Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO DP Series aluminum pull is a 3 inch (76 mm) center to center handle that gives cabinets and furniture a consistent, repeatable grip point, which helps installers align multiple doors and drawers in a straight visual line. The aluminum architectural pull design ties into contemporary jobs where a metal pull is required for daily use. An anodized polished aluminum finish provides a clear, bright surface, so the pull reads cleanly against painted, laminate, or wood fronts on both commercial and residential projects. The pull length of 6 inches lets hands find the grip quickly, which is useful on frequently used cabinet doors. A projection of 1-1/4 inch creates finger clearance between the pull and door face, supporting comfortable operation for repeated openings. A 3/4 inch width matches common cabinet scale, so the pull looks proportional on standard 3/4 inch fronts.
The back mounted design means the EPCO DP Series aluminum pull fastens from the rear of the cabinet front, so visible faces remain clean and uninterrupted while still holding firmly through the material. This pull is specified for 3/4 inch material thickness, aligning with standard cabinet doors and drawer fronts and simplifying drilling depth choices. With a 3 inch (76 mm) center to center spacing, installers can rely on familiar measurement marks when laying out holes. The 1-1/4 inch projection works with the 3/4 inch material thickness to provide functional knuckle clearance without pulling the handle too far into the walkway. Combined with the 3/4 inch width, these dimensions help the pull sit comfortably on doors and drawers used many times per day.
The DP46-PA aluminum architectural pull, with its 3 inch (76 mm) center to center spacing, fits jobs that call for a common drilling pattern, such as cabinet banks where multiple fronts share the same layout. Its 6 inch length supports use on both doors and drawers, giving consistent sight lines across a full run of cabinets. The pull is designed for 3/4 inch material thickness, which suits standard cabinet construction used in many shops and on many installations. Because the pull is back mounted, it works well on finished fronts where a clean outer face is important, such as kitchen, office, or shop cabinets that are regularly in view. The anodized polished aluminum finish supports projects where a bright metal pull is part of the overall decorative hardware plan.
The defined 3 inch (76 mm) center to center measurement lets installers transfer the same dimension from drawings to drilling jigs, which reduces layout variation from one cabinet to the next. The specified 3/4 inch material thickness keeps the fastener path predictable, which helps when boring from the back side to meet the pull posts accurately. A 1-1/4 inch projection gives enough depth for fingers without pushing the hardware too far off the door, contributing to a smooth open-and-close motion in high-use areas. The 3/4 inch width teams with the 6 inch length to create a handle footprint that sits solidly on a typical door or drawer front, spreading the load across more surface during pulling. The anodized polished aluminum finish brings a consistent surface appearance along the full length of the pull, helping large cabinet elevations look uniform under changing light.
The EPCO DP Series aluminum pull has a 3 inch (76 mm) center to center size, allowing installers to use standard 3 inch boring patterns across cabinet doors and drawers.
The DP46-PA pull has a 6 inch length, giving a longer grip area that works on both doors and drawers where users may grab the handle from different positions.
The DP46-PA back mounted pull is specified for 3/4 inch material thickness, matching standard cabinet door and drawer front construction for straightforward drilling and mounting.
The EPCO DP Series aluminum pull has a 1-1/4 inch projection, providing finger clearance while keeping the handle close to the cabinet face.
The DP46-PA aluminum pull has a 3/4 inch width, giving a footprint that visually aligns with typical 3/4 inch thick cabinet fronts.
The EPCO aluminum architectural pull uses an anodized polished aluminum finish, providing a clear, bright metal look on visible cabinet runs.
The EPCO DP Series aluminum pull combines a 3 inch (76 mm) center to center layout with a 6 inch length, 1-1/4 inch projection, and 3/4 inch width, so it fits smoothly on standard 3/4 inch cabinet fronts. Its back mounted design suits finished doors and drawers where a clean outer face is important. The anodized polished aluminum finish ties into aluminum-based decorative hardware plans on both new installations and upgrades. For projects built around a 3 inch drilling pattern and 3/4 inch material thickness, the DP46-PA aluminum architectural pull delivers a consistent, repeatable handle format across the run.
Sold In: 1 Each
