Salice Progressa+ 18" Push-to-Open Full Extension Undermount Drawer Slides, Zinc - G7U9P457CXF6

Salice Progressa+ 18 Inch Undermount Drawer Slides

Salice Progressa+ 18 inch undermount drawer slides use a push-to-open, full extension design to move the drawer completely out of the cabinet, which gives clear access to stored items on every job. These slides are built as a full extension drawer runner with a synchronized mechanism for 19 mm, or 3/4 inch, drawer material thickness, so they match common cabinet drawer construction without workarounds. The true progressive action with rack and pinion action coordinates both slides, which helps the drawer travel feel consistent along the full stroke. The slide system offers a load capacity of 154 lb dynamic and 170 lb static, so it supports heavily loaded drawers within those ratings in regular service. This undermount runner is 100 percent made in Italy, which gives a traceable manufacturing origin on every installation. The slides are sold in any quantities, which allows ordering only what a project requires.

Key Drawer Runner Details That Support Workflow

• The full extension drawer runner layout lets the drawer open to its rated length, which exposes the entire drawer box and simplifies access to tools, components, or stored materials.
• The synchronized mechanism for 19 mm, or 3/4 inch, drawer material thickness is built around that panel size, helping the runner interface consistently with typical cabinet drawer side construction.
• The true progressive action with rack and pinion action coordinates both undermount members, which helps the drawer advance smoothly from closed to fully open without staged resistance points.
• The 154 lb dynamic load capacity allows the slides to carry moving drawer loads within that rating, while the 170 lb static load capacity addresses at-rest loading conditions in service.
• The design meets and exceeds ANSI BHMA A156.9-2020 Grade 1 Standard, which ties the slide performance to an established hardware benchmark for cycle and load testing.
• The 100 percent made in Italy construction gives a defined manufacturing source, which supports consistency when using the same runner across multiple cabinetry runs.

Adjustment-Focused Fit For Drawer Installation

The Salice America Progressa+ undermount drawer slides provide height adjustment of plus 2.5 mm, which helps align drawer fronts vertically when cabinet openings vary slightly. The side adjustment of plus or minus 1.5 mm lets the installer fine-tune lateral gaps, supporting even reveals between adjacent drawers or drawer and door combinations. Depth adjustment of plus or minus 3 mm helps bring the drawer front flush with the cabinet face or a neighboring panel, which is important with inset layouts and consistent overlay lines. The push-to-open function is built into the same full extension runner, so one mechanism handles both opening and travel, reducing separate components around the drawer. Together, these adjustments and functions support a fit that can be dialed in at the hardware level after the drawer box and front are mounted.

Using Salice Progressa+ Slides In Cabinet Projects

Where These 18 Inch Slides Are Typically Applied

The Salice Progressa+ 18 inch push-to-open full extension undermount drawer slides from Salice America sit under the drawer, which leaves the drawer sides clear for 19 mm thick material designs. This undermount layout works well anywhere a clean drawer side appearance is important, because the runner stays hidden below the box in use. The product operates as a full extension drawer runner, so storage at the back of an 18 inch drawer can be reached without working around a partially extended slide. The synchronized mechanism built into the runner supports both residential and commercial cabinet applications that run on 19 mm, or 3/4 inch, drawer material thickness. With a load capacity of 154 lb dynamic and 170 lb static, the runner is suited for drawers that carry substantial contents within that range, such as tool, hardware, or supply drawers in woodworking or shop environments.

How Adjustment And Performance Support Repeatable Results

The Progressa+ slide provides height adjustment of plus 2.5 mm, which lets the installer raise the drawer position slightly to align fronts across a cabinet bank when openings vary from nominal. Side adjustment of plus or minus 1.5 mm lets the drawer position shift left or right inside the opening, which supports consistent side reveal gaps and helps drawers clear neighboring fronts. Depth adjustment of plus or minus 3 mm changes how far the front sits relative to the cabinet face, helping align a run of drawers in both inset and overlay layouts. The true progressive action with rack and pinion action keeps both slides synchronized as the drawer moves, so the front tracks straight and resists binding through its 18 inch travel. Meeting and exceeding ANSI BHMA A156.9-2020 Grade 1 Standard ties that performance to a documented standard, which supports repeatable results when the same slide is specified across multiple installations.

Common Questions About Salice Progressa+ Drawer Slides

Select Salice Progressa+ Slides For 19 mm Drawers

The Salice Progressa+ 18 inch push-to-open full extension undermount drawer slides pair a synchronized mechanism with adjustments for height, side, and depth, which supports precise fit in 19 mm drawer material. With 154 lb dynamic and 170 lb static load capacities and Grade 1 performance, these Italian-made runners offer a hardware solution built for demanding drawer applications. Order the Salice America G7U9P457CXF6 model from Wurth Baer Supply to standardize this slide across upcoming cabinet and drawer projects.