Zargen 6035 Drawer Side Slide with 100lb Capacity, 1-11/16", White Epoxy, 20

Zargen 6035 Drawer Side Slide For Fast Assembly

Zargen 6035 drawer side slide defines an integrated Euro drawer slide and metal side panel system that lets you assemble and install a drawer in two minutes, so cabinet production time drops significantly on every run. This Grass America Zargen drawer system combines the slide and drawer side, which reduces the number of steps required to make a drawer and cuts separate component handling. The cabinet member design works with 32mm cabinet construction, giving you an easy, accurate layout that ties into line-boring equipment and drilling patterns already in your shop. The drawer material thickness is 1.3mm in a white epoxy finish, providing a consistent metal side profile and a light interior color that suits many cabinet programs. With a 100lb capacity, the system supports typical residential and light commercial drawer loads without changing the basic drawer construction workflow.

Key Zargen Drawer Details That Speed Work

• The integrated Euro drawer slide and metal side panel system allows assembly and installation of a drawer in two minutes, which shortens casework build time and keeps production moving with fewer stations.
• The system significantly reduces the number of steps required to make a drawer, so operators follow a simpler sequence and training and repeatability improve across different shifts.
• Automatic production capable design supports use in production lines, allowing the same drawer concept to run efficiently from small batches through higher-volume jobs.
• The cabinet member design allows use in 32mm cabinet construction, so the hardware aligns with standard boring patterns and helps maintain consistent reveals across a run of cabinets.
• The built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, which pulls fronts in uniformly and reduces hand pushing on every cycle.
• The system allows drawer fronts to be adjusted in height, side-to-side, and angle, so installers can fine-tune gaps and alignment after the cabinet is set.

Mounting And Adjustment For Accurate Drawer Fit

The cabinet member design for 32mm cabinet construction ties the slide position to a familiar drilling grid, helping maintain parallel drawer motion and consistent spacing between fronts. Built in self-closing within 2-5/8 inches uses the mechanism to pull the drawer shut, which helps fronts sit flush without repeated manual corrections. The system offers drawer front height adjustment of plus or minus 2mm, so vertical reveals can be dialed in against adjacent fronts. Side-to-side adjustment of plus or minus 1.5mm lets installers bring margins into line when cabinet walls or openings vary. Angle adjustment of plus or minus 1mm helps correct slight racking, so top and bottom gaps present evenly across the width of the front.

Using The Zargen 6035 System In Cabinet Projects

Where This Zargen Drawer Side Slide Fits Best

This Grass Zargen drawer system is part of the Grass Zargen Drawer System product class, so it is intended for projects that standardize on that metal drawer platform. The 1-11/16 inch drawer side height matches one of the five drawer side heights available in the system, which is suited to shallow drawers or upper levels where a low profile is preferred. A 100lb capacity supports everyday drawer use with typical contents while keeping the same metal side format throughout a kitchen or casework run. The white epoxy finish on the 1.3mm thick metal drawer material gives a neutral, clean interior appearance that coordinates easily with many cabinet colors. Because the cabinet member design works in 32mm cabinet construction, the system fits into frameless layouts that rely on patterned line boring and repetitive horizontal references.

Why Zargen Details Matter For Repeatable Results

The integrated Euro drawer slide and metal side panel system means the slide path is built into the drawer side, so alignment between runner and side remains consistent from drawer to drawer. That integration supports automatic production capable setups, where jigs and machinery can reference the same geometry and output predictable results. The standard system is 7/8 extension, which offers a familiar travel distance while retaining support under the drawer, and using item number GF6200 the slide system becomes fully extendable so access can be increased without altering existing drawers. This ability to create a fully extendable slide from the standard system means shop layouts and tooling for drawer boxes stay the same. Built in self-closing automatically finishing the last 2-5/8 inches of travel keeps fronts seated without relying on user technique, which is valuable in multi-user environments.

Common Questions About This Zargen 6035 Drawer Slide

Selecting This Zargen Slide For Your Next Job

The Zargen 6035 100lb drawer slide with 1-11/16 inch metal side height suits projects using the Grass Zargen Drawer System where fast assembly and consistent alignment matter. With a 1.3mm white epoxy metal side, built in self-closing, 7/8 extension as standard, and three-way front adjustment, this Grass America component supports efficient 32mm cabinet construction while maintaining repeatable drawer performance across a run of casework.