Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO DP Series aluminum pull uses a 72 inch (1829 mm) length to span tall doors or panels in a single, continuous grip, which keeps the opening motion simple along the full height of the material. This pull is made from aluminum, so it adds minimal weight to large doors while still providing a solid handhold along the entire 6 foot length. The anodized satin clear finish on the aluminum creates a consistent, low-gloss surface, which helps the pull visually blend with many architectural aluminum and modern cabinet styles. The pull is part of the Aluminum Architectural Pull collection, so it is suited to decorative hardware layouts where continuous linear pulls are preferred. The description notes no holes, which means fabricators can drill their own mounting pattern to match specific layouts and hardware spacing on site. Being a handle and pull product class, it is intended as a primary gripping point for doors or panels.
This aluminum architectural pull is 6 feet long, so it is suited to full-height or near full-height doors where a long vertical handle supports comfortable reach. The 3/4 inch width keeps the pull slim across the door face, which can be important where adjacent doors or frames have tight clearances. A projection of 1-1/4 inch from the surface defines the space behind the pull for gripping, supporting a secure handhold without pushing the handle too far into a corridor or walkway. The pull is described as back mounted and specified for 3/4 inch material thickness, so it aligns to common cabinet and door substrates used in many woodworking projects. The no-holes description gives shops flexibility to drill through-holes in precise locations that match their hinge layout, stile width, or existing hardware drilling patterns.
The EPCO DP Series aluminum pull in a 72 inch length fits applications that call for a long, uninterrupted gripping surface on 3/4 inch thick material, such as tall cabinet doors, wardrobe doors, or architectural panels built from that stock. As part of a decorative hardware and moldings category under handles and pulls, it is positioned for visible installations where the pull forms a strong linear design element on the door face. The 3/4 inch width keeps the pull proportionate on narrow stiles and wider panels, so it can run near the edge of the door without dominating the face. Because the pull is anodized satin clear aluminum, it coordinates with other satin aluminum components in a project, such as trims or frames, supporting a consistent appearance across the elevation. The 6 foot length also allows fabricators to cut or position the pull so it aligns with specific design features, such as top reveals or mid-rail breaks, while still presenting a continuous handle zone for users.
The DP46-L-A aluminum pull is designated as back mounted for 3/4 inch material thickness, which means the mounting approach is chosen around that common door and panel dimension, helping simplify drilling setups in a woodworking shop. The no-holes characteristic means the pull arrives without pre-drilled points, allowing fabricators to place their own through-holes at exact heights and offsets that suit project-specific hardware spacing or centerline requirements. With a 1-1/4 inch projection and 3/4 inch width, the pull presents known dimensions at layout time, so drafters and installers can plan clearances to adjacent doors, walls, or casework accurately. The 6 foot length simplifies alignment in layouts where multiple tall doors share the same handle length, because each DP Series pull can be located to maintain consistent top or bottom offsets from the door edges. The anodized satin clear finish on aluminum offers a uniform surface, so field modifications such as cut-to-length ends can integrate visually when executed with clean cuts and careful edge preparation.
The EPCO DP Series aluminum pull in this model has a 72 inch (1829 mm) length, which spans tall doors or panels to create a continuous vertical gripping surface.
The DP46-L-A pull is specified for 3/4 inch material thickness, so its back mounting style matches common cabinet and architectural door substrates using that thickness.
The DP46-L-A aluminum pull has a 1-1/4 inch projection, setting the stand-off distance to provide finger clearance while keeping the pull relatively close to the door face.
This 6 foot EPCO DP Series pull uses an anodized satin clear aluminum finish, giving it a consistent, low-gloss metallic look that coordinates with satin aluminum hardware.
The aluminum architectural pull is back mounted on 3/4 inch material, so fasteners are installed from the rear of the door or panel into the pull body.
The 3/4 inch width defines the face coverage of the pull, helping installers position it near door edges or frame lines while maintaining consistent sightlines.
The EPCO DP Series aluminum pull DP46-L-A uses its 72 inch length, back mounting, and 3/4 inch material specification to support tall doors and panels that rely on a continuous handle. The anodized satin clear aluminum finish and 3/4 inch width provide a slim, architectural profile that works well across modern casework and door runs. With a 1-1/4 inch projection from the face, the pull establishes predictable clearance for gripping and layout. For projects built around 3/4 inch thick material where a 6 foot aluminum architectural pull is required, this model offers defined dimensions and a consistent satin clear appearance.
Sold In: 1 Each
