Grass America Zargen 17-3/8" Drawer Profile Set, 1-11/16" H, White, 12122-04

Grass Zargen Drawer Systems For Fast Assembly

Grass Zargen drawer systems combine a 100 lb rated integrated Euro drawer slide and metal side panel system, so the slide and side function as one unit and streamline drawer construction on repetitive cabinet runs. This Zargen system is described as cost effective, which supports production shops needing consistent results across many cabinets. The design allows users to assemble and install a drawer in two minutes, reducing labor time whenever multiple identical drawers are required. Automatic production capable construction supports use in line-boring or CNC-based workflows where repeatable drilling patterns are already in place. As part of the Grass Zargen drawer system product class from Grass America, this metal drawer side setup provides a defined hardware standard that can be repeated across projects. Drawer material thickness is 1.3mm in a white epoxy finish, providing a uniform appearance that matches other white casework components.

Key Zargen Drawer System Details For Shops

• The integrated Euro drawer slide and metal side panel system combines guiding and side structure in one assembly, so drawer construction uses fewer separate parts during cabinet builds.
• A 100 lb rating supports typical residential and light commercial storage loads, so drawers handle everyday contents within the system design limits.
• The cabinet member design allows use in 32mm cabinet construction, aligning the Zargen system with standard line-bored casework for predictable drilling layouts.
• Automatic production capable configuration suits high-throughput operations, helping shops run consistent drawer boxes on machining centers or jigs.
• The built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, pulling the drawer fully in during normal use.
• Drawer material thickness of 1.3mm in a white epoxy finish provides a metal sidewall with a consistent white surface along the drawer interior.

Installation And Adjustment On Zargen Drawer Systems

The Zargen integrated Euro drawer slide and metal side panel system allows cabinet makers to provide the drawer front, rear drawer panel, and drawer bottom, so the installer builds around the Grass metal sides. Cabinet member design supports use in 32mm cabinet construction, which matches standard boring patterns for casework sides and simplifies drilling setups. The system allows for drawer fronts to be easily adjusted in three ways: height adjustment plus or minus 2mm, side-to-side adjustment plus or minus 1.5mm, and angle adjustment plus or minus 1mm, giving installers fine control of reveals. Standard system extension is 7/8, which defines how far the drawer opens on its original configuration. Using item number GF6200, the slide system becomes fully extendable and existing drawers do not have to be altered, so the opening length can be upgraded within the same drawer layout.

Using This Grass Zargen System In Cabinet Runs

Where This Zargen Drawer System Fits Best

The Grass Zargen drawer system is part of the Grass Zargen drawer system product class within drawer construction systems, so it is intended as a structured solution for new cabinet builds. The integrated Euro drawer slide and metal side panel system creates a defined method where cabinet makers supply only the drawer front, rear drawer panel, and drawer bottom, focusing shop work on cutting panels instead of building full boxes. Cabinet member design that allows use in 32mm cabinet construction ties directly into European-style casework, where vertical panels are already drilled on a fixed grid. In those environments, automatic production capable design helps this system slot into CNC and line-bored operations without changing general case layouts. Drawer systems are available in five drawer side heights, including 1-11/16 inches, so this specific 1-11/16 inch side height version can be matched to shallow top drawers or other narrow-height storage locations.

Why Zargen Features Support Repeatable Results

The system allows for drawer fronts to be easily adjusted in height by plus or minus 2mm, which helps align top and bottom gaps across a bank of drawers when face fronts vary slightly. Side-to-side adjustment of plus or minus 1.5mm lets installers refine left and right reveals so adjacent fronts line up, reducing visible step between doors and drawers. Angle adjustment of plus or minus 1mm gives additional tuning for fronts that need slight twist correction, supporting a square look even when surfaces are not perfect. The standard 7/8 extension defines a controlled opening, which can suit situations where full access is not required on shallow drawers. When the slide system is upgraded to fully extendable using item number GF6200 and existing drawers do not have to be altered, shops can shift from partial to full extension without rebuilding drawer boxes. The built in self-closing feature that automatically closes the drawer within 2-5/8 inches helps fronts sit consistently against the face frame or case edges.

Common Questions About Grass Zargen Drawer Systems

Selecting This Zargen System For Your Project

The Grass Zargen drawer system with 1-11/16 inch side height and 17-3/8 inch depth provides a defined 100 lb rated integrated metal side and slide solution for new cabinet work. Automatic production capable design, 32mm cabinet construction alignment, and three-way drawer front adjustment support efficient installation on repetitive casework. The built in self-closing feature that operates within 2-5/8 inches, together with the white epoxy 1.3mm metal sides, helps achieve consistent appearance and closing behavior across a run of drawers. For cabinet shops building Euro-style casework, this Grass America Zargen system sets a clear hardware platform that can be repeated from job to job.