Sugatsune Olympia Free Swinging 3/4" Overlay Face-Frame;Frameless Hinges Nickel, 105° Screw-On - 360-26-19T

Sugatsune Olympia Hinge For Precise Cabinet Doors

Sugatsune Olympia hinge is a concealed cabinet hinge designed for 19mm overlay applications on face-frame or frameless cabinets, so it supports a consistent overlay layout across different cabinet constructions. This hinge belongs to the European concealed long arm hinge family, which keeps hardware hidden while allowing full adjustability, helping finished installations look clean and professional. The hinge provides a 105 degree opening angle, giving doors ample swing for everyday access while keeping motion controlled for typical cabinet runs. As a screw-on style hinge, it fastens securely to the door and cabinet, supporting repeatable placement when multiple doors are laid out from the same drilling pattern. The Olympia line is part of Sugatsune America, so it fits into a recognized system of European standard hinges used in many woodworking and cabinet shops.

Key Olympia 85 Degree Hinge Details On The Job

• The hinge is described as a clip-on type, which lets the installer mount the plate and then attach the hinge body in a second step, speeding changeouts and adjustments during cabinet fitting.
• A 3-way adjustment mechanism is built into the hinge, providing depth, vertical, and overlay adjustment, so the installer can fine-tune reveal and alignment after the door is hung.
• The hinge offers depth adjustment of plus 1.5 and minus 2.5 mm, giving forward and backward door movement at the cabinet, useful for aligning doors flush across a run.
• Vertical adjustment of plus or minus 2.5 mm lets the door move up or down on the hinge, helping correct small drilling variances and keep door gaps even.
• Overlay adjustment of plus 0 and minus 4 mm allows the door edge position over the cabinet frame or side to be dialed in, which helps match overlay across pairs and banks of doors.
• The hinge has a load capacity of 6 kg or 13.2 lbs per 2 pieces and 10 kg or 22 lbs per 3 pieces, so door sizing can be planned within those ranges for dependable support.

Mounting And Adjustment For Cabinet Fit Quality

This Olympia concealed cabinet hinge uses a clip-on structure, so once the mounting plate is positioned the hinge body attaches without tools at that step, which keeps door hanging and removal straightforward during finish fitting. The 3-way adjustment with the door installed lets depth, vertical, and overlay settings be corrected on-site, so doors can be tweaked rather than redrilled when reveals need tightening. Depth adjustment of plus 1.5 and minus 2.5 mm gives room to pull doors in or push them out to meet neighboring fronts or face frames. Vertical adjustment of plus or minus 2.5 mm allows small height corrections, which is useful when carcass or face-frame tolerances stack up. Overlay adjustment of plus 0 and minus 4 mm directly affects how much the door covers the cabinet, helping installers achieve consistent overlay across a full job.

Using The 360-26-19T Hinge In Cabinet Projects

Where This Concealed Hinge Fits Best

The Olympia 360-26-19T hinge is specified as a 19mm overlay design, aligning it with projects where the door must cover that amount of frame or side, so layout can be standardized across a job. It is identified as suitable for both face-frame and frameless cabinets, which lets a shop use the same hinge concept in different construction styles. A maximum door width of 600 mm, or 23-5/8 inches, defines where this hinge is intended to carry the load per door, guiding door sizing on wider units. The hinge supports a maximum door thickness of 20 mm, or 13/16 inch, which aligns with many cabinet door programs and helps avoid interference between doors and interiors. Load capacity ratings of 6 kg per 2 pieces and 10 kg per 3 pieces describe how many hinges are used for a given door weight, supporting predictable performance.

Details That Support Repeatable Cabinet Results

This Olympia hinge is part of the Sugatsune Olympia 85 degree hinge family described with a 5-speed adjustable damper, giving multiple damper settings to control door closing behavior across different door sizes and weights. The damper adjustability supports fine-tuning close speed so doors settle in a controlled way rather than slamming, which can extend the usable feel of the installation. The hinge is identified as a clip-on type for easy installation with 3-way adjustment while the door is installed, which simplifies service work and final fit adjustments in the field or shop. The hinge is rated to a maximum door width of 600 mm and thickness of 20 mm, so within those limits the motion and damper settings are designed to operate as specified. A successful 200,000 cycles test is noted, indicating the hinge mechanism and damper were function-tested through repeated openings and closings, supporting confidence when specifying it for regular-use cabinet doors.

Common Questions About This Olympia Cabinet Hinge

Select The Sugatsune Olympia Hinge For 19mm Overlay

The Sugatsune Olympia 360-26-19T concealed hinge combines 19mm overlay geometry, 3-way adjustment, and clip-on installation, giving cabinet shops and installers a repeatable option for face-frame and frameless work. With defined limits for door width, thickness, and load, plus a 105 degree opening angle and tested 200,000 cycle performance, this hinge aligns well with everyday cabinet projects that demand reliable motion and clean reveals. Selecting this Olympia hinge by its 360-26-19T part number aligns specifications, shop drawings, and ordering with the same component for consistent cabinet runs.