Grass America Elite 12" Soft-Close Full Extension 75 lb Undermount Drawer Slide, Zinc, 13184C-03

Concealed Soft-Close Undermount Slide Built for 3/4 Inch Drawer Sides

The Grass Elite 12 inch undermount drawer slide is a full-extension, soft-close concealed runner engineered specifically for drawer boxes built from 3/4 inch material. It suits both face-frame and frameless cabinets, and delivers a clean, hardware-free look with a damped, silent close on every cycle.

Key Features

• Full extension brings the entire 12 inch drawer box out to the cabinet face so nothing in the back stays buried.
• Integrated soft-close damper catches the drawer near the end of travel and settles it shut quietly without slamming.
• Made for 3/4 inch drawer sides, this slide is sized and spaced for thicker stock where the standard 5/8 inch version would not seat correctly.
• 75 lb capacity per pair handles the typical load of a smaller kitchen or vanity drawer with room to spare.
• Roller-bearing carriage on zinc-finished steel runs smoothly and quietly under load throughout years of indoor service.
• Face-frame and frameless compatible means one slide works across both cabinet construction types on the same job.

Where This Slide Fits the Job

The 12 inch length suits shallow drawers in base cabinets, bathroom vanities, and kitchen island end sections where the interior depth is limited. Because this version is built around 3/4 inch drawer sides, it is the right call when the shop is running boxes from 3/4 inch hardwood or plywood rather than the more common 5/8 inch dovetailed stock. It is also a practical choice for replacement work in existing casework where the original box was built from thicker material and the slide needs to match that thickness. At 75 lb per pair, the load rating covers spice drawers, small utensil drawers, and bathroom storage without requiring an upgrade to a heavier-duty model.

Construction and Finish

The Elite runner is steel with a zinc finish — a functional, corrosion-resistant coating that holds up through standard indoor service. The roller-bearing carriage provides smooth travel and quiet operation, and the integrated soft-close mechanism is built into the slide body rather than added as a clip-on accessory. Because the runner mounts beneath the drawer box, the slide is completely hidden when the drawer is open. The zinc finish is a working finish, not a decorative one, and is concealed in the installed position.

Who Should Order This Version

This is the right slide for cabinet shops and contractors building or replacing drawers with 3/4 inch sides in the 12 inch depth class. Homeowners retrofitting a vanity or small kitchen cabinet with thicker shop-built boxes will also find this the correct fit. If the drawer box uses 1/2 to 5/8 inch sides, a different Elite model sized for that thickness is the correct choice — the 3/4 inch and 5/8 inch versions are not interchangeable. For face-frame installations, series-specific rear mounting brackets are required to support the back of the slide; those brackets are sold separately and must be matched to the Elite series.

The Right Slide, Ready to Install

Match the drawer side thickness, confirm your cabinet construction, add the series rear brackets for face-frame work, and this 12 inch Elite undermount delivers full-extension access and a soft, silent close on every drawer it carries.