Nickel Soft-Close Hinge For 3/4" Overlay Face-Frame and Frameless Cabinets

The Sugatsune Olympia 360-D26-19T85 is a concealed long-arm European hinge in a Nickel finish, built for 3/4" overlay doors on both face-frame and frameless cabinets, with integrated soft-close and screw-on mounting.

Key Features

• Integrated soft-close damps the door through the final degrees of travel so it settles quietly without slamming.
• 3/4" overlay, straight arm positions the door to cover the cabinet side at a 3/4" overlap, with a consistent reveal.
• 85 degree opening angle limits the swing to protect adjacent walls or closely spaced cabinet runs.
• Face-frame and frameless compatibility lets this hinge work on either cabinet construction with the appropriate base plate.
• Five-point adjustment brings doors to an even reveal after installation without removing them.
• Screw-on mounting anchors the hinge to the cabinet for a firm, stable connection.

Where the 85 Degree Swing Earns Its Place

An 85 degree opening is a design choice, not a shortcoming. When a cabinet sits close to a wall, a corner, or a neighboring tall unit, a door that swings fully to 110 degrees can strike an obstruction or clear it by only a finger's width. This hinge stops the door at 85 degrees, which is enough clearance for everyday use and prevents contact with whatever is beside the cabinet. The 35mm cup bores into the back of the door at the standard depth, and the arm connects to a base plate mounted to the cabinet. That plate is sold separately and should be matched to the Olympia series and your cabinet construction. Pair the correct Sugatsune plate for either a frameless side panel or a face-frame stile.

Nickel Finish on a Steel Build

The hinge body is steel with a Nickel finish. Nickel reads as a clean, warm neutral that sits comfortably alongside brushed or polished hardware in natural wood, white painted, and light-stain cabinet interiors. It does not draw attention to itself, which suits installations where the door front is the design statement and the hinge is meant to disappear. The five-point adjustment range keeps the look intact over time: small seasonal shifts in door position can be corrected without taking the door down.

Right Fit for the Job

This hinge suits cabinet installations where restricted swing is the right call and a clean Nickel look ties into the rest of the hardware. Kitchen runs that turn a corner, bath vanities set into a niche, and mudroom or laundry cabinets set against a side wall are all candidates. It works on doors up to 13/16" thick, which covers standard overlay cabinet doors. For doors over 22mm, a thick-door hinge is the better path. Contractors and cabinet shops running frameless boxes or traditional face-frame carcasses can use this hinge on either, provided the plate is matched to the construction type.

Common Questions

A Quiet Close Where Space Is Tight

Specify this hinge when the layout calls for a controlled swing, a soft settle, and a Nickel finish that coordinates with the rest of the hardware without competing for attention.