimensional details should be confirmed with the manufacturer or technical documentation.
What's included: A fully assembled maple wood cutlery drawer, built-in knife organizer, adjustable compartments, drop-in foil insert, full-extension BLUMOTION soft-close slides, ball-bearing slides for the top tier, and adjustable door mount brackets. The buyer supplies the drawer front.
What to verify before ordering: Confirm frameless cabinet construction only, cabinet opening width, 5/8 inch side panels, drawer front compatibility, required interior clearances, and whether your cabinet is the intended 30 inch application for this specific unit.
A tiered cutlery drawer is useful when a standard drawer no longer keeps up with the amount of flatware, knives, serving tools, and kitchen wrap used in a busy kitchen. In many frameless cabinet layouts, the problem is not only limited width but also poor access to the back of the drawer. This Rev-A-Shelf cutlery drawer addresses that issue with a top tier that slides back inside the cabinet on ball-bearing drawer slides, so the lower section remains reachable.
For a professional installer, this wood drawer system reduces fabrication time because the drawer box arrives fully assembled. Instead of building a custom organizer and fitting multiple inserts, the installer can replace the existing drawer box and attach the customer's drawer front. That makes it a practical fit for remodel work where the goal is to improve storage while keeping the cabinet exterior consistent.
For a homeowner or serious DIY buyer, the built-in knife organizer drawer layout and adjustable compartments help separate sharp tools, larger utensils, and storage bags in one place. The drop-in foil insert adds another dedicated storage zone without needing a loose tray. The maple cutlery drawer construction with clear coat finish also suits buyers who want a wood interior rather than plastic bins.
This soft close cutlery drawer is intended for frameless cabinet construction only. That point matters because face frame cabinets and other opening conditions may not provide the same fit or operation. Buyers should also confirm that the cabinet has a 28.5 inch opening, 5/8 inch side panels, and the proper interior room for the tiered layout. If the exact depth, height, or front attachment details are critical for your project, those should be checked in the manufacturer technical information before purchase.
When buyers compare organizer drawers, the main differences usually come down to cabinet compatibility, how much arrives pre-assembled, and whether the drawer gives access to more than one storage level. This Rev-A-Shelf cutlery drawer stands out by combining a tiered organizer format, a built-in knife organizer, adjustable compartments, and a foil insert in a single wood drawer system.
The included adjustable door mount brackets matter because this is a door mount drawer setup and those brackets are required for operation. That makes the product easier to evaluate for replacement work where the existing drawer front will be reused. The full-extension BLUMOTION soft-close slides also give buyers a clear, verified slide specification rather than an unspecified glide style.
Another practical point is consistency. The product is described as fully assembled maple wood with a clear coat finish, which helps buyers understand what arrives on site and what still needs to be supplied. In this case, the drawer front is not included, so the installer or buyer should plan for that step. Compared with simpler inserts that drop into an existing drawer, this product is a full drawer box replacement. That distinction is important because it affects fit checks, installation planning, and the value of the included organization features.
This Rev-A-Shelf cutlery drawer is designed for frameless cabinet construction only. Follow manufacturer installation guidance and local building requirements where applicable.
This maple cutlery drawer is specified for a 28.5 inch opening and is described for a 30 inch frameless cabinet application.
This wood drawer system requires the buyer to add their own drawer front. It is designed to accept your existing cabinet drawer front.
This door mount drawer includes adjustable door mount brackets, and those brackets are required for operation.
This soft close cutlery drawer uses 90 lb full-extension BLUMOTION slides, and the top tier moves on ball-bearing drawer slides.
This tiered cutlery drawer is built for cutlery, knives, large utensils, storage bags, and foil with its built-in organizer layout.
This knife organizer drawer comes as a fully assembled drawer box, which can replace an existing drawer.
This frameless cabinet cutlery drawer is designed for 5/8 inch side panels, so side thickness should be checked before ordering.
This product data references full access frameless 30 inch and 36 inch cabinets, but buyers should confirm the exact intended cabinet application for this unit before ordering.
This kitchen cabinet accessory requires checking frameless construction, opening width, side panel thickness, drawer front fit, and interior clearance for the sliding top tier.
Soft close cutlery drawer selection is easier when you confirm the cabinet type, opening width, side panel thickness, and drawer front plan before purchase. This Rev-A-Shelf wood drawer system includes the assembled maple drawer box, organizer layout, foil insert, slides, and required door mount brackets, while the drawer front is supplied separately. For the best fit, verify frameless construction only, the 28.5 inch opening, and the clearances needed for the upper tier to slide back and the lower tier to stay accessible after installation.
Sold In: 1 Each
