Zargen 6035 Drawer Side Slide For Fast Assembly

Zargen 6035 drawer side slide with 100lb capacity defines this Grass America metal drawer side and slide system, so drawer boxes support typical residential and light commercial loads without rethinking the layout. The Zargen integrated Euro drawer slide and metal side panel system combines runners and sides in one, so shops do not build separate drawer boxes from loose parts. Automatic production capable design fits line-boring and production workflows, so shops can standardize setups around this system. Drawer material thickness is 1.3mm in a white epoxy finish, so the metal sides present a uniform, wipeable surface around the drawer interior. Drawer systems are available in five drawer side heights, giving shops one system family to cover multiple storage depths where different front heights are planned.

Key Zargen Drawer Details That Save Time

• The Zargen integrated Euro drawer slide and metal side panel system significantly reduces the number of steps required to make a drawer, so production time drops compared with building separate wooden boxes.
• Automatic production capable construction supports batching with drilling equipment, so casework shops can run repeated carcass and drawer builds with the same references.
• Cabinet member design allows for use in 32mm cabinet construction, so the slides align with standard system holes for accurate installations on line-bored case sides.
• Standard system is 7/8 extension, so the drawer clears the face for access while still supporting the rear portion inside the cabinet on the runners.
• Using item number GF6200, the slide system becomes fully extendable and existing drawers do not have to be altered, so upgrades to full access can be planned without rebuilding drawers.

Drawer Slide Mounting And Front Adjustment Features

The cabinet member design allows for use in 32mm cabinet construction, so the mounting lines tie directly into common system hole patterns during layout. The system allows for drawer fronts to be easily adjusted in three ways, so final alignment at installation compensates for small build tolerances. Height adjustment of plus or minus 2mm, side-to-side adjustment of plus or minus 1.5mm, and angle adjustment of plus or minus 1mm let installers fine-tune reveals without re-drilling front fasteners.

Using This Grass Zargen Drawer System On Jobs

Where This Zargen 6035 Drawer Side Slide Fits Best

The Zargen 6035 drawer side slide with 100lb capacity works within the Grass Zargen drawer system category, so it fits projects where metal sided drawers are planned instead of traditional wood boxes. Cabinet maker provides drawer front, rear drawer panel and drawer bottom while this system supplies the integrated metal sides and runners, so fabrication focuses on simple rectangular parts rather than complex joinery. Drawer systems are available in five drawer side heights, including a 1-11/16 inch side option, so shallow drawers can be built for cutlery, office supplies or similar low-profile storage where tall sides are unnecessary. The white epoxy finish on the 1.3mm drawer material provides a bright, neutral interior look that suits most painted or light-toned casework, so designers can specify one color across multiple room styles. The built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, so partial closing at the jobsite or in daily use still results in the drawer pulling itself home against the face plane.

Why Zargen Details Support Repeatable Drawer Alignment

The cabinet member design aligned for 32mm cabinet construction ties slide positions to standard drilling patterns, so installers can repeat the same boring program across many cabinets and expect drawer runners to line up consistently. The system allows for drawer fronts to be easily adjusted in height, side-to-side, and angle, so final reveal gaps can be tuned after the case and drawer are already mounted. Height adjustment of plus or minus 2mm helps correct for minor drilling offsets across stacked drawers, so front rails can visually align in a bank. Side-to-side adjustment of plus or minus 1.5mm allows reveals at the stiles to be evened out, so face frames or slab fronts present consistent margins. Angle adjustment of plus or minus 1mm twists the front slightly, so corner heights match neighboring doors or drawers when the case is not perfectly square. The built in self-closing feature automatically closing within 2-5/8 inches keeps fronts resting consistently at the cabinet face, so reveal work done during installation is maintained during everyday use.

Common Questions About This Zargen Drawer System

Selecting This Slide For Efficient Drawer Runs

This Zargen 6035 drawer side slide with 100lb capacity, 1-11/16 inch side height, and white epoxy 1.3mm metal construction offers an integrated Euro drawer slide and metal side panel system ready for 32mm cabinet construction. The built in self-closing feature, 7/8 extension standard travel, and optional full extension using item number GF6200 give shops a single Grass Zargen drawer system platform that supports shallow storage layouts and production-friendly drilling patterns.