Sugatsune Olympia 85 Degree Hinge For Controlled Doors

Sugatsune Olympia 85 degree hinge gives you a concealed cabinet hinge that opens to 85 degrees, which limits swing and helps keep doors clear of nearby walls or obstacles on tight runs. This hinge is a self-close design, so the mechanism pulls the door shut at the end of travel, helping doors sit consistently against the cabinet without hand-holding every close. As a concealed cabinet hinge, it keeps the hardware out of sight when the door is shut, supporting a clean look on finished installations. The hinge is designed for a 19mm overlay, matching common face-frame and frameless layouts that need a standard overlay reveal across a run of doors. Rated load capacity of 6 kg (13.2 lbs) per two hinges and 10 kg (22 lbs) per three hinges supports typical cabinet doors in kitchens, baths, and casework.

Key Olympia Hinge Details That Support Your Work

• The 3-way adjustment mechanism provides depth adjustment of +1.5 and -2.5 mm, vertical adjustment of plus or minus 2.5 mm, and overlay adjustment of +0 and -4 mm, so you can fine-tune door position after installation to dial in reveals.
• The 5-speed adjustable damper lets you tune the closing action, so you can match the door motion to door weight and application and reduce slamming in day-to-day use.
• The clip on type design allows the hinge arm to attach to the mounting plate without tools, which speeds up hanging doors and simplifies removal for finishing or later service.
• The hinge supports a maximum door width of 600 mm (23-5/8 inches), which helps you plan door sizing and hinge counts confidently on typical cabinet layouts.
• The hinge accepts a maximum door thickness of 20 mm (13/16 inch), so you can pair it with common cabinet door constructions without running into binding at the cup or frame.
• The hinge has successfully passed a 200,000 cycles test, which demonstrates the mechanism is engineered for repeated everyday opening and closing in regular cabinet environments.

Installation And Adjustment Details For This Hinge

This Sugatsune Olympia self-close hinge is a clip on type, so the hinge arm connects to the mounting plate with a snap action instead of screws through slots, which streamlines mounting on both face-frame and frameless cabinets. The design provides 3-way adjustment with the door installed, meaning depth, vertical, and overlay settings can all be corrected from the front without removing the door, which helps during final fitting on a completed run. With its 19mm overlay specification, the hinge supports layouts where the door overlays the cabinet by that amount, supporting consistent reveals across adjacent doors. The screw-on identification in the product name points to a screw-fastened cup style, aligning with common shop tooling and standard drilling patterns on concealed cabinet hinges.

Using This Concealed Hinge In Real Cabinet Projects

Where This Olympia Hinge Fits Best In Cabinets

This concealed cabinet hinge is described for 3/4 inch overlay face-frame and frameless hinges, so it serves both traditional face-frame boxes and frameless casework that require a 19mm overlay door. With an opening angle of 85 degrees, the hinge is suited to cabinets near walls, corners, or tall panels where a full 110 degree or larger swing might cause door interference, which helps when laying out tight banks of cabinets. The maximum door width rating of 600 mm (23-5/8 inches) gives a clear upper bound for single-door spans, useful when planning wider wall cabinets. The 20 mm (13/16 inch) maximum door thickness lets you confidently use common 3/4 inch doors and some slightly thicker constructions without hinge cup conflict. Load capacity ratings of 6 kg (13.2 lbs) per pair and 10 kg (22 lbs) per three hinges provide guidance for distributing hinges along taller or heavier doors so the self-close and damping functions work as intended.

How Olympia Adjustments And Damping Help Your Results

The 3-way adjustment with depth of +1.5 and -2.5 mm allows you to move the door in and out relative to the cabinet front, which is important for getting doors flush to adjacent panels or appliance faces. Vertical adjustment of plus or minus 2.5 mm provides up-and-down tuning at the hinge, helping align rail lines and correct small drilling variations without slotting holes. Overlay adjustment of +0 and -4 mm lets you trim the amount of door overlay toward the hinge side, which is especially helpful when balancing gaps on pairs of doors meeting at the center of a cabinet. The 5-speed adjustable damper lets you set closing resistance, so lighter doors can close smoothly without bouncing and heavier doors can be slowed to a controlled finish. Because Olympia 85 degree hinges are described as combining functionality with top-of-the-line features, the presence of both multi-directional adjustment and multi-speed damping delivers a hinge that supports precise reveals and controlled motion in the same hardware.

Common Questions About The Sugatsune Olympia Hinge

Select This Olympia Hinge For Controlled Overlay Doors

The Sugatsune Olympia self-close hinge with 19 mm overlay, 85 degree opening, and clip on type mounting gives you a concealed solution tailored to controlled swing applications. Its 3-way adjustment with the door installed, combined with the 5-speed adjustable damper and tested 200,000 cycle performance, supports precise reveals and smooth motion over long service. Its specified door width, door thickness, and load capacity ranges align with everyday cabinet doors in kitchens, baths, and built-ins. Use this hinge when you need a European concealed long arm hinge that balances installation speed, adjustment flexibility, and measured 85 degree opening.