Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO stainless steel cabinet knob is a round decorative knob designed for cabinet and furniture doors where a compact, modern pull is needed. The knob belongs to EPCO's Aluminum Architectural Pull collection, so it follows a simple architectural style that suits straightforward shop builds and clean residential layouts. The knob body is aluminum with a stainless steel finish, which gives a metallic look while keeping the piece light for everyday cabinet applications. With a stated length or diameter of 1-3/16 inches, this knob offers a small hand contact area that fits comfortably on doors without crowding narrow rails or stile edges. A projection of 1-3/8 inches positions the grip away from the door face, giving enough finger clearance for regular use in busy workspaces or high-traffic household cabinets. The knob is back mounted, so it installs through the door or drawer front from the inside face.
The back mounted configuration on this EPCO KP30-SS stainless steel knob means the installer drives the mounting fastener from the interior side of the cabinet door or drawer front into the knob. This through-bore style suits standard cabinet construction where a clean exterior face is preferred, because only the round 1-3/16 inch knob shows on the outside. The 1-3/8 inch projection establishes a fixed stand-off from the surface, which helps align multiple knobs along a run of doors to the same working depth. The aluminum body with stainless steel finish keeps the part light and straightforward to handle during layout and drilling, which is helpful when repeating the same knob position across multiple cabinet sections.
The EPCO stainless steel 1-1/8 inch (28.5 mm) diameter knob, designated KP30-SS, is positioned for decorative cabinet hardware applications where a small, round pull is preferred over a larger handle. Its classification under Decorative Hardware & Moldings in the Knobs category defines it as a front-of-cabinet component rather than structural hardware, so it suits finished cabinet faces, furniture doors, and drawer fronts that benefit from a discreet pull point. The 1-3/16 inch stated diameter keeps the footprint modest, which is useful on narrow frame members or smaller fronts where larger pulls could dominate the panel. Because it is part of the Aluminum Architectural Pull collection, it visually aligns with similar architectural pulls in the same series, supporting consistent appearance across a project that mixes knobs and other pulls.
The aluminum material with stainless steel finish supports use in everyday cabinet environments where a metallic look is desired without relying on heavier solid stainless components. The 1-3/8 inch projection gives adequate clearance for gripping while keeping the knob close enough to the door to avoid snagging in typical cabinet runs. In cabinet rows that use multiple KP30-SS knobs, the matching diameter and projection help maintain a straight visual line along the fronts, which benefits projects that depend on clean, repetitive hardware placement. The back mounted configuration works with common drilled-through door or drawer fronts, so once positions are laid out, each knob can be set from the interior side in a repeatable pattern.
The defined 1-3/16 inch diameter on this EPCO knob allows precise planning of hardware spacing relative to stile widths and panel edges, which helps avoid overcrowding when multiple doors meet at a corner or in a bank. The 1-3/8 inch projection provides a known stand-off dimension, so installers can predict how far the pull will sit from the surface and coordinate this depth with adjacent components such as neighboring knobs or nearby architectural pulls from the same Aluminum Architectural Pull collection. The aluminum construction keeps each KP30-SS knob light, which limits added mass on doors and drawers and can be useful when several knobs are installed on large cabinet sections.
The stainless steel finish applied to the aluminum knob body supports projects where a stainless appearance is carried across hinges, pulls, and other decorative hardware. Because the knob is back mounted, the working interface is standardized: a single through-hole in the cabinet front accepts the mounting fastener from the interior side, letting the visible side remain a clean, single-piece knob head. This configuration simplifies repeating measurements across multiple cabinets, since each KP30-SS knob centers over its bore with the same orientation and projection. The combination of set diameter, fixed projection, and consistent back mounting gives installers predictable results when laying out hardware lines, aligning pulls from cabinet to cabinet, and matching this knob with other decorative elements in the same project.
The EPCO KP30-SS knob has a stated length or diameter of 1-3/16 inches and a projection of 1-3/8 inches, which defines its footprint on the door and its stand-off from the surface.
The 1-3/16 inch diameter keeps the knob compact on the door face, helping it fit narrow rails and smaller fronts while leaving room between adjacent knobs in multi-door runs.
The EPCO KP30-SS knob is back mounted, so the mounting fastener is driven from the interior side of the door or drawer front into the knob, leaving only the knob visible on the exterior.
The KP30-SS knob is made of aluminum with a stainless steel finish, giving a metallic appearance while keeping the knob lightweight for everyday cabinet use.
The 1-3/8 inch projection positions the knob away from the door surface, providing finger clearance that supports comfortable gripping on frequently used cabinets.
As part of the Aluminum Architectural Pull collection, the EPCO KNOB STAINLESS STL 30MM aligns visually with related pulls, helping maintain a coordinated look across projects.
The EPCO stainless steel cabinet knob KP30-SS combines an aluminum body, stainless steel finish, 1-3/16 inch diameter, and 1-3/8 inch projection to deliver a compact, consistent pull point for cabinet and furniture fronts. Its role in the Aluminum Architectural Pull collection and its back mounted configuration support clean layouts where a simple, repeatable knob is preferred across multiple doors and drawers. For projects targeting a cohesive stainless-look appearance with predictable dimensions and a straightforward through-bore mounting method, this EPCO stainless steel cabinet knob provides a defined option to match decorative hardware lines.
Sold In: 1 Each
