Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune Olympia is a concealed long-arm European hinge engineered for 3/4 inch overlay doors on face-frame and frameless cabinets, finished in nickel with a self-close spring and screw-on mounting.
This is a 3/4 inch partial-overlay hinge, placing it in the range between full overlay and inset. It suits installations where the door covers the cabinet side by three-quarters of an inch, a geometry common in traditional face-frame kitchens and in frameless boxes that call for a set-back door position. The 35mm cup bores into the back of the door and the arm connects to a base plate fastened to the cabinet. That plate is ordered separately and must match this hinge's brand and series. Screw-on mounting means the plate attaches with wood screws, so no pre-drilled 5mm system holes are needed in the cabinet side, keeping this hinge at home on custom and site-built boxes alike.
The hinge body is steel with a nickel finish. Nickel sits in the mid-tone range, complementary to brushed nickel pulls, satin nickel knobs, and stainless drawer systems, so it integrates cleanly into hardware suites already specified for a project. The Olympia series is a Sugatsune product, engineered to the tolerances the brand is known for in specialty hardware. The door thickness window runs from 15mm to 20mm (roughly 9/16 to 13/16 inch), which covers standard cabinet door stock. For doors outside that range, a different hinge is the right choice.
Cabinet shops and contractors building or replacing face-frame and frameless cabinetry with a nickel hardware package will find this hinge a straightforward spec. It works on renovation jobs where a replacement hinge needs to match an existing nickel finish, and on new builds where the designer has called for a nickel hardware suite throughout. The screw-on base means no dependency on a line-bored 32mm system, which broadens the range of cabinet boxes it fits. Homeowners doing their own hinge replacement can install it with basic tools. For projects where a damped, cushioned close is the requirement rather than a spring-pull close, the soft-close version of this series is the correct selection.
No. The hinge arm connects to a base plate that mounts to the cabinet, and that plate is sold separately. Use a plate matched to the Olympia series from Sugatsune to ensure the arm engages correctly.
No. This hinge is self-close: a spring pulls the door shut from a few degrees open. It closes on its own but does not cushion or slow the final contact. Soft-close uses a damper to slow the door and prevent slamming. If you need a quieter, damped close, choose the soft-close version of this series.
Yes. This hinge works on both face-frame and frameless cabinets when paired with the right base plate for your cabinet construction. Confirm plate compatibility with the Olympia series before ordering.
Hinge count depends on the door's height, width, and weight. As a general guide, doors up to about 40 inches typically use two hinges and taller doors use three or more. The weight rating listed for this hinge is per pair. Consult the manufacturer load table for your specific door dimensions to confirm the count.
When the spec calls for a 3/4 inch overlay, a nickel finish, and a self-close hinge that works on both face-frame and frameless boxes without needing a line-bored cabinet, the Olympia 360-C26-19T covers the job.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SL360HC-19H26-NI Mfr# 360HC-19H26-NI | Olympia Cover Cap For 19mm and 26mm Hinges Steel |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SL360-85 Mfr# 360-85 | Sugatsune Olympia 85° Hinge Angle Limiter 360-85 | ||||
Sold in: 1 Each |  SL360-BCS Mfr# 360-BCS | Sugatsune Olympia 0.7 mm Sheet Metal Spacer, - 360-BCS | ||||
Sold in: 1 Each |  SL360-DP2-P4 Mfr# 360-DP2-P4 | Olympia Hinge Spacer, 2-Holes | ||||
Sold in: 1 Each |  SL360-DP2-P6 Mfr# 360-DP2-P6 | Olympia Hinge Spacer, 4-Holes |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SL360-JIG Mfr# 360-JIG | Olympia Installation Jig for Hinge Mounting Plates |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SL360-D26-19T Mfr# 360-D26-19T | Sugatsune Olympia 105° 19mm Overlay Concealed Hinge Adjustable Soft-Closing Screw-On 360-D26-19T | ||||
Sold in: 1 Each |  SL360-26-19T Mfr# 360-26-19T | Sugatsune Olympia 105° 19mm Overlay Concealed Hinge Adjustable Free-Swinging Screw-On 360-26-19T | ||||
Sold in: 1 Each |  SL360-U26-19T Mfr# 360-U26-19T | Sugatsune Olympia 105° 19mm Overlay Concealed Hinge Adjustable Self-Opening Screw-On 360-U26-19T | ||||
Sold in: 1 Each |  SL360-D26-19T85 Mfr# 360-D26-19T85 | Sugatsune Olympia 85° 19mm Overlay Concealed Hinge Adjustable Soft-Closing Screw-On 360-D26-19T85 | ||||
Sold in: 1 Each |  SL360-26-19T85 Mfr# 360-26-19T85 | Sugatsune Olympia 85° 19mm Overlay Concealed Hinge Adjustable Free-Swinging Screw-On 360-26-19T85 | ||||
Sold in: 1 Each |  SL360-C26-19T85 Mfr# 360-C26-19T85 | Sugatsune Olympia 85° 19mm Overlay Concealed Hinge Adjustable Self-Closing Screw-On 360-C26-19T85 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SL360-P4W-32T Mfr# 360-P4W-32T | Sugatsune Olympia Mounting Plate Standard, 32mm Boring Pattern, - 360-P4W-32T | ||||
Sold in: 1 Each |  SL360-P4W-32T-DS Mfr# 360-P4W-32T-DS | Olympia Mounting Plate 32mm Boring Pattern, Pre-Mounted Screws | ||||
Sold in: 1 Each |  SL360-P6W-30-32T Mfr# 360-P6W-30-32T | Olympia Mounting Plate +7.5mm, 32mm Boring Pattern & 4 Screw Holes | ||||
Sold in: 1 Each |  SL360-P6WT Mfr# 360-P6WT | Olympia Mounting Plate Standard 32mm Boring Pattern & 4 Screw Holes |
