Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 24-1/2", Door Height 47-1/4" - 63", 3-Slides, - ALT-ST20-D10M-24
Description
Sugatsune Overlay Pocket Door Kit For Cabinets
Sugatsune overlay pocket door kit is a pocket door hardware solution designed for overlay cabinet doors in multimedia or workspace applications. The kit is categorized as pocket door hardware and uses three slides to move the door, so the door retracts smoothly into the cabinet when open, helping create a clean, unobstructed work area around equipment or shelving. The minimum cabinet depth of 24-1/2 inches sets the cabinet size requirement, which matters when planning cases for AV, office, or storage layouts where the door must fully clear. The specified door height range from 47-1/4 inches to 63 inches defines the practical door panel size this system supports, which helps standardize door construction across multiple cabinets. The product is identified by manufacturer part number ALT-ST20-D10M-24, helping match this system with drawings, ordering, and future replacements.
Key Pocket Door System Details For Projects
- The overlay pocket door system design allows the door to sit over the cabinet opening, which simplifies face treatments and lets installers work with overlay fronts instead of inset doors.
- Overlay amount is up to 3/8 inch (10 mm), which defines how much the door can cover the cabinet front and helps coordinate reveals with adjoining doors and panels.
- Door alignment adjustability is built into the overlay pocket door system, which lets installers fine-tune door position after mounting so reveals stay even around the opening.
- The three-slide configuration supports the pocket door motion, which spreads the load over multiple slides and helps the door travel consistently when opening and closing.
- An overlay damper unit with adjustment screw is part of the system, which lets users moderate the closing action so the door settles more gently against the cabinet.
Overlay Pocket Door Installation And Adjustment Use
The overlay pocket door system with door alignment adjustability allows practical fine-tuning after installation, so small case or hinge location variations can be corrected without rebuilding parts. The overlay amount of up to 3/8 inch (10 mm) defines how far the door can cover the cabinet face, which guides hinge placement and helps align overlay fronts across a run of cabinets. The overlay damper unit with adjustment screw provides a way to adjust closing behavior, giving installers control over how firmly or softly the door engages at the end of travel. The three slides and synchronized board work together to guide the door, so motion remains coordinated as the door moves out of and back into the cabinet.
Applying This Pocket Door Hardware In Workflows
Where This Overlay Pocket Door Kit Fits
This pocket door kit is classified under pocket door slides and pocket door hardware, which aligns it with cabinet and multimedia enclosures where doors need to retract fully out of the way. The minimum cabinet depth of 24-1/2 inches means it suits deeper cases used for equipment, workspace storage, or closets where internal clearance is available. The supported door height range from 47-1/4 inches to 63 inches matches mid-height to taller cabinet doors, so one system can handle doors in that band across a project. The three slides and synchronized board configuration coordinate door travel, which is important in installations where a smooth, predictable motion protects gear behind the door and maintains a professional feel during use.
Why These Pocket Door Details Support Consistency
Door alignment adjustability allows the installed door to be shifted within the hardware limits, which helps achieve consistent gaps and flushness even when cabinet construction tolerances vary slightly. The overlay amount up to 3/8 inch (10 mm) sets a clear design parameter for door sizing and overlay layout, which reduces trial-and-error when matching other overlay doors along the same wall or bank. The overlay damper unit with adjustment screw lets the closing behavior be tuned, so the motion can be matched across multiple doors for a uniform feel in commercial or residential projects. The combination of three slides, three hinges, and three hinge mounting plates organizes the load path along the height of the door, which supports stable motion on taller doors in the specified height range. The manufacturer designation ALT-ST20-D10M-24 ties these performance characteristics to a specific model, which supports repeatable specification and reordering when building standardized cabinets or service spares.
Common Questions About This Overlay Pocket Door Kit
What cabinet depth does this overlay pocket door kit require?
The Sugatsune overlay pocket door kit has a minimum cabinet depth of 24-1/2 inches, which sets the case depth needed so the door can fully retract inside the cabinet without interference.
What door heights are supported by this pocket door hardware?
This pocket door hardware works with door heights from 47-1/4 inches to 63 inches, defining the usable panel size range so doors can be designed confidently within these limits.
How much overlay does the Sugatsune overlay pocket door kit allow?
The kit provides an overlay amount up to 3/8 inch, or 10 mm, which defines how far the door can cover the cabinet face and helps coordinate reveals with adjacent fronts.
How does door alignment adjustability help during installation?
Door alignment adjustability in the overlay pocket door system allows fine positioning after mounting, which helps correct minor construction variances and produce even gaps around the opening.
What is the role of the overlay damper unit with adjustment screw?
The overlay damper unit with adjustment screw lets the user adjust the closing action, so the door settles more gently and consistently against the cabinet face during everyday use.
Why does this pocket door system use three slides?
The system uses three slides to guide the door, which distributes movement and load along the door height, supporting smooth, coordinated retraction within the cabinet opening.
Select This Pocket Door Hardware For Overlay Use
The Sugatsune overlay pocket door kit brings together three slides, overlay-specific hardware, and door alignment adjustability, giving cabinet and workspace projects a defined solution for overlay doors that retract. The minimum cabinet depth of 24-1/2 inches and door height range from 47-1/4 inches to 63 inches provide clear design boundaries when laying out cases and fronts. The overlay amount up to 3/8 inch and the overlay damper unit with adjustment screw help achieve controlled motion and consistent reveals. For projects that call for a defined overlay pocket door system, this ALT-ST20-D10M-24 hardware offers a focused option.