Amerock Kamari Satin Nickel Knob For Cabinets

Amerock Kamari satin nickel knob uses the Kamari collections scalloped surface design, which gives cabinets and drawers a distinct patterned look that reads as designer-grade on finished installs. The 1-3/16 inch (30 mm) diameter face spreads visual weight across the front of the door or drawer, helping proportionally balance small and medium fronts. A 1 inch (25 mm) projection sets the knob off the surface enough to grab comfortably, which supports repeat use on busy kitchen or bath runs. The 3/8 inch (10 mm) base diameter keeps the contact point controlled, which helps seat the knob precisely over standard pilot holes. Zinc construction provides a solid-feeling knob body, which supports a consistent feel when multiple knobs are used across a project. The satin nickel finish presents a muted metallic sheen, which coordinates with many contemporary hinge and faucet finishes.

Key Kamari Knob Details That Support Your Work

• The Kamari collection scalloped surface draws from sand patterns, so the knob face adds texture that visually upgrades plain slab or Shaker fronts without extra millwork steps.
• The 1-3/16 inch (30 mm) diameter spreads pull force over a wider area, which can help doors and drawers feel more secure during operation on heavier fronts.
• The 1 inch (25 mm) projection spaces fingers away from the cabinet surface, which reduces knuckle contact and helps users get a full grip, especially on thicker drawer fronts.
• The 3/8 inch (10 mm) base diameter concentrates the bearing point, which helps the knob sit flat and clean on the face while keeping the footprint tight on narrow stiles.
• The satin nickel finish presents a soft metallic tone, which works well when aligning visible hardware finishes across hinges, pulls, and plumbing in the same room.
• The zinc material creates a sturdy knob body, which supports a consistent feel from one cabinet to the next on multi-room or multi-unit projects.

Cabinet Knob Dimensions For Straightforward Mounting

The 1-3/16 inch (30 mm) diameter gives a clear layout dimension when laying out knob locations from door edges or stile centers. With a 1 inch (25 mm) projection, installers can anticipate how far the knob will stand off the surface, which helps when checking swing paths near walls or adjacent cabinets. The 3/8 inch (10 mm) base diameter provides a predictable bearing circle against the face, which supports crisp seating over a standard drilled hole. Using the specified 8-32 x 1 inch screw size ties the knob to a common cabinet-thread standard, which keeps field adjustments and hardware matching straightforward across a job.

Why This Amerock Kamari Knob Fits Cabinet Projects

Where The Kamari 1-3/16 Inch Knob Works

The Amerock Kamari Series satin nickel 1-3/16 inch diameter knob is built for cabinet and drawer use, which suits typical kitchen, bath, and built-in storage layouts. The decorative scalloped surface from the Kamari collection puts a patterned face on the knob, which adds interest on flat doors and drawer fronts without relying on complex profiles. Its 1-3/16 inch (30 mm) diameter size works well on single-knob drawer applications, where a centered knob needs enough presence to look balanced. The satin nickel finish coordinates with other satin nickel decorative hardware and moldings, which simplifies aesthetic choices across hinges, pulls, and other visible fittings in the same space.

Details That Support Repeatable Knob Installation

The 1 inch (25 mm) projection keeps the pull point consistently off the door or drawer face, which helps layout jigs and drilling templates translate cleanly from one front to the next. A 3/8 inch (10 mm) base diameter provides a compact seating area, which helps the knob align over the drilled hole without covering large areas of the panel. The manufacturer part number BP36820G10 clearly identifies this exact Kamari satin nickel knob, which aids in reordering matching pieces for add-on cabinets or service replacements. The defined 1-3/16 inch (30 mm) diameter combines with the specified projection, giving installers fixed reference points when checking clearances near adjacent knobs, pulls, or nearby trim.

Common Questions About The BP36820G10 Kamari Knob

Select The Kamari Knob For Coordinated Cabinet Runs

The Amerock Kamari Series satin nickel 1-3/16 inch diameter knob BP36820G10 combines zinc construction, a scalloped Kamari face, and defined projection and base dimensions to support consistent, repeatable cabinet installs. For projects calling for satin nickel decorative hardware and moldings, this knob provides a clearly specified option that aligns style and layout across doors and drawers.