Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO BP Series 30-1/4 inch pull is a stainless steel bar pull designed as a long handle for doors or cabinet fronts, so larger panels have a solid grasp point along more of their height. The 30-1/4 inch center to center dimension sets the drilling layout for installers, helping align both posts accurately on wider fronts and tall wardrobe doors. The pull uses the BP768-SS model, so it matches other pulls from the same EPCO BP Series when a project calls for a coordinated look. Stainless steel construction forms a rigid bar, which supports firm opening and closing forces on heavier fronts. The stainless steel finish keeps the appearance consistent with other stainless hardware in the same room, simplifying visual coordination across multiple elevations. This pull falls under decorative handles and pulls, so it suits visible locations where both appearance and grip matter.
The 30-1/4 inch center to center dimension dictates the drilling pattern, so installers can mark two fixed points on the door or panel and expect the BP768-SS pull to align correctly. The 33-3/8 inch overall length means the bar extends past the mounting points at each end, which affects how far the handle visually spans across the face of a tall cabinet or pivot door. A 1-27/64 inch projection sets the distance from the mounting surface to the front of the bar, giving reliable knuckle clearance for users pulling at different angles. The pull uses 8-32 x 1 inch screws, which match a common cabinet thread size and depth range, simplifying planning for door thickness within typical cabinet construction.
The EPCO BP Series 30-1/4 inch pull, with its 30-1/4 inch center to center dimension, fits especially well on wide cabinet doors, wardrobe fronts, and tall pantry units where a longer grip improves leverage. Its classification under decorative handles and pulls places it in visible runs of casework, where both function and appearance are critical. The stainless steel material supports use on panels that see frequent opening cycles, such as active kitchen or breakroom cabinets. Because the overall length is 33-3/8 inches, the handle visually balances taller faces, so door proportions look intentional rather than underscaled.
The stainless steel finish on this architectural-style pull coordinates with stainless appliances, hinges, and other exposed components, which matters when aligning hardware with broader project specifications. The EPCO brand and BP Series designation pair it with other EPCO BP pulls, so a shop can repeat the same design language across varying cabinet widths. In millwork packages, this consistency helps drafters and installers plan handle heights and lines that carry across banks of doors.
The defined 30-1/4 inch center to center spacing on the BP768-SS pull lets installers build jigs or templates for repeated drilling on multiple doors, which speeds layout on large cabinet runs. The 1-27/64 inch projection gives a fixed stand-off from the surface, producing consistent shadow lines and hand clearance from one cabinet to the next. Because the pull uses 8-32 x 1 inch screws, shops working within common cabinet door thicknesses can rely on a known fastener length-thread pairing during fabrication and on-site mounting. The 33-3/8 inch overall length helps installers align the bar relative to door edges and rails, aiding visual alignment with neighboring fronts.
Stainless steel construction provides a stable feel when torquing the bar during fastening, which supports tight, repeatable installation across a project. The stainless steel finish works with both painted and wood-grain doors, helping designers specify a single handle style that fits multiple finish schedules. As part of the decorative hardware and moldings category, this handle integrates smoothly into hardware schedules that group pulls, knobs, and related components under one coordinated specification.
The EPCO BP Series 30-1/4 inch pull has a 30-1/4 inch center to center dimension, which sets the exact hole spacing for drilling on cabinet or door fronts.
The BP768-SS stainless steel pull has an overall length of 33-3/8 inches, so it spans a substantial portion of wider or taller doors for better grip coverage.
The EPCO BP Series 30-1/4 inch pull is made of stainless steel, providing a solid bar suitable for repeated pulling forces on active cabinet or door installations.
The stainless steel cabinet pull has a 1-27/64 inch projection, creating consistent finger and knuckle clearance between the door surface and the bar.
The EPCO BP768-SS pull uses 8-32 x 1 inch screws, aligning with a common cabinet thread size to suit typical door thickness ranges.
The 33-3/8 inch architectural pull has a stainless steel finish, coordinating with other stainless hardware and fixtures in the same project.
The EPCO BP Series 30-1/4 inch pull combines a 30-1/4 inch center to center layout, 33-3/8 inch overall length, and 1-27/64 inch projection to handle tall or wide cabinet fronts with dependable grip and clearance. Stainless steel material and stainless steel finish tie into broader hardware schedules where a continuous stainless theme is required. With the BP768-SS designation and 8-32 x 1 inch screw interface, this bar pull fits workflows that rely on defined drilling patterns and familiar fastener sizing. For projects needing a long, stainless steel architectural pull that coordinates across multiple doors, this model aligns cleanly with design and fabrication requirements.
Sold In: 1 Each
