Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
EPCO DP41-L-A aluminum pull provides a continuous 72 inch gripping surface, so long doors or panels get one uninterrupted handle point along the full 6 foot length. The DP series pull is made from aluminum, giving a metal grip surface suited to architectural and cabinet applications. Its satin clear anodized aluminum finish creates a uniform surface that fits with other anodized components in a project. The pull is back mounted, so it fastens from the rear side of the material and leaves the front face free of visible fastener heads. This DP series model is specified for material thickness from 1/2 inch to 7/8 inch, which targets many common panel and door constructions. By combining defined material thickness range, fixed 6 foot length, and back mounted design, this pull establishes a predictable layout for repetitive installations.
This 6 foot aluminum architectural pull is back mounted, so fasteners pass through the door or panel and engage the pull from the rear. That layout positions the visible aluminum profile on the front face without exposed fastener heads. The specified material thickness range of 1/2 inch to 7/8 inch defines where the pull is intended to be used, guiding its application on doors and panels built within that thickness band. With a fixed 72 inch length, installers can plan door heights and pull placement around a known dimension, which supports consistent handle layout across multiple openings. The 1-9/16 inch projection sets the working distance off the surface, shaping hand clearance in front of doors, cabinet panels, or architectural elements.
The EPCO DP series 72 inch anodized satin clear aluminum pull is part of an aluminum architectural pull collection, positioning it for use where a long, straight handle line is desired on doors or panels. Its 6 foot length suits tall cabinet fronts and architectural panels that benefit from a continuous vertical pull. The pull is designed for material thickness from 1/2 inch to 7/8 inch, which corresponds to many panel and door constructions in woodworking and architectural work. Because the pull is back mounted, it applies to installations where fasteners are accessed from the rear face, such as doors or panels that can be reached from the inside during installation.
The 6 foot aluminum architectural pull provides a fixed 72 inch reference length, helping installers standardize handle height and alignment across a bank of tall openings. Its aluminum material maintains a continuous metal profile, so each installed pull presents the same cross section along the full span. The satin clear anodized aluminum finish is applied to the pull, which supports a unified look when several pulls are used in the same area. With a projection of 1-9/16 inch, the pull stands out from the surface a known distance, aiding layout in relation to adjacent panels, reveals, or nearby hardware. The specified 1/2 inch to 7/8 inch material thickness range defines the clamping zone for the back mounted connection, so installations within that band follow a consistent fastening relationship between the pull body and the door or panel core.
The EPCO DP41-L-A aluminum pull has a 72 inch length, described as 6 feet, which lets it run along most of a tall door or panel for a continuous grip area.
The EPCO DP41-L-A aluminum pull uses a back mounted design, meaning it is fastened from the rear side of the material so the front face shows only the pull profile.
The EPCO DP41-L-A pull is made from aluminum with a satin clear anodized aluminum finish, giving a consistent metal appearance across the full 6 foot length.
The EPCO DP41-L-A aluminum pull is specified for material thickness from 1/2 inch to 7/8 inch, targeting many common door and panel constructions.
The EPCO DP41-L-A aluminum pull has a projection of 1-9/16 inch, setting the distance between the mounting surface and the gripping edge for hand clearance.
The EPCO DP41-L-A 6 foot aluminum pull spans much of a tall door height, presenting a long, continuous handle section that can be grasped at various points.
The 6 foot EPCO DP41-L-A aluminum architectural pull pairs a 72 inch length with a satin clear anodized aluminum finish and back mounted design, so it suits tall doors or panels built from 1/2 inch to 7/8 inch material. At Wurth Baer Supply, this DP series pull sits within a broader decorative hardware and moldings assortment, helping align long aluminum pulls with matching project hardware choices. For projects that call for a continuous metal handle line and defined projection of 1-9/16 inch, this model offers a clearly stated size and installation approach for planning layouts.
Sold In: 1 Each
