Nickel Soft-Close Hinge for 3/4" Overlay Face-Frame and Frameless Cabinets

The Sugatsune Olympia 360-D26-19T is a concealed long arm European hinge in a Nickel finish, built for 3/4 inch overlay doors on face-frame and frameless cabinets with integrated soft-close and a screw-on mount.

Key Features

• Integrated soft-close damps the door over the final degrees of travel so it settles without slamming.
• 3/4 inch overlay, straight arm positions the door to cover the cabinet side at a 3/4 inch overlap.
• 105 degree opening angle gives controlled, practical access suited to face-frame and frameless cabinetry alike.
• Screw-on mount fastens directly to the cabinet with wood screws for a secure, straightforward connection.
• Five-way adjustment lets height, side, and depth be dialed in after the door is hung.
• Nickel finish on steel coordinates with brushed hardware across kitchens, baths, and built-ins.

Where This Hinge Belongs

This hinge is the right call when a project specifies a 3/4 inch overlay on either a face-frame or frameless cabinet box. The 35mm cup bores into the back of the door at 45mm hole spacing, and the arm screws to a matching Sugatsune base plate on the cabinet, which is sold separately. Face-frame installs mount the plate to the stile; frameless installs fix it to the side panel. Either way, the straight arm holds the door at a 3/4 inch overlap over the opening edge. The 105 degree swing is the appropriate geometry here, giving comfortable daily access without the wider arc a wall-adjacent cabinet cannot always accommodate.

Steel Construction in a Nickel Finish

The hinge body is steel with a Nickel finish, a neutral, slightly warm tone that reads as brushed silver alongside pulls, knobs, and drawer slides finished to match. Nickel wears well in kitchen and bath environments and holds its appearance under regular use. For a project where hardware consistency across every visible surface matters, the Nickel finish ties the concealed hinge into the broader hardware palette even though it stays hidden when the door is closed.

Who Reaches for This Hinge

Cabinet shops specifying soft-close across a full run will find this hinge works on both frameless and face-frame boxes without swapping products mid-job. Designers working on mixed-construction projects, where some cabinets are Euro-box and others are traditionally framed, can specify a single SKU across the scope. Contractors doing finish installs appreciate the five-way adjustment, which corrects the reveal without pulling the door and redrilling. This hinge is sized for doors in the 15 to 20mm thickness range. Doors thinner than 15mm or thicker than 20mm need a different hinge matched to that thickness window.

Common Questions

Consistent Hardware, Quiet Close, Clean Reveal

Specify this hinge when the finish plan calls for Nickel, the cabinet mix includes both face-frame and frameless boxes, and a soft, quiet close is part of the spec from the start.