
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Allison Value Series pull is a zinc die-cast cabinet handle in the Everyday Heritage family that provides a 3-3/8 in (86 mm) center-to-center grip, giving consistent spacing for drawer or door drilling patterns. The 5-3/8 in (137 mm) overall length extends beyond the mounting holes, offering ample hand clearance along the full pull. A projection of 13/16 in (21 mm) sets the grip out from the front, helping fingers wrap comfortably without scraping finished surfaces. The 1 in (25 mm) width keeps the contact area broad, which supports stable pulls on heavier cabinet fronts. The antique copper finish delivers a warm metal look that visually aligns with Basic Metals collection pieces, keeping runs of hardware visually consistent across a project.
The Everyday Heritage pull uses a 3-3/8 in (86 mm) center-to-center mounting dimension, so hole locations can be laid out on cabinet faces using a consistent offset from edges. With an overall length of 5-3/8 in (137 mm), the handle overhangs the hole spacing, which helps cover minor layout variations on the surface. A projection of 13/16 in (21 mm) establishes a fixed stand-off from the door or drawer face, which is useful when planning clearances near adjacent hardware or trim. The 1 in (25 mm) width defines the footprint across the grain or panel, helping align the pull proportionally on rails, stiles, or drawer fronts.
This Amerock Corporation pull from the Everyday Heritage group is designed for residential or commercial cabinet applications, so it suits kitchen, bath, or casework runs that share similar hardware sizing. The 3-3/8 in (86 mm) center-to-center spacing matches a common drill pattern, which helps when standardizing layouts across multiple rooms or units. Being part of the Basic Metals collection, the antique copper finish visually ties into other Basic Metals pieces, supporting coordinated hardware selections on doors and drawers. The 5-3/8 in (137 mm) overall length allows the pull to span more of the drawer front width, which can be useful on medium-sized fronts where a shorter pull might look underscaled. A zinc die-cast construction means the pull body remains solid under typical cabinet operating forces in both residential and commercial environments.
The defined 3-3/8 in (86 mm) center-to-center measurement lets installers use templates or jigs for repetitive drilling, which supports faster installation with uniform alignment. The 13/16 in (21 mm) projection fixes how far the grip stands off the surface, giving predictability when positioning doors adjacent to walls or tall panels. With a 1 in (25 mm) width, the pull provides a known edge-to-edge footprint, which helps when centering on narrow rails or balancing margins on drawer faces. The antique copper finish offers a consistent surface tone, supporting visually even hardware lines when multiple pulls are aligned on a bank of cabinets. The 5-3/8 in (137 mm) overall length helps span stile transitions or panel details, which can visually bridge joints and create a continuous hardware line. As a zinc die-cast pull, the form remains dimensionally stable, supporting repeatable fit when multiple units from the same series are installed across a project.
The Amerock BP3401AC pull has a 3-3/8 in (86 mm) center-to-center size, which sets the hole spacing and supports consistent drilling on cabinet doors and drawers.
The pull length is 5-3/8 in (137 mm), so it extends past the mounting holes and provides a generous gripping area across the cabinet front.
This Everyday Heritage pull projects 13/16 in (21 mm) from the surface, setting a fixed stand-off that helps keep hands clear of the cabinet face.
The Amerock BP3401AC pull is zinc die-cast, giving it a rigid metal body suited to repeated opening and closing in cabinet use.
The Everyday Heritage pull uses an antique copper finish, providing a warm metal tone that coordinates with other antique copper decorative hardware.
This Amerock Everyday Heritage pull is described as ideal for residential or commercial applications, so it works across a range of cabinet installations.
The Amerock Allison Value Series 3-3/8 in (86 mm) center-to-center antique copper pull BP3401AC offers defined dimensions that translate directly into drilling layouts and alignment on site. With zinc die-cast construction, a 5-3/8 in (137 mm) overall length, and a 13/16 in (21 mm) projection, it is built for everyday cabinet door and drawer operation in residential or commercial projects. For projects needing an antique copper pull that matches Basic Metals styling and Everyday Heritage design language, this model from Wurth Baer Supply aligns appearance with practical installation measurements.
Sold In: 1 Each