Sugatsune Olympia Hinge 19mm Overlay Use

Sugatsune Olympia hinge 19mm overlay describes a concealed cabinet hinge designed for 19 mm overlay doors, so it suits face-frame or frameless layouts that need consistent overlay across a run of doors. This hinge belongs to the European standard concealed hinge class, so it stays hidden in use while supporting clean cabinet fronts on professional-grade projects. The hinge opens to 105 degrees, which gives typical cabinet doors wide access without stressing the hinge geometry during regular operation. It is specified as self-open, so it pushes the door open at the end of travel instead of relying only on user pull, which helps with predictable opening feel on matched banks of doors. As a concealed cabinet hinge from Sugatsune America, it aligns with modern European-style hardware setups where appearance and repeatable motion matter.

Key Olympia Hinge Details For Cabinet Work

• The hinge is identified as Sugatsune Olympia 360-U26-19T, so it can be matched precisely across replacement or expansion work using the same manufacturer part number.
• The hinge is described as a clip-on type, so the hinge arm engages the plate without tools, which speeds up hanging and removal on multi-door runs.
• The design is noted as self-open, so the hinge actively opens the door near closed position, providing a consistent feel that benefits banks of matching doors.
• The hinge is a European concealed long arm style, so it mounts inside the cabinet and door, supporting clean exterior faces while still allowing adjustment.
• The hinge is part of the concealed cabinet hinges category, so it is suited to modern cabinetry where exposed hinges would conflict with the design intent.

Mounting And 3-Way Olympia Hinge Adjustment

This Olympia hinge uses a screw-on attachment, so the cup and arm fasten to the door and plate with screws for a solid mechanical connection on cabinet jobs. The hinge offers 3-way adjustment, so depth, vertical, and overlay can all be tuned after installation to align doors accurately. Depth adjustment of plus 1.5 mm and minus 2.5 mm lets the door move in and out relative to the cabinet front, which helps bring door faces flush along a run. Vertical adjustment of plus or minus 2.5 mm shifts the door up or down, so reveals along cabinet tops and bottoms can be corrected without re-drilling. Overlay adjustment of plus 0 and minus 4 mm controls how far the door covers the cabinet front, supporting tight alignment between neighboring doors or panels.

Using The Olympia Self-Open Hinge On Projects

Where This Sugatsune Olympia Hinge Fits Best

This hinge is described for 19 mm overlay face-frame and frameless applications, so it works where the door overlays the cabinet front by roughly that amount on either cabinet style. The hinge is specified for maximum door width of 600 mm, or 23-5/8 inches, so doors within that width stay within the tested performance envelope during use. A maximum door thickness of 20 mm, or 13/16 inch, defines the door material range this hinge is built around, which helps keep cup seating and screw bite within intended limits. The load capacity rating lists 6 kg, or 13.2 pounds, when using 2 hinges and 10 kg, or 22 pounds, when using 3 hinges, so typical cabinet doors can be planned within those door weight ranges. The hinge is part of the Olympia 85 degree family in the web description, yet the specific product also carries a 105 degree angle in the SAP description, showing that Olympia versions span different opening angles within the same general design approach.

Adjustment And Motion That Support Clean Results

The Olympia 85 degree hinges in the web description are equipped with a 3-way adjustment mechanism, so all three directions can be tuned with the door installed, which limits downtime when aligning banks of doors. The same description notes a 5-speed adjustable damper, so the hinge allows tuning of closing behavior in several steps for doors within the stated size and weight ranges. The hinge is clip-on type for easy installation and also allows 3-way adjustment with the door installed, so mounting plates can stay fixed while fine-tuning happens at the hinge arm. The product is described as successfully passing a 200,000 cycles test, so the hinge design has been exercised through many open-close operations to confirm motion performance over repeated use. The nickel reference in the product name points to a nickel finish, so the hinge has a metal surface treatment that suits interior cabinet environments where concealed metal hardware is standard.

Common Questions About Olympia Cabinet Hinge Use

Selecting The Sugatsune Olympia Hinge For Work

The Sugatsune Olympia self-open hinge with 19 mm overlay, 105 degree opening, and 3-way adjustment offers a defined setup for concealed European-style cabinet doors. Door width, thickness, and load ratings provide clear planning points when sizing doors on new work or replacements. The clip-on style with screw-on mounting and 3-way adjustment with the door installed supports efficient field work on multi-door cabinets. For projects where a European standard concealed hinge with self-open motion and adjustable damping is needed, this Olympia model provides a clearly specified option.