Rev-A-Shelf 4WTCD Series 16-1/2"W Maple Cutlery Drawer Soft-close Full extension Slides, Door Mount - 4WTCD-419HFLSC-1

Choose a Rev-A-Shelf cutlery drawer

Rev-A-Shelf cutlery drawer gives you a pre-assembled way to add organized utensil storage inside an existing cabinet drawer opening. This Rev-A-Shelf wood drawer system is made from natural maple with a semi-gloss finish and uses concealed full-extension slides with BLUMOTION soft-close action. The two-tiered layout helps separate flatware and kitchen tools while keeping access easy in a base cabinet drawer. This door mount drawer system is designed for 15 in., 18 in., 21 in., and 24 in. base cabinet drawers, and it mounts to the cabinet drawer front, rear, and side walls. The lower drawer offers up to seven compartments, and the sliding top tray also offers up to seven compartments for added sorting without adding another cabinet.

Use a maple cutlery drawer better

• Natural maple construction with semi-gloss finish - The Rev-A-Shelf maple cutlery drawer provides a durable wood interior with a clean appearance that fits many kitchen cabinet styles.
• Pre-assembled drawer box - This wood drawer system arrives ready to install, which helps reduce assembly time on site.
• Two-tiered drawer design - The upper sliding tray and lower compartment area help organize more utensils in one base cabinet drawer opening.
• Up to seven lower compartments - The cutlery drawer helps separate forks, spoons, knives, and small tools for faster daily access.
• Sliding top tray with up to seven compartments - The added tray creates another layer of organized storage without requiring a wider cabinet.
• Full-extension TANDEM concealed slides - Full-extension slides let the drawer open fully so the back compartments are easier to reach.
• BLUMOTION soft-close action - The soft-close cutlery drawer closes smoothly and helps reduce slam wear during regular use.
• 110 lb. rated slides - The Rev-A-Shelf drawer system uses slide hardware rated for substantial drawer loads within the manufacturer's specifications.
• Door mount capability with Figure 8 brackets - The door mount drawer setup supports attachment to the cabinet drawer front for a finished installation.
• TSCA Title VI compliant - The maple cutlery drawer is identified in product data as TSCA Title VI compliant.

Confirm wood drawer system fit

Key specs to confirm: This Rev-A-Shelf cutlery drawer is listed at 16-1/2 in. wide and is designed for 15 in., 18 in., 21 in., and 24 in. base cabinet drawers. Buyers should confirm the actual cabinet drawer opening, inside cabinet clearance, drawer front requirements, and mounting surfaces at the front, rear, and side walls before ordering. The drawer uses 5/8 in. drawer side material and concealed full-extension TANDEM slides with BLUMOTION soft-close. If you need exact depth, height, or detailed opening requirements, confirm those measurements with the manufacturer or technical documentation before purchase. Any additional load, compliance, or installation details beyond the verified 110 lb. slide rating and TSCA Title VI note should also be confirmed in current technical documents.

What's included: Verified product data indicates a complete drawer system with a pre-assembled drawer box, concealed soft-close full-extension slides, a sliding top tray, and Figure 8 door mount brackets. The drawer front is not included. Product data states, just add your drawer front.

What to verify before ordering: Confirm your base cabinet drawer width, opening dimensions, drawer front compatibility, available interior clearance for the sliding top tray, and whether your cabinet can support mounting at the front, rear, and side walls. Also verify that the intended application matches one of the listed base cabinet drawer sizes.

Compare soft-close cutlery drawer details

Use a two-tiered cutlery drawer daily

A two-tiered cutlery drawer is useful when a standard flatware tray no longer keeps pace with the amount of utensils, serving pieces, and small kitchen tools used every day. In a busy kitchen, the common problem is not just lack of width. It is poor use of vertical space inside the cabinet. This Rev-A-Shelf cutlery drawer addresses that issue by stacking storage into two working levels inside one drawer opening.

The lower drawer provides up to seven compartments, while the sliding top tray adds up to seven more. That layout helps a buyer separate daily flatware from prep tools, specialty utensils, or overflow pieces. For remodel work, the pre-assembled format can also save time because the wood drawer system is ready to install into an existing cabinet drawer opening rather than requiring field assembly of the box.

This maple cutlery drawer is designed for 15 in., 18 in., 21 in., and 24 in. base cabinet drawers, so it fits a range of common cabinet plans. The natural maple construction and semi-gloss finish make it appropriate where the inside of the drawer should match other wood drawer components. Because it is a door mount drawer, the installer should plan for attaching the cabinet drawer front and confirm that the cabinet structure allows mounting to the front, rear, and side walls as specified.

The concealed full-extension slides matter in daily use because they allow access to the rear of the drawer organizer. The BLUMOTION soft-close action helps the drawer return smoothly, which is useful in kitchens where drawers are opened often throughout the day. If your project depends on exact inside depth, installed height, or tray clearance above stored items, those dimensions should be confirmed before ordering because they are not fully detailed in the verified data provided here.

Compare this wood drawer system confidently

When buyers compare a wood drawer system, the most important differences usually come down to construction, hardware, organization layout, and install method. This Rev-A-Shelf cutlery drawer is clearly defined in those areas. It uses natural maple construction with a semi-gloss finish, arrives pre-assembled, and includes a two-tiered storage format rather than a single tray. That gives the buyer a more specific picture of how the product is built and how it will function once installed.

The slide package is another practical comparison point. This product uses concealed TANDEM full-extension slides with BLUMOTION soft-close, and the product data lists a 110 lb. rating for the slides. For many buyers, that combination signals a drawer intended for smooth travel and full access rather than partial extension. The included Figure 8 door mount brackets also help clarify the installation style, since the product is meant to work as a complete drawer system that accepts a separate drawer front.

Compared with simpler inserts or trays that just drop into an existing drawer, this soft-close cutlery drawer is a more integrated organizer. It mounts into the cabinet drawer opening and is designed around specific base cabinet drawer sizes. That can make the finished result more consistent, but it also means fit checks are more important. Buyers should confirm cabinet opening dimensions, drawer front planning, and any needed technical dimensions before purchase. For trade users and serious DIY buyers, those checks help avoid ordering a drawer organizer that does not match the cabinet conditions on site.

Ask fit questions before ordering

Order the two-tiered cutlery drawer

Two-tiered cutlery drawer storage works best when the cabinet opening, drawer front plan, and mounting points are confirmed before purchase. This Rev-A-Shelf wood drawer system includes the pre-assembled maple drawer box, sliding top tray, concealed full-extension soft-close slides, and Figure 8 door mount brackets, while the drawer front is supplied separately. Before ordering, verify that your application matches the listed base cabinet drawer sizes and confirm any exact depth or clearance details needed for your installation.