Sugatsune Overlay Pocket Door Kit, Min. Cab. Depth 22-1/2", Door Height 31-1/2" - 47-1/4", 2-Slides, - ALT-ST20-D10S-22

Sugatsune Overlay Pocket Door Kit For Cabinets

Sugatsune overlay pocket door kit is a complete pocket door hardware setup designed to slide an overlay cabinet door back into the cabinet. The kit is specified for a minimum cabinet depth of 22-1/2 inches, so it suits deeper casework where a door needs to retract fully. The recommended door height range is from 31-1/2 inches to 47-1/4 inches, which targets medium to taller cabinet doors often used in multimedia and workspace components. Two slides are provided in the kit, giving the door a defined track path in and out of the cabinet opening for smooth guided travel. This product falls under pocket door hardware and pocket door slides, which positions it for projects where a standard hinged swing door would interfere with nearby equipment or workspace. The kit format supports efficient layout when planning cabinets that must conceal doors when open.

Overlay Pocket Door Details That Help The Job

• The overlay pocket door system is described as having door alignment adjustability, which lets the installer fine-tune the door position relative to the cabinet face so reveals look consistent across adjacent fronts.
• The specified overlay amount is up to 3/8 inch, or 10 mm, so the door edge can overlap the cabinet opening by that distance, which helps coordinate with surrounding overlay fronts in the same run.
• An overlay damper unit with adjustment screw is referenced, allowing the closing motion to be tuned through that screw, which helps control how the door seats against the cabinet for a more controlled final position.
• The product is identified as an overlay pocket door system in the pocket door slides category, which clarifies that it is built specifically to support a door that both overlays the face frame or case and retracts into the cabinet body when opened.

Cabinet Fit, Slide Layout, And Door Movement

The minimum cabinet depth requirement of 22-1/2 inches sets the baseline case depth for layouts using this pocket door hardware, so cabinet dimensions can be planned around that figure. The stated door height capacity of 31-1/2 inches to 47-1/4 inches defines the vertical size window for doors that will run on these slides, which helps align door ordering with the slide system capabilities. Two slides dedicated to the door travel give the assembly a guided in-and-out motion path, which supports stable operation as the door moves between closed and pocketed positions. The overlay pocket door system designation signals that the door sits overlapping the cabinet opening when closed, then retracts into the cabinet opening along the slides, which is useful when clearance in front of the cabinet is limited.

Using This Pocket Door Kit In Real Projects

Where This Overlay Pocket Door System Fits Best

This pocket door kit is grouped under multimedia and workspace components, tying it directly to cabinets that store electronics, equipment, or work tools where a swinging door could obstruct use. The pocket door hardware classification highlights that the system is tailored for applications requiring the door to disappear into the cabinet interior, such as media centers or workspace storage towers. The required 22-1/2 inch minimum cabinet depth aligns with deeper cabinetry often found in these environments, which helps match case construction to the slide and board geometry. The door height range from 31-1/2 inches to 47-1/4 inches fits many upper and mid-height cabinet openings, so the kit can be applied across a variety of tall doors within that band. Because it uses two slides working with a synchronized board, the door motion can be coordinated along the full travel, which benefits taller doors commonly used around desks, equipment enclosures, or utility cabinets.

Details That Support Alignment And Repeatable Results

The web description notes door alignment adjustability, which means the installed door position can be shifted after mounting to dial in clearances, an advantage when cabinets are ganged in long runs. An overlay damper unit with an adjustment screw is specified, so the closing speed or final seating behavior can be tuned at that screw, which helps avoid harsh contact and supports consistent closing feel across multiple doors. The kit description calls out a synchronized board, indicating that the slide action is coordinated through that component, which promotes even travel as the door moves into and out of the pocket. Two hinges and two hinge mounting plates are referenced, pairing the hinges with their mounting interfaces so the door pivots correctly from overlay closed position into the slide path, which supports repeatable alignment when multiple doors are built to the same standard. The manufacturer part number ALT-ST20-D10S-22 ties all these elements together under a single reference, which simplifies reordering the same system for additional cabinets or future expansions.

Common Questions About This Pocket Door Hardware

Select This Kit For Overlay Pocket Door Projects

This Sugatsune America pocket door hardware kit is defined for overlay doors on cabinets with at least 22-1/2 inches of depth and door heights between 31-1/2 inches and 47-1/4 inches, so it targets a clear cabinet size range. Door alignment adjustability and an overlay damper unit with an adjustment screw give control over final fit and movement, which supports cleaner visual lines across a run of cabinets. The synchronized board and two slides guide the door into the cabinet pocket, aligning with multimedia and workspace applications that benefit from doors that retract out of the way. For projects that match these dimensions and overlay requirements, this ALT-ST20-D10S-22 kit provides a clearly defined pocket door system ready to be integrated into cabinet layouts.