
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
EPCO GP Series 72 inch aluminum pull is a 6 foot stick-on handle designed as an aluminum architectural pull for sliding doors. The 72 inch (1829 mm) length runs along a wide section of the door, so users gain a continuous gripping surface instead of isolated grab points. The pull is made from aluminum with a satin clear anodized finish, which provides a clean metallic look that coordinates with other aluminum components in a project. The 1 inch projection sets the grip out from the door face, giving fingers room to pull the door without scraping knuckles against the panel. This model is back mounted, so it fastens from the rear side of the door for a clean, uninterrupted pull surface on the front. The pull is designed for doors with 1/4 inch material thickness, which aligns the mounting method and projection for that door size.
This EPCO aluminum architectural pull is described as a stick-on pull and back mounted, which means it is secured from the rear of the 1/4 inch thick door while presenting a continuous pull surface on the front. The 6 foot length allows the installer to align the pull straight along the door edge, so the handle position stays consistent from top to bottom. With a 1 inch projection, the pull stands off the surface at a fixed distance, which helps achieve repeatable finger clearance across multiple doors in the same run. The satin clear anodized finish arrives uniform along the 72 inch length, so once installed, the pull reads as a single continuous design element on the sliding door.
This EPCO aluminum architectural pull is part of the decorative hardware and moldings handles and pulls category, so it suits projects where the handle is visible and contributes to the overall look of the sliding door. The 6 foot length allows it to run along a tall door or a wide panel, giving users access to a grip whether the door is fully open or partially closed. Because it is intended for 1/4 inch thick material, it aligns with door constructions that use that panel thickness and lets the back mounted design sit correctly on the door edge. The aluminum construction means the pull coordinates with other aluminum components in the space, tying together tracks, trims, or other visible metal parts in the assembly.
The 72 inch length affects everyday use because a long architectural pull lets users slide the door from various heights or positions without searching for a small handle, which can speed up operation in frequent-use openings. The 1 inch projection establishes a defined space for fingers between the pull and the door face, reducing hand contact with the panel and supporting smoother sliding motion. The satin clear anodized aluminum finish gives a consistent surface across the full length, so the pull presents an even appearance in different lighting conditions common to woodworking and cabinet installations. As part of the EPCO GP Series, this GP15-L-A aluminum handle ties directly to the series sizing and finish choices, which helps installers match it with other GP Series components on similar doors.
The GP15-L-A pull is designed for sliding doors using 1/4 inch thick material, so it matches that panel thickness in both its back mounted installation and overall handle positioning.
The EPCO GP Series 72 inch aluminum pull has a 6 foot, or 72 inch (1829 mm), length, providing a continuous gripping surface along a large portion of the sliding door.
The aluminum architectural pull has a 1 inch projection, which sets the handle out from the door face to create space for fingers and support comfortable sliding action.
This EPCO aluminum pull is back mounted, so it fastens from the rear side of the 1/4 inch thick door, leaving a clean, uninterrupted pull surface on the front.
The GP15-L-A pull is made from aluminum with a satin clear anodized finish, giving a muted metallic appearance that coordinates with other satin aluminum decorative hardware.
The 6 foot length lets the pull span much of the sliding door, so users can grab the handle at various heights and positions for easier opening and closing.
The EPCO GP Series 72 inch aluminum pull GP15-L-A provides a 6 foot aluminum architectural handle with a 1 inch projection for 1/4 inch thick sliding doors. The satin clear anodized finish, long gripping surface, and back mounted design combine into a handle that supports consistent operation on tall or wide panels. For projects using decorative hardware and moldings in aluminum, this stick-on pull offers a defined option when a continuous sliding door handle is needed across the full door height.
Sold In: 1 Each