Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
bronze glass clip from EPCO secures glass or mirror at 1-1/4 inch length, giving installers a compact hold that suits small panel edges and tight frame layouts. The clip belongs to EPCO's Aluminum Architectural Pull collection, so it fits projects built around that architectural pull style. Its aluminum construction provides a light but rigid body, helping the clip hold glass without adding bulk at the door edge. A bronze finish on the aluminum creates a darker visual accent, supporting jobs where trim and pulls follow bronze tones. The clip functions as a back mounted fastener, so it works from the rear side of the glass or mirror panel in systems designed for that orientation. A 9/32 inch projection sets how far the clip extends off the mounting surface, which helps control clearance against adjacent frames. The 3/8 inch width defines its footprint on the glass edge during layout.
This clip uses a back mounted design, so it anchors from the rear side of the glass or mirror in systems built for that orientation. That mounting style lets the working face of the clip sit cleanly over the glass edge while the fastener interface stays behind the panel. With a 1-1/4 inch length and 3/8 inch width, each clip occupies a compact rectangle on the glass, which supports layouts where clips must clear pulls or frame details. The 9/32 inch projection determines how far the clip body stands off the mounting surface, influencing door swing or clearance where glass passes close to fixed members. Aluminum construction keeps the component light, which suits glass doors and mirror panels where added mass at the edges can affect movement.
This EPCO bronze glass clip sits in the Aluminum Architectural Pull collection, so it fits projects that use that pull line on glass doors or mirror frames. The 1-1/4 inch length makes it suitable for holding smaller sections along a glass or mirror edge, helpful on narrow doors or vertical panel runs. With a 3/8 inch width, the clip occupies limited space along the edge, which benefits layouts that combine multiple clips with pulls on the same stile. The bronze finish visually supports installations using bronze-toned pulls, hinges, or frames, helping hardware read as one coordinated set. Because the clip is back mounted, it suits assemblies where the installer accesses the rear side of the glass or mirror for fastening, such as framed doors or panels with a service side.
The defined 1-1/4 inch length allows installers to repeat clip spacing along a run of glass, improving consistency from panel to panel. A 9/32 inch projection gives a predictable stand-off, which helps keep glass aligned in relation to surrounding pulls and frames when the same clip is used across a job. The 3/8 inch width concentrates the holding area, so the installer can position the clip away from corners or hardware intersections with more control. Aluminum material reduces weight at every fastening point, which can help doors maintain smoother movement over time when several clips are used. The bronze finish provides a uniform surface color, giving completed installations a consistent appearance when multiple EPCO bronze glass clips and architectural pulls share the same facade.
The EPCO 2004-BZ is a mirror and glass clip in the Aluminum Architectural Pull collection, so it serves as a fastener for glass or mirror panels in that hardware family.
The clip length is 1-1/4 inch, which defines how much of the glass or mirror edge each clip supports during layout and spacing along a panel.
The clip is made from aluminum with a bronze finish, giving a light metal body with a bronze-toned surface that matches bronze architectural pulls.
The projection is 9/32 inch, setting how far the clip body stands off the mounting surface and affecting clearances near frames or adjacent panels.
The width is 3/8 inch, so the clip covers a narrow strip on the glass or mirror edge, which helps maintain a more open glass appearance.
The back mounted design means the clip fastens from the rear side of the panel, leaving the front face to present the bronze-finished clip over the glass edge.
The EPCO bronze glass clip, part number 2004-BZ, offers a 1-1/4 inch long aluminum body with 3/8 inch width and 9/32 inch projection for controlled glass edge support. Its bronze finish aligns with Aluminum Architectural Pull hardware, helping projects maintain a consistent visual line on glass doors and mirror frames. With a back mounted format, the clip suits assemblies designed for fastening from the rear side of the panel. For work that calls for a compact, bronze-toned clip within the EPCO architectural pull family, this mirror and glass clip meets those defined dimensions and finish requirements.
Sold In: 1 Each
