Salice Progressa+ 21" Push-to-Open Full Extension Undermount Drawer Slides, Zinc - G7U9P533XXF6

Salice Progressa+ Undermount Slides For 21 Inch Drawers

Salice Progressa+ undermount drawer slides use a full extension drawer runner to let a 21 inch drawer open its full travel, so drawers built around the G7U9P533XXF6 slide give clear access to stored items from front to back. The push-to-open function activates the drawer with a press on the front, so face frame or frameless cabinetry can run handle-free fronts in kitchens, baths, or shop fixtures where a clean look is preferred. A synchronized mechanism with true progressive rack and pinion action keeps both slides moving together, so drawers track smoothly, which supports precise reveals and reduces racking under load. The runner is designed for 19 mm, or 3/4 inch, drawer material thickness, so casework built to that spec fits the slide geometry without extra shims.

Key Salice Progressa+ Features That Save Time

• The full extension drawer runner allows the 21 inch drawer box to travel its entire length, so contents at the very back stay reachable without pulling items forward, which speeds daily use in busy shops and homes.
• The push-to-open action lets the front of the drawer be pressed to release the slide, so cabinets can use flat fronts without pulls, which simplifies layout decisions around hardware and keeps fronts easier to wipe down in work areas.
• The synchronized mechanism with true progressive rack and pinion action keeps both undermount slides working in unison, so motion stays even from the first inch to full extension, which helps prevent binding when drawers carry heavier stored parts.
• The zinc construction of the Salice America runner provides a hard metallic surface along the slide path, so the moving elements bear on a stable track, which supports consistent gliding performance over repeated open-close cycles.
• The design meets and exceeds ANSI BHMA A156.9-2020 Grade 1 Standard, so performance has been validated against demanding drawer slide criteria, which matters when specifying hardware for cabinetry expected to see regular, repeated use.

Undermount Slide Adjustment For Accurate Drawer Fit

The Salice Progressa+ 21 inch push-to-open slide offers height adjustment of plus 2.5 mm on the drawer, so installers can fine tune vertical alignment of the front, which helps correct for small build variances or floor irregularities. Side adjustment of plus or minus 1.5 mm allows the drawer position to shift slightly left or right, which lets reveals at the cabinet face be evened out against doors or neighboring drawers. Depth adjustment of plus or minus 3 mm lets the front be moved in or out relative to the cabinet face, so fronts can be brought perfectly flush or intentionally proud as the design requires. These adjustments work together to dial in the final fit without reworking the drawer box, which supports efficient on-site installation.

Using This Full Extension Undermount Slide In Projects

Where The Salice G7U9P533XXF6 Slide Works Best

The Salice Progressa+ undermount drawer slides are specified for full extension use with 21 inch drawers built from 19 mm, or 3/4 inch, material, so they fit well into cabinet runs designed around those standard carcass dimensions. The push-to-open function suits installations where a cleaner facade is desired, such as modern residential kitchens, bath vanities, or shop cabinets fronting production spaces, because the drawer is activated by a press instead of a pull. The high load capacity of 154 pound dynamic and 170 pound static allows the undermount drawer runner to support heavier contents, which is useful for drawers that hold tools, hardware bins, or dense cookware. As an undermount system in the Drawer Slides & Accessories category, the slide mounts beneath the drawer box, so the hardware stays hidden from view when the drawer is open, which keeps the focus on joinery and front design.

Adjustment And Performance For Repeatable Drawer Results

The synchronized mechanism in this Salice America slide uses true progressive rack and pinion action, so both sides move together throughout the stroke, which keeps the drawer square under load and helps limit side play at full extension. Load ratings of 154 pound dynamic and 170 pound static define how the slide behaves when moving and at rest, so specifiers can match the drawer size and expected contents to the runner capacity without overbuilding the cabinet. Height adjustment to plus 2.5 mm, side adjustment to plus or minus 1.5 mm, and depth adjustment to plus or minus 3 mm give three axes of fine tuning, which helps installers bring fronts into alignment across large banks of drawers. The slide is 100 percent made in Italy, so production of the G7U9P533XXF6 runner is tied to a single manufacturing origin, which supports consistent geometry from set to set on multi-cabinet projects. Meeting and exceeding ANSI BHMA A156.9-2020 Grade 1 Standard shows the full extension undermount drawer runner has been tested against a recognized benchmark, which supports selection in commercial or institutional woodworking where documented performance is part of the specification.

Common Questions About Salice Progressa+ Undermount Slides

Selecting This Slide For Your Next Drawer Run

The Salice Progressa+ undermount drawer slides pair a 21 inch full extension runner with push-to-open action, so they suit modern, handle-free drawer banks in kitchens, baths, or shop cabinets planned around 19 mm drawer material. With height, side, and depth adjustments and a synchronized progressive mechanism, the G7U9P533XXF6 slide offers the alignment control and motion profile needed for precise, repeatable drawer installations. Wurth Baer Supply presents this zinc, 100 percent made in Italy runner for projects that call for Grade 1 performance from an undermount drawer slide system.